1,528 research outputs found
Green Cellular Networks: A Survey, Some Research Issues and Challenges
Energy efficiency in cellular networks is a growing concern for cellular
operators to not only maintain profitability, but also to reduce the overall
environment effects. This emerging trend of achieving energy efficiency in
cellular networks is motivating the standardization authorities and network
operators to continuously explore future technologies in order to bring
improvements in the entire network infrastructure. In this article, we present
a brief survey of methods to improve the power efficiency of cellular networks,
explore some research issues and challenges and suggest some techniques to
enable an energy efficient or "green" cellular network. Since base stations
consume a maximum portion of the total energy used in a cellular system, we
will first provide a comprehensive survey on techniques to obtain energy
savings in base stations. Next, we discuss how heterogeneous network deployment
based on micro, pico and femto-cells can be used to achieve this goal. Since
cognitive radio and cooperative relaying are undisputed future technologies in
this regard, we propose a research vision to make these technologies more
energy efficient. Lastly, we explore some broader perspectives in realizing a
"green" cellular network technologyComment: 16 pages, 5 figures, 2 table
Low-latency Networking: Where Latency Lurks and How to Tame It
While the current generation of mobile and fixed communication networks has
been standardized for mobile broadband services, the next generation is driven
by the vision of the Internet of Things and mission critical communication
services requiring latency in the order of milliseconds or sub-milliseconds.
However, these new stringent requirements have a large technical impact on the
design of all layers of the communication protocol stack. The cross layer
interactions are complex due to the multiple design principles and technologies
that contribute to the layers' design and fundamental performance limitations.
We will be able to develop low-latency networks only if we address the problem
of these complex interactions from the new point of view of sub-milliseconds
latency. In this article, we propose a holistic analysis and classification of
the main design principles and enabling technologies that will make it possible
to deploy low-latency wireless communication networks. We argue that these
design principles and enabling technologies must be carefully orchestrated to
meet the stringent requirements and to manage the inherent trade-offs between
low latency and traditional performance metrics. We also review currently
ongoing standardization activities in prominent standards associations, and
discuss open problems for future research
Internet of Things for Sustainability: Perspectives in Privacy, Cybersecurity, and Future Trends
In the sustainability IoT, the cybersecurity risks to things, sensors, and monitoring systems are distinct from the conventional networking systems in many aspects. The interaction of sustainability IoT with the physical world phenomena (e.g., weather, climate, water, and oceans) is mostly not found in the modern information technology systems. Accordingly, actuation, the ability of these devices to make changes in real world based on sensing and monitoring, requires special consideration in terms of privacy and security. Moreover, the energy efficiency, safety, power, performance requirements of these device distinguish them from conventional computers systems. In this chapter, the cybersecurity approaches towards sustainability IoT are discussed in detail. The sustainability IoT risk categorization, risk mitigation goals, and implementation aspects are analyzed. The openness paradox and data dichotomy between privacy and sharing is analyzed. Accordingly, the IoT technology and security standard developments activities are highlighted. The perspectives on opportunities and challenges in IoT for sustainability are given. Finally, the chapter concludes with a discussion of sustainability IoT cybersecurity case studies
Routing and Broadcast Development for Minimizing Transmission Interruption in Multi rate Wireless Mesh Networks using Directional Antennas
Using directional antennas to reduce interference and improve throughput in multi hop wireless networks has attracted much attention from the research community in recent years. In this paper, we consider the issue of minimum delay broadcast in multi rate wireless mesh networks using directional antennas. We are given a set of mesh routers equipped with directional antennas, one of which is the gateway node and the source of the broadcast. Our objective is to minimize the total transmission delay for all the other nodes to receive a broadcast packet from the source, by determining the set of relay nodes and computing the number and orientations of beams formed by each relay node. We propose a heuristic solution with two steps. Firstly, we construct a broadcast routing tree by defining a new routing metric to select the relay nodes and compute the optimal antenna beams for each relay node. Then, we use a greedy method to make scheduling of concurrent transmissions without causing beam interference. Extensive simulations have demonstrated that our proposed method can reduce the broadcast delay significantly compared with the methods using omnidirectional antennas and single-rate transmission. In addition, the results also show that our method performs better than the method with fixed antenna beams. Keywords: Multihop, Wireless, Mesh, Omnidirectional
A Comprehensive Survey of the Tactile Internet: State of the art and Research Directions
The Internet has made several giant leaps over the years, from a fixed to a
mobile Internet, then to the Internet of Things, and now to a Tactile Internet.
The Tactile Internet goes far beyond data, audio and video delivery over fixed
and mobile networks, and even beyond allowing communication and collaboration
among things. It is expected to enable haptic communication and allow skill set
delivery over networks. Some examples of potential applications are
tele-surgery, vehicle fleets, augmented reality and industrial process
automation. Several papers already cover many of the Tactile Internet-related
concepts and technologies, such as haptic codecs, applications, and supporting
technologies. However, none of them offers a comprehensive survey of the
Tactile Internet, including its architectures and algorithms. Furthermore, none
of them provides a systematic and critical review of the existing solutions. To
address these lacunae, we provide a comprehensive survey of the architectures
and algorithms proposed to date for the Tactile Internet. In addition, we
critically review them using a well-defined set of requirements and discuss
some of the lessons learned as well as the most promising research directions
Cooperative communication in wireless networks: algorithms, protocols and systems
Current wireless network solutions are based on a link abstraction where a
single co-channel transmitter transmits in any time duration. This model severely
limits the performance that can be obtained from the network. Being inherently an
extension of a wired network model, this model is also incapable of handling the
unique challenges that arise in a wireless medium. The prevailing theme of this
research is to explore wireless link abstractions that incorporate the broadcast and
space-time varying nature of the wireless channel. Recently, a new paradigm for
wireless networks which uses the idea of 'cooperative transmissions' (CT) has garnered
significant attention. Unlike current approaches where a single transmitter transmits
at a time in any channel, with CT, multiple transmitters transmit concurrently after
appropriately encoding their transmissions. While the physical layer mechanisms for
CT have been well studied, the higher layer applicability of CT has been relatively
unexplored. In this work, we show that when wireless links use CT, several network
performance metrics such as aggregate throughput, security and spatial reuse can
be improved significantly compared to the current state of the art. In this context,
our first contribution is Aegis, a framework for securing wireless networks against
eavesdropping which uses CT with intelligent scheduling and coding in Wireless Local
Area networks. The second contribution is Symbiotic Coding, an approach to encode
information such that successful reception is possible even upon collisions. The third
contribution is Proteus, a routing protocol that improves aggregate throughput in
multi-hop networks by leveraging CT to adapt the rate and range of links in a flow.
Finally, we also explore the practical aspects of realizing CT using real systems.PhDCommittee Chair: Sivakumar, Raghupathy; Committee Member: Ammar, Mostafa; Committee Member: Ingram, Mary Ann; Committee Member: Jayant, Nikil; Committee Member: Riley, Georg
- …