M2M meets D2D: Harnessing D2D Interfaces for the Aggregation of M2M Data

Direct device-to-device (D2D) communication presents as an effective technique to reduce the load at the base station (BS) while ensuring reliable localized communication. In this paper, we propose a large-scale M2M data Aggregation and Trunking (MAT) scheme, whereby the user equipments (UEs) aggregate M2M data from the nearby MTDs and trunk this data along with their own data to the BS in the cellular uplink. We develop a comprehensive stochastic geometry framework by considering a Poisson hard sphere model for UE coverage. The main motivation of this model is to capture the fact that a UE can gather data from short range, low-power MTDs located only in its close proximity while ensuring that an MTD is associated to at most one UE. We explore the inherent trade-off between the time reserved for aggregation and successful trunking of data to the BS and compare our results with the baseline case where no aggregation mechanism is used. We show that while the baseline case of connecting a bulk of MTDs directly with the BS is prohibitive, MAT scheme can efficiently gather data from selected MTDs in a distributed manner

What Can Wireless Cellular Technologies Do about the Upcoming Smart Metering Traffic?

The introduction of smart electricity meters with cellular radio interface puts an additional load on the wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates a low-rate sporadic traffic. As the number of distributed energy resources increases, the household power will become more variable and thus unpredictable from the viewpoint of the Distribution System Operator (DSO). It is therefore expected, in the near future, to have an increased number of Wide Area Measurement System (WAMS) devices with Phasor Measurement Unit (PMU)-like capabilities in the distribution grid, thus allowing the utilities to monitor the low voltage grid quality while providing information required for tighter grid control. From a communication standpoint, the traffic profile will change drastically towards higher data volumes and higher rates per device. In this paper, we characterize the current traffic generated by smart electricity meters and supplement it with the potential traffic requirements brought by introducing enhanced Smart Meters, i.e., meters with PMU-like capabilities. Our study shows how GSM/GPRS and LTE cellular system performance behaves with the current and next generation smart meters traffic, where it is clearly seen that the PMU data will seriously challenge these wireless systems. We conclude by highlighting the possible solutions for upgrading the cellular standards, in order to cope with the upcoming smart metering traffic.Comment: Submitted; change: corrected location of eSM box in Fig. 1; May 22, 2015: Major revision after review; v4: revised, accepted for publicatio

Group-Based Data Offloading Techniques Assisted by D2D Communication in 5G Mobile Network

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are offloaded to the nearby mobile edge-computing server. By adopting the sensing capability on MTC devices, we use a power exponential function to compute a correlation coefficient existing between the devices. Then we propose two grouping techniques K-Means and hierarchical clustering to combine only the MTC devices, which are spatially correlated. Based on this framework, we compare the energy consumption when all data processed locally at a smartphone or remotely at mobile edge computing server with optimal solution obtained by exhaustive search method. The results illustrated that; the proposed grouping technique reduce the energy consumption at a smartphone while satisfying a required completion time.&nbsp

Latency Minimization in Wireless IoT Using Prioritized Channel Access and Data Aggregation

Future Internet of Things (IoT) networks are expected to support a massive number of heterogeneous devices/sensors in diverse applications ranging from eHealthcare to industrial control systems. In highly-dense deployment scenarios such as industrial IoT systems, providing reliable communication links with low-latency becomes challenging due to the involved system delay including data acquisition and processing latencies at the edge-side of IoT networks. In this regard, this paper proposes a priority-based channel access and data aggregation scheme at the Cluster Head (CH) to reduce channel access and queuing delays in a clustered industrial IoT network. First, a prioritized channel access mechanism is developed by assigning different Medium Access Control (MAC) layer attributes to the packets coming from two types of IoT nodes, namely, high-priority and low-priority nodes, based on the application-specific information provided from the cloud-center. Subsequently, a preemptive M/G/1 queuing model is employed by using separate low-priority and high- priority queues before sending aggregated data to the Cloud. Our results show that the proposed priority-based method significantly improves the system latency and reliability as compared to the non-prioritized scheme

D6.6 Final report on the METIS 5G system concept and technology roadmap

This deliverable presents the METIS 5G system concept which was developed to fulfil the requirements of the beyond-2020 connected information society and to extend today’s wireless communication systems to include new usage scenarios. The METIS 5G system concept consists of three generic 5G services and four main enablers. The three generic 5G services are Extreme Mobile BroadBand (xMBB), Massive Machine- Type Communications (mMTC), and Ultra-reliable Machine-Type Communication (uMTC). The four main enablers are Lean System Control Plane (LSCP), Dynamic RAN, Localized Contents and Traffic Flows, and Spectrum Toolbox. An overview of the METIS 5G architecture is given, as well as spectrum requirements and considerations. System-level evaluation of the METIS 5G system concept has been conducted, and we conclude that the METIS technical objectives are met. A technology roadmap outlining further 5G development, including a timeline and recommended future work is given.Popovski, P.; Mange, G.; Gozalvez -Serrano, D.; Rosowski, T.; Zimmermann, G.; Agyapong, P.; Fallgren, M.... (2014). D6.6 Final report on the METIS 5G system concept and technology roadmap. http://hdl.handle.net/10251/7676

Massive Machine Type Communication with Data Aggregation and Resource Scheduling

To enable massive machine type communication (mMTC), data aggregation is a promising approach to reduce the congestion caused by a massive number of machine type devices (MTDs). In this paper, we consider a two-phase cellular-based mMTC network, where MTDs transmit to aggregators (i.e., aggregation phase) and the aggregated data is then relayed to base stations (i.e., relaying phase). Due to the limited resources, the aggregators not only aggregate data, but also schedule resources among MTDs. We consider two scheduling schemes: random resource scheduling (RRS) and channel-aware resource scheduling (CRS). By leveraging the stochastic geometry, we present a tractable analytical framework to investigate the signal-to-interference ratio (SIR) for each phase, thereby computing the MTD success probability, the average number of successful MTDs and probability of successful channel utilization, which are the key metrics characterizing the overall mMTC performance. Our numerical results show that, although the CRS outperforms the RRS in terms of SIR at the aggregation phase, the simpler RRS has almost the same performance as the CRS for most of the cases with regards to the overall mMTC performance. Furthermore, the provision of more resources at the aggregation phase is not always beneficial to the mMTC performance.This work was supported by the Australian Research Council’s Discovery Project Funding Scheme (Project number DP170100939)

Mission-Critical Communications from LMR to 5G: a Technology Assessment approach for Smart City scenarios

Radiocommunication networks are one of the main support tools of agencies that carry out actions in Public Protection & Disaster Relief (PPDR), and it is necessary to update these communications technologies from narrowband to broadband and integrated to information technologies to have an effective action before society. Understanding that this problem includes, besides the technical aspects, issues related to the social context to which these systems are inserted, this study aims to construct scenarios, using several sources of information, that helps the managers of the PPDR agencies in the technological decisionmaking process of the Digital Transformation of Mission-Critical Communication considering Smart City scenarios, guided by the methods and approaches of Technological Assessment (TA).As redes de radiocomunicações são uma das principais ferramentas de apoio dos órgãos que realizam ações de Proteção Pública e Socorro em desastres, sendo necessário atualizar essas tecnologias de comunicação de banda estreita para banda larga, e integra- las às tecnologias de informação, para se ter uma atuação efetiva perante a sociedade . Entendendo que esse problema inclui, além dos aspectos técnicos, questões relacionadas ao contexto social ao qual esses sistemas estão inseridos, este estudo tem por objetivo a construção de cenários, utilizando diversas fontes de informação que auxiliem os gestores destas agências na tomada de decisão tecnológica que envolve a transformação digital da Comunicação de Missão Crítica considerando cenários de Cidades Inteligentes, guiado pelos métodos e abordagens de Avaliação Tecnológica (TA)

Design and Performance Analysis of Next Generation Heterogeneous Cellular Networks for the Internet of Things

The Internet of Things (IoT) is a system of inter-connected computing devices, objects and mechanical and digital machines, and the communications between these devices/objects and other Internet-enabled systems. Scalable, reliable, and energy-efficient IoT connectivity will bring huge benefits to the society, especially in transportation, connected self-driving vehicles, healthcare, education, smart cities, and smart industries. The objective of this dissertation is to model and analyze the performance of large-scale heterogeneous two-tier IoT cellular networks, and offer design insights to maximize their performance. Using stochastic geometry, we develop realistic yet tractable models to study the performance of such networks. In particular, we propose solutions to the following research problems: -We propose a novel analytical model to estimate the mean uplink device data rate utility function under both spectrum allocation schemes, full spectrum reuse (FSR) and orthogonal spectrum partition (OSP), for uplink two-hop IoT networks. We develop constraint gradient ascent optimization algorithms to obtain the optimal aggregator association bias (for the FSR scheme) and the optimal joint spectrum partition ratio and optimal aggregator association bias (for the OSP scheme). -We study the performance of two-tier IoT cellular networks in which one tier operates in the traditional sub-6GHz spectrum and the other, in the millimeter wave (mm-wave) spectrum. In particular, we characterize the meta distributions of the downlink signal-to-interference ratio (sub-6GHz spectrum), the signal-to-noise ratio (mm-wave spectrum) and the data rate of a typical device in such a hybrid spectrum network. Finally, we characterize the meta distributions of the SIR/SNR and data rate of a typical device by substituting the cumulative moment of the CSP of a user device into the Gil-Pelaez inversion theorem. -We propose to split the control plane (C-plane) and user plane (U-plane) as a potential solution to harvest densification gain in heterogeneous two-tier networks while minimizing the handover rate and network control overhead. We develop a tractable mobility-aware model for a two-tier downlink cellular network with high density small cells and a C-plane/U-plane split architecture. The developed model is then used to quantify effect of mobility on the foreseen densification gain with and without C-plane/U-plane splitting