2,012 research outputs found
Detailed design of a resonantly-enhanced axion-photon regeneration experiment
A resonantly-enhanced photon-regeneration experiment to search for the axion
or axion-like particles is described. This experiment is a shining light
through walls study, where photons travelling through a strong magnetic field
are (in part) converted to axions; the axions can pass through an opaque wall
and convert (in part) back to photons in a second region of strong magnetic
field. The photon regeneration is enhanced by employing matched Fabry-Perot
optical cavities, with one cavity within the axion generation magnet and the
second within the photon regeneration magnet. Compared to simple single-pass
photon regeneration, this technique would result in a gain of (F/pi)^2, where F
is the finesse of each cavity. This gain could feasibly be as high as 10^(10),
corresponding to an improvement in the sensitivity to the axion-photon
coupling, g_(agg), of order (F/pi)^(1/2) ~ 300. This improvement would enable,
for the first time, a purely laboratory experiment to probe axion-photon
couplings at a level competitive with, or superior to, limits from stellar
evolution or solar axion searches. This report gives a detailed discussion of
the scheme for actively controlling the two Fabry-Perot cavities and the laser
frequencies, and describes the heterodyne signal detection system, with limits
ultimately imposed by shot noise.Comment: 10 pages, 5 figure
Adiabatic self-tuning in a silicon microdisk optical resonator
We demonstrate a method for adiabatically self-tuning a silicon microdisk resonator. This mechanism is not only able to sensitively probe the fast nonlinear cavity dynamics, but also provides various optical functionalities like pulse compression, shaping, and tunable time delay
Recommended from our members
Fully-photonic digital radio over fibre for future super-broadband access network applications
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityIn this thesis a Fully-Photonic DRoF (FP-DRoF) system is proposed for deploying of future super-broadband access networks. Digital Radio over Fibre (DRoF) is more independent of the fibre network impairments and the length of fibre than the ARoF link. In order for fully optical deployment of the signal conversion techniques in the FP-DRoF architecture, two key components an Analogue-to-Digital Converter (ADC) and a Digital-to-Analogue Converter (DAC)) for data conversion are designed and their performance are investigated whereas the physical functionality is evaluated. The system simulation results of the proposed pipelined Photonic ADC (PADC) show that the PADC has 10 GHz bandwidth around 60 GHz of sampling rate. Furthermore, by
changing the bandwidth of the optical bandpass filter, switching to another band of sampling frequency provides optimised performance condition of the PADC. The PADC has low changes on the Effective Number of Bit (ENOB) response versus analogue RF input from 1 GHz up to 22 GHz for 60 GHz sampling frequency. The proposed 8-Bit pipelined PADC performance in terms of ENOB is evaluated at 60 Gigasample/s which is about 4.1. Recently, different methods have been reported by researchers to implement Photonic DACs
(PDACs), but their aim was to convert digital electrical signals to the corresponding analogue signal by assisting the optical techniques. In this thesis, a Binary Weighted PDAC (BW-PDAC) is proposed. In this BW-PDAC, optical digital signals are fully optically converted to an analogue signal. The spurious free dynamic range at the output of the PDAC in a back-to-back deployment of the PADC and the PDAC was 26.6 dBc. For further improvement in the system performance, a 3R (Retiming, Reshaping and Reamplifying) regeneration system is proposed in this thesis. Simulation results show that for an ultrashort RZ pulse with a 5% duty cycle at 65 Gbit/s using the proposed 3R regeneration system on a link reduces rms timing jitter by 90% while the regenerated pulse eye opening height is improved by 65%. Finally, in this thesis the proposed FP-DRoF functionality is evaluated whereas its performance is investigated through a dedicated and shared fibre links. The simulation results show (in the case of low level signal to noise ratio, in comparison with ARoF through
a dedicated fibre link) that the FP-DRoF has better BER performance than the ARoF in the order of 10-20. Furthermore, in order to realize a BER about 10-25 for the ARoF, the power penalty is about 4 dBm higher than the FP-DRoF link. The simulation results demonstrate that by considering 0.2 dB/km attenuation of a standard single mode fibre, the dedicated fibre length for the FP-DRoF link can be increased to about 20 km more than the ARoF link. Moreover, for performance assessment of the proposed FP-DRoF in a shared fibre link, the BER of the FP-DRoF link is about 10-10 magnitude less than the ARoF link for -19 dBm launched power into the fibre and the power penalty of the ARoF system is 10 dBm more than the FP-DRoF link. It is significant to increase the fibre link’s length of the FP-DRoF access network using common infrastructure. In addition, the simulation results are demonstrated that the FP-DRoF with non-uniform Wavelength Division Multiplexing (WDM) is more robust against four wave mixing impairment than the conventional WDM technique with uniform wavelength allocation and has better performance in terms of BER. It is clearly verified that the lunched power penalty at CS for DRoF link with uniform WDM techniques is about 2 dB higher than non-uniform WDM technique. Furthermore, uniform WDM method requires more bandwidth than non-uniform scheme which depends on the total number of channels and channels spacing
III-V-on-silicon photonic devices for optical communication and sensing
In the paper, we review our work on heterogeneous III-V-on-silicon photonic components and circuits for applications in optical communication and sensing. We elaborate on the integration strategy and describe a broad range of devices realized on this platform covering a wavelength range from 850 nm to 3.85 μm
Microwave and RF Applications for Micro-resonator based Frequency Combs
Photonic integrated circuits that exploit nonlinear optics in order to
generate and process signals all-optically have achieved performance far
superior to that possible electronically - particularly with respect to speed.
We review the recent achievements based in new CMOS-compatible platforms that
are better suited than SOI for nonlinear optics, focusing on radio frequency
(RF) and microwave based applications that exploit micro-resonator based
frequency combs. We highlight their potential as well as the challenges to
achieving practical solutions for many key applications. These material systems
have opened up many new capabilities such as on-chip optical frequency comb
generation and ultrafast optical pulse generation and measurement. We review
recent work on a photonic RF Hilbert transformer for broadband microwave
in-phase and quadrature-phase generation based on an integrated frequency
optical comb. The comb is generated using a nonlinear microring resonator based
on a CMOS compatible, high-index contrast, doped-silica glass platform. The
high quality and large frequency spacing of the comb enables filters with up to
20 taps, allowing us to demonstrate a quadrature filter with more than a
5-octave (3 dB) bandwidth and an almost uniform phase response.Comment: 10 pages, 6 figures, 68 references. arXiv admin note: substantial
text overlap with arXiv:1512.0174
- …