2,265 research outputs found
Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks
This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for
Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN
applications having different types of data traffic with several priorities.
The protocol achieves to increase Packet Reception Ratio (PRR) and reduce
end-to-end delay while considering multi-queue priority policy, two-hop
neighborhood information, link reliability and power efficiency. The protocol
is modular and utilizes effective methods for estimating the link metrics.
Numerical results show that the proposed protocol is a feasible solution to
addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page
Energy Efficient Clustering and Routing in Mobile Wireless Sensor Network
A critical need in Mobile Wireless Sensor Network (MWSN) is to achieve energy
efficiency during routing as the sensor nodes have scarce energy resource. The
nodes' mobility in MWSN poses a challenge to design an energy efficient routing
protocol. Clustering helps to achieve energy efficiency by reducing the
organization complexity overhead of the network which is proportional to the
number of nodes in the network. This paper proposes a novel hybrid multipath
routing algorithm with an efficient clustering technique. A node is selected as
cluster head if it has high surplus energy, better transmission range and least
mobility. The Energy Aware (EA) selection mechanism and the Maximal Nodal
Surplus Energy estimation technique incorporated in this algorithm improves the
energy performance during routing. Simulation results can show that the
proposed clustering and routing algorithm can scale well in dynamic and energy
deficient mobile sensor network.Comment: 9 pages, 4 figure
Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications
Wireless sensor networks monitor dynamic environments that change rapidly
over time. This dynamic behavior is either caused by external factors or
initiated by the system designers themselves. To adapt to such conditions,
sensor networks often adopt machine learning techniques to eliminate the need
for unnecessary redesign. Machine learning also inspires many practical
solutions that maximize resource utilization and prolong the lifespan of the
network. In this paper, we present an extensive literature review over the
period 2002-2013 of machine learning methods that were used to address common
issues in wireless sensor networks (WSNs). The advantages and disadvantages of
each proposed algorithm are evaluated against the corresponding problem. We
also provide a comparative guide to aid WSN designers in developing suitable
machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial
Performance optimization of wireless sensor networks for remote monitoring
Wireless sensor networks (WSNs) have gained worldwide attention in recent years because of their great potential for a variety of applications such as hazardous environment exploration, military surveillance, habitat monitoring, seismic sensing, and so on. In this thesis we study the use of WSNs for remote monitoring, where a wireless sensor network is deployed in a remote region for sensing phenomena of interest while its data monitoring center is located in a metropolitan area that is geographically distant from the monitored region. This application scenario poses great challenges since such kind of monitoring is typically large scale and expected to be operational for a prolonged period without human involvement. Also, the long distance between the monitored region and the data monitoring center requires that the sensed data must be transferred by the employment of a third-party communication service, which incurs service costs. Existing methodologies for performance optimization of WSNs base on that both the sensor network and its data monitoring center are co-located, and therefore are no longer applicable to the remote monitoring scenario. Thus, developing new techniques and approaches for severely resource-constrained WSNs is desperately needed to maintain sustainable, unattended remote monitoring with low cost. Specifically, this thesis addresses the key issues and tackles problems in the deployment of WSNs for remote monitoring from the following aspects. To maximize the lifetime of large-scale monitoring, we deal with the energy consumption imbalance issue by exploring multiple sinks. We develop scalable algorithms which determine the optimal number of sinks needed and their locations, thereby dynamically identifying the energy bottlenecks and balancing the data relay workload throughout the network. We conduct experiments and the experimental results demonstrate that the proposed algorithms significantly prolong the network lifetime. To eliminate imbalance of energy consumption among sensor nodes, a complementary strategy is to introduce a mobile sink for data gathering. However, the limited communication time between the mobile sink and nodes results in that only part of sensed data will be collected and the rest will be lost, for which we propose the concept of monitoring quality with the exploration of sensed data correlation among nodes. We devise a heuristic for monitoring quality maximization, which schedules the sink to collect data from selected nodes, and uses the collected data to recover the missing ones. We study the performance of the proposed heuristic and validate its effectiveness in improving the monitoring quality. To strive for the fine trade-off between two performance metrics: throughput and cost, we investigate novel problems of minimizing cost with guaranteed throughput, and maximizing throughput with minimal cost. We develop approximation algorithms which find reliable data routing in the WSN and strategically balance workload on the sinks. We prove that the delivered solutions are fractional of the optimum. We finally conclude our work and discuss potential research topics which derive from the studies of this thesis
Real-Time QoS Routing Protocols in Wireless Multimedia Sensor Networks: Study and Analysis
Many routing protocols have been proposed for wireless sensor networks. These routing protocols are almost always based on energy efficiency. However, recent advances in complementary metal-oxide semiconductor (CMOS) cameras and small microphones have led to the development of Wireless Multimedia Sensor Networks (WMSN) as a class of wireless sensor networks which pose additional challenges. The transmission of imaging and video data needs routing protocols with both energy efficiency and Quality of Service (QoS) characteristics in order to guarantee the efficient use of the sensor nodes and effective access to the collected data. Also, with integration of real time applications in Wireless Senor Networks (WSNs), the use of QoS routing protocols is not only becoming a significant topic, but is also gaining the attention of researchers. In designing an efficient QoS routing protocol, the reliability and guarantee of end-to-end delay are critical events while conserving energy. Thus, considerable research has been focused on designing energy efficient and robust QoS routing protocols. In this paper, we present a state of the art research work based on real-time QoS routing protocols for WMSNs that have already been proposed. This paper categorizes the real-time QoS routing protocols into probabilistic and deterministic protocols. In addition, both categories are classified into soft and hard real time protocols by highlighting the QoS issues including the limitations and features of each protocol. Furthermore, we have compared the performance of mobility-aware query based real-time QoS routing protocols from each category using Network Simulator-2 (NS2). This paper also focuses on the design challenges and future research directions as well as highlights the characteristics of each QoS routing protocol.https://doi.org/10.3390/s15092220
Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey
Wireless sensor networks (WSNs) consist of autonomous and resource-limited
devices. The devices cooperate to monitor one or more physical phenomena within
an area of interest. WSNs operate as stochastic systems because of randomness
in the monitored environments. For long service time and low maintenance cost,
WSNs require adaptive and robust methods to address data exchange, topology
formulation, resource and power optimization, sensing coverage and object
detection, and security challenges. In these problems, sensor nodes are to make
optimized decisions from a set of accessible strategies to achieve design
goals. This survey reviews numerous applications of the Markov decision process
(MDP) framework, a powerful decision-making tool to develop adaptive algorithms
and protocols for WSNs. Furthermore, various solution methods are discussed and
compared to serve as a guide for using MDPs in WSNs
Amorphous Placement and Retrieval of Sensory Data in Sparse Mobile Ad-Hoc Networks
Abstract—Personal communication devices are increasingly being equipped with sensors that are able to passively collect information from their surroundings – information that could be stored in fairly small local caches. We envision a system in which users of such devices use their collective sensing, storage, and communication resources to query the state of (possibly remote) neighborhoods. The goal of such a system is to achieve the highest query success ratio using the least communication overhead (power). We show that the use of Data Centric Storage (DCS), or directed placement, is a viable approach for achieving this goal, but only when the underlying network is well connected. Alternatively, we propose, amorphous placement, in which sensory samples are cached locally and informed exchanges of cached samples is used to diffuse the sensory data throughout the whole network. In handling queries, the local cache is searched first for potential answers. If unsuccessful, the query is forwarded to one or more direct neighbors for answers. This technique leverages node mobility and caching capabilities to avoid the multi-hop communication overhead of directed placement. Using a simplified mobility model, we provide analytical lower and upper bounds on the ability of amorphous placement to achieve uniform field coverage in one and two dimensions. We show that combining informed shuffling of cached samples upon an encounter between two nodes, with the querying of direct neighbors could lead to significant performance improvements. For instance, under realistic mobility models, our simulation experiments show that amorphous placement achieves 10% to 40% better query answering ratio at a 25% to 35% savings in consumed power over directed placement.National Science Foundation (CNS Cybertrust 0524477, CNS NeTS 0520166, CNS ITR 0205294, EIA RI 0202067
- …