Development and evaluation of 4WSS electric-driven chassis for high-clearance sprayer

IntroductionThe high clearance sprayer with conventional steering mechanisms, as an intelligent spraying machine, is frequently stuck or broken in muddy fields due to the excessive torque load.MethodsA Four-Wheel Self-Steering (4WSS) electric-driven chassis with a smaller turning radius and better passability is developed to handle complex agricultural terrains. The 4WSS chassis is mainly composed of two custom-designed steering bridges and four in-wheel drive motors. It can achieve steering and driving forward simultaneously through coordinate differential speed control of drive motors, saving a set of dedicated servo steering systems and requiring less torque during steering compared to conventional structures. A kinematic model depicting the speed relationships between four wheels is established via geometric analysis, and a Speed Distribution Controller (SDC) is designed to accomplish locomotion objectives.ResultsExperimental results demonstrate the effectiveness of the new prototype 4WSS chassis system in tracking speed and steering angle. Compared to conventional agricultural chassis, the 4WSS chassis has a smaller turning radius of 2,877 mm. DiscussionThe 4WSS chassis exhibits superior performance in typical field conditions, including muddy terrain, deep gullies, and ridges

Dynamic Modeling and Analysis of Omnidirectional Wheeled Robot: Turning Motion Analysis

This paper presents the dynamic modeling of a four-mecanum-wheeled mobile robot (4MWMR) to be assessed for frequent turning motion. Overdriven factor in this kind of vehicle motion is one of the issues that need to be tackled for safety and energy efficiencies reasons especially in its turning region. Therefore, this study has taken initiative to analyzing 4MWMR through a structure of mathematical model starting from the inverse kinematics calculation. Moreover, the dynamic model of 4MWMR was calculated using Euler Lagrange approach as a part of the model for torque and force assessment. The analyses are done by using the data history of the experiment of an actual 4MWMR platform as trajectory input to kinematics and dynamics model that connected with 4MWMR transfer function plant. Finally, the performance of 4MWMR parameters; wheel velocity, torque and vehicle axial forces; are demonstrated. From the sample of turning point input, the results show that 4MWMR performing different speed of wheels at different poles during turning session as well as torques. Vehicle longitude force shows the highest since the vehicle is a holonomic system used more force on longitude and latitude axes instead of rotational force on the body

Actuators for Intelligent Electric Vehicles

This book details the advanced actuators for IEVs and the control algorithm design. In the actuator design, the configuration four-wheel independent drive/steering electric vehicles is reviewed. An in-wheel two-speed AMT with selectable one-way clutch is designed for IEV. Considering uncertainties, the optimization design for the planetary gear train of IEV is conducted. An electric power steering system is designed for IEV. In addition, advanced control algorithms are proposed in favour of active safety improvement. A supervision mechanism is applied to the segment drift control of autonomous driving. Double super-resolution network is used to design the intelligent driving algorithm. Torque distribution control technology and four-wheel steering technology are utilized for path tracking and adaptive cruise control. To advance the control accuracy, advanced estimation algorithms are studied in this book. The tyre-road peak friction coefficient under full slip rate range is identified based on the normalized tyre model. The pressure of the electro-hydraulic brake system is estimated based on signal fusion. Besides, a multi-semantic driver behaviour recognition model of autonomous vehicles is designed using confidence fusion mechanism. Moreover, a mono-vision based lateral localization system of low-cost autonomous vehicles is proposed with deep learning curb detection. To sum up, the discussed advanced actuators, control and estimation algorithms are beneficial to the active safety improvement of IEVs

Trends in vehicle motion control for automated driving on public roads

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed

Stability Control of Electric Vehicles with In-wheel Motors

Recently, mostly due to global warming concerns and high oil prices, electric vehicles have attracted a great deal of interest as an elegant solution to environmental and energy problems. In addition to the fact that electric vehicles have no tailpipe emissions and are more efficient than internal combustion engine vehicles, they represent more versatile platforms on which to apply advanced motion control techniques, since motor torque and speed can be generated and controlled quickly and precisely. The chassis control systems developed today are distinguished by the way the individual subsystems work in order to provide vehicle stability and control. However, the optimum driving dynamics can only be achieved when the tire forces on all wheels and in all three directions can be influenced and controlled precisely. This level of control requires that the vehicle is equipped with various chassis control systems that are integrated and networked together. Drive-by-wire electric vehicles with in-wheel motors provide the ideal platform for developing the required control system in such a situation. The focus of this thesis is to develop effective control strategies to improve driving dynamics and safety based on the philosophy of individually monitoring and controlling the tire forces on each wheel. A two-passenger electric all-wheel-drive urban vehicle (AUTO21EV) with four direct-drive in-wheel motors and an active steering system is designed and developed in this work. Based on this platform, an advanced fuzzy slip control system, a genetic fuzzy yaw moment controller, an advanced torque vectoring controller, and a genetic fuzzy active steering controller are developed, and the performance and effectiveness of each is evaluated using some standard test maneuvers. Finally, these control systems are integrated with each other by taking advantage of the strengths of each chassis control system and by distributing the required control effort between the in-wheel motors and the active steering system. The performance and effectiveness of the integrated control approach is evaluated and compared to the individual stability control systems, again based on some predefined standard test maneuvers

Compendium in Vehicle Motion Engineering

This compendium is written for the course “MMF062 Vehicle Motion Engineering” at Chalmers University of Technology. The compendium covers more than included in that course; both in terms of subsystem designs and in terms of some teasers for more advanced studies of vehicle dynamics. Therefore, it is also useful for the more advanced course “TME102 Vehicle Modelling and Control”.The overall objective of the compendium is to educate vehicle dynamists, i.e., engineers that understand and can contribute to development of good motion and energy functionality of vehicles. The compendium focuses on road vehicles, primarily passenger cars and commercial vehicles. Smaller road vehicles, such as bicycles and single-person cars, are only very briefly addressed. It should be mentioned that there exist a lot of ground-vehicle types not covered at all, such as: off-road/construction vehicles, tracked vehicles, horse wagons, hovercrafts, or railway vehicles.Functions are needed for requirement setting, design and verification. The overall order within the compendium is that models/methods/tools needed to understand each function are placed before the functions. Chapters 3-5 describes (complete vehicle) “functions”, organised after vehicle motion directions:\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 3:\ua0Longitudinal\ua0dynamics\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 4:\ua0Lateral\ua0dynamics\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 5:\ua0Vertical\ua0dynamicsChapter 1 introduces automotive industry and the overall way of working there and defines required pre-knowledge from “product-generic” engineering, e.g. modelling of dynamic systems.Chapter 2 also describes the subsystems relevant for vehicle dynamics:• Wheels and Tyre\ua0• Suspension\ua0• Propulsion\ua0• Braking System\ua0• Steering System\ua0• Environment Sensing Syste

Compendium in Vehicle Motion Engineering

This compendium is written for the course “MMF062 Vehicle Motion Engineering” at Chalmers University of Technology. The compendium covers more than included in that course; both in terms of subsystem designs and in terms of some teasers for more advanced studies of vehicle dynamics. Therefore, it is also useful for the more advanced courses, such as “TME102 Vehicle Modelling and Control”.The overall objective of the compendium is to educate engineers that understand and can contribute to development of good motion and energy functionality of vehicles. The compendium focuses on road vehicles, primarily passenger cars and commercial vehicles. Smaller road vehicles, such as bicycles and single-person cars, are only very briefly addressed. It can be mentioned that there exist a lot of ground-vehicle types not covered at all, such as: off-road/construction vehicles, tracked vehicles, horse wagons, hovercrafts, and railway vehicles.Functions are needed for requirement setting, design and verification. The overall order within the compendium is that models/methods/tools needed to understand each function are placed before the functions. Chapters 3-5 describes (complete vehicle) “functions”, organised after vehicle motion directions:\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 3:\ua0Longitudinal\ua0dynamics\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 4:\ua0Lateral\ua0dynamics\ub7\ua0\ua0\ua0\ua0\ua0\ua0\ua0\ua0 Chapter 5:\ua0Vertical\ua0dynamicsChapter 1 introduces automotive industry and the overall way of working there and defines required pre-knowledge from “product-generic” engineering, e.g. modelling of dynamic systems.Chapter 2 also describes the subsystems relevant for vehicle dynamics:• Wheels and Tyre\ua0• Suspension\ua0• Propulsion\ua0• Braking System\ua0• Steering System\ua0• Environment Sensing SystemThe compendium is released in a new version each year, around October, which is the version your read now. A "latest draft" is more frequently updated and often includes some more, sometimes unfinished, material: https://chalmersuniversity.box.com/s/6igaen1ugcjzuhjziuon08axxiy817f

Advances of Italian Machine Design

This 2028 Special Issue presents recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications. It contains selected contributions that were accepted for presentation at the Second International Conference of IFToMM Italy, IFIT2018, that has been held in Cassino on 29 and 30 November 2018. This IFIT conference is the second event of a series that was established in 2016 by IFToMM Italy in Vicenza. IFIT was established to bring together researchers, industry professionals and students, from the Italian and the international community in an intimate, collegial and stimulating environment

Optimal torque vectoring control strategies for stabilisation of electric vehicles at the limits of handling

The study of chassis control has been a major research area in the automotive industry and academia for more than fifty years now. Among the popular methods used to actively control the dynamics of a vehicle, torque vectoring, the method of controlling both the direction and the magnitude of the torque on the wheels, is of particular interest. Such a method can alter the vehicle’s behaviour in a positive way under both sub-limit and limit handling conditions and has become even more relevant in the case of an electric vehicle equipped with multiple electric motors. Torque vectoring has been so far employed mainly in lateral vehicle dynamics control applications, with the longitudinal dynamics of the vehicle remaining under the full authority of the driver. Nevertheless, it has been also recognised that active control of the longitudinal dynamics of the vehicle can improve vehicle stability in limit handling situations. A characteristic example of this is the case where the driver misjudges the entry speed into a corner and the vehicle starts to deviate from its path, a situation commonly referred to as a ‘terminal understeer’ condition. Use of combined longitudinal and lateral control in such scenarios have been already proposed in the literature, but these solutions are mainly based on heuristic approaches that also neglect the strong coupling of longitudinal and lateral dynamics in limit handling situations. The main aim of this project is to develop a real-time implementable multivariable control strategy to stabilise the vehicle at the limits of handling in an optimal way using torque vectoring via the two independently controlled electric motors on the rear axle of an electric vehicle. To this end, after reviewing the most important contributions in the control of lateral and/or longitudinal vehicle dynamics with a particular focus on the limit handling solutions, a realistic vehicle reference behaviour near the limit of lateral acceleration is derived. An unconstrained optimal control strategy is then developed for terminal understeer mitigation. The importance of constraining both the vehicle state and the control inputs when the vehicle operates at the limits of handling is shown by developing a constrained linear optimal control framework, while the effect of using a constrained nonlinear optimal control framework instead is subsequently examined next. Finally an optimal estimation strategy for providing the necessary vehicle state information to the proposed optimal control strategies is constructed, assuming that only common vehicle sensors are available. All the developed optimal control strategies are assessed not only in terms of performance but also execution time, so to make sure they are implementable in real time on a typical Electronic Control Unit