Cost Effective Routing Implementations for On-chip Networks

Arquitecturas de múltiples núcleos como multiprocesadores (CMP) y soluciones multiprocesador para sistemas dentro del chip (MPSoCs) actuales se basan en la eficacia de las redes dentro del chip (NoC) para la comunicación entre los diversos núcleos. Un diseño eficiente de red dentro del chip debe ser escalable y al mismo tiempo obtener valores ajustados de área, latencia y consumo de energía. Para diseños de red dentro del chip de propósito general se suele usar topologías de malla 2D ya que se ajustan a la distribución del chip. Sin embargo, la aparición de nuevos retos debe ser abordada por los diseñadores. Una mayor probabilidad de defectos de fabricación, la necesidad de un uso optimizado de los recursos para aumentar el paralelismo a nivel de aplicación o la necesidad de técnicas eficaces de ahorro de energía, puede ocasionar patrones de irregularidad en las topologías. Además, el soporte para comunicación colectiva es una característica buscada para abordar con eficacia las necesidades de comunicación de los protocolos de coherencia de caché. En estas condiciones, un encaminamiento eficiente de los mensajes se convierte en un reto a superar. El objetivo de esta tesis es establecer las bases de una nueva arquitectura para encaminamiento distribuido basado en lógica que es capaz de adaptarse a cualquier topología irregular derivada de una estructura de malla 2D, proporcionando así una cobertura total para cualquier caso resultado de soportar los retos mencionados anteriormente. Para conseguirlo, en primer lugar, se parte desde una base, para luego analizar una evolución de varios mecanismos, y finalmente llegar a una implementación, que abarca varios módulos para alcanzar el objetivo mencionado anteriormente. De hecho, esta última implementación tiene por nombre eLBDR (effective Logic-Based Distributed Routing). Este trabajo cubre desde el primer mecanismo, LBDR, hasta el resto de mecanismos que han surgido progresivamente.Rodrigo Mocholí, S. (2010). Cost Effective Routing Implementations for On-chip Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8962Palanci

Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters

Actualmente, los clusters de PC son un alternativa rentable a los computadores paralelos. En estos sistemas, miles de componentes (procesadores y/o discos duros) se conectan a través de redes de interconexión de altas prestaciones. Entre las tecnologías de red actualmente disponibles para construir clusters, InfiniBand (IBA) ha emergido como un nuevo estándar de interconexión para clusters. De hecho, ha sido adoptado por muchos de los sistemas más potentes construidos actualmente (lista top500). A medida que el número de nodos aumenta en estos sistemas, la red de interconexión también crece. Junto con el aumento del número de componentes la probabilidad de averías aumenta dramáticamente, y así, la tolerancia a fallos en el sistema en general, y de la red de interconexión en particular, se convierte en una necesidad. Desafortunadamente, la mayor parte de las estrategias de encaminamiento tolerantes a fallos propuestas para los computadores masivamente paralelos no pueden ser aplicadas porque el encaminamiento y las transiciones de canal virtual son deterministas en IBA, lo que impide que los paquetes eviten los fallos. Por lo tanto, son necesarias nuevas estrategias para tolerar fallos. Por ello, esta tesis se centra en proporcionar los niveles adecuados de tolerancia a fallos a los clusters de PC, y en particular a las redes IBA. En esta tesis proponemos y evaluamos varios mecanismos adecuados para las redes de interconexión para clusters. El primer mecanismo para proporcionar tolerancia a fallos en IBA (al que nos referimos como encaminamiento tolerante a fallos basado en transiciones; TFTR) consiste en usar varias rutas disjuntas entre cada par de nodos origen-destino y seleccionar la ruta apropiada en el nodo fuente usando el mecanismo APM proporcionado por IBA. Consiste en migrar las rutas afectadas por el fallo a las rutas alternativas sin fallos. Sin embargo, con este fin, es necesario un algoritmo eficiente de encaminamiento capaz de proporcionar suficientesMontañana Aliaga, JM. (2008). Efficient mechanisms to provide fault tolerance in interconnection networks for pc clusters [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/2603Palanci

Topology Agnostic Methods for Routing, Reconfiguration and Virtualization of Interconnection Networks

Modern computing systems, such as supercomputers, data centers and multicore chips, generally require efficient communication between their different system units; tolerance towards component faults; flexibility to expand or merge; and a high utilization of their resources. Interconnection networks are used in a variety of such computing systems in order to enable communication between their diverse system units. Investigation and proposal of new or improved solutions to topology agnostic routing and reconfiguration of interconnection networks are main objectives of this thesis. In addition, topology agnostic routing and reconfiguration algorithms are utilized in the development of new and flexible approaches to processor allocation. The thesis aims to present versatile solutions that can be used for the interconnection networks of a number of different computing systems. No particular routing algorithm was specified for an interconnection network technology which is now incorporated in Dolphin Express. The thesis states a set of criteria for a suitable routing algorithm, evaluates a number of existing routing algorithms, and recommend that one of the algorithms – which fulfils all of the criteria – is used. Further investigations demonstrate how this routing algorithm inherently supports fault-tolerance, and how it can be optimized for some network topologies. These considerations are also relevant for the InfiniBand interconnection network technology. Reconfiguration of interconnection networks (change of routing function) is a deadlock prone process. Some existing reconfiguration strategies include deadlock avoidance mechanisms that significantly reduce the network service offered to running applications. The thesis expands the area of application for one of the most versatile and efficient reconfiguration algorithms available in the literature, and proposes an optimization of this algorithm that improves the network service offered to running applications. Moreover, a new reconfiguration algorithm is presented that supports a replacement of the routing function without causing performance penalties. Processor allocation strategies that guarantee traffic-containment commonly pose strict requirements on the shape of partitions, and thus achieve only a limited utilization of a system’s computing resources. The thesis introduces two new approaches that are more flexible. Both approaches utilize the properties of a topology agnostic routing algorithm in order to enforce traffic-containment within arbitrarily shaped partitions. Consequently, a high resource utilization as well as isolation of traffic between different partitions is achieved

Loss-free architectures in optical burst switched networks for a reliable and dynamic optical layer

For the last three decades, the optical fiber has been a quite systematic response to dimensioning issues in the Internet. Originally restricted to long haul networks, the optical network has gradually descended the network hierarchy to discard the bottlenecks. In the 90's, metropolitan networks became optical. Today, optical fibers are deployed in access networks and reach the users. In a near future, besides wireless access and local area networks, all networks in the network hierarchy may be made of fibers, in order to support current services (HDTV) and the emergence of new applications (3D-TV newly commercialized in USA). The deployment of such greedy applications will initiate an upward upgrade. The first step may be the Metropolitan Area Networks (MANs), not only because of the traffic growth, but also because of the variety of served applications, each with a specific traffic profile. The current optical layer is of mitigated efficiency, dealing with unforeseen events. The lack of reactivity is mainly due to the slow switching devices: any on-line decision of the optical layer is delayed by the configuration of the. devices. When the optical network has been extended in the MANs, a lot of efforts has been deployed to improve the reactivity of the optical layer. The Optical Circuit Switching paradigm (OCS) has been improved but it ultimately relies on off-line configuration of the optical devices. Optical Burst Switching (OBS) can be viewed as a highly flexible evolution of OCS, that operates five order of magnitude faster. Within this 'architecture, the loss-free guaranty can be abandoned in order to improve the reactivity of the optical layer. Indeed, reliability and reactivity appear as antagonists properties and getting closer to either of them mitigates the other. This thesis aims at proposing a solution to achieve reliable transmission over a dynamic optical layer. Focusing on OBS networks, our objective is to solve the contention issue without mitigating the reactivity. After the consideration of contention avoidance mechanisms with routing constraints similar as in OCS networks, we investigate the reactive solutions that intend to solve the contentions. None of the available contention resolution scheme can ensure the 100% efficiency that leads to loss-free transmission. An attractive solution is the recourse to electrical buffering, but it is notoriously disregarded because (1) it may highly impact the delays and (2) loss can occur due to buffer overflows. The efficiency of translucent architectures thus highly depends on the buffer availability, that can be improved by reducing the time spent in the buffers and the contention rate. We show that traffic grooming can highly reduce the emission delay, and consequently the buffer occupancy. In a first architecture, traffic grooming is enabled by a translucent core node architecture, capable to re-aggregate incoming bursts. The re-aggregation is mandatory to "de-groom" the bursts in the core network (i.e., to demultiplex the content of a burst). On the one hand, the re-aggregation highly reduces the loss probability, but on the other hand, it absorbs the benefits of traffic grooming. Finally, dynamic access to re-aggregation for contention resolution, despite the significant reduction of the contention rate, dramatically impacts the end-to-end delay and the memory requirement. We thus propose a second architecture, called CAROBS, that exploits traffic grooming in the optical domain. This framework is fully dynamic and can be used jointly with our translucent architecture that performs re-aggregation. As the (de)grooming operations do not involve re-aggregation, the translucent module can be restricted to contention resolution. As a result, the volume of data submitted to re-aggregation is drastically reduced and loss-free transmission can be reached with the same reactivity, end-to-end delay and memory requirement as a native OBS networ

Development and Evaluation of Sensor Concepts for Ageless Aerospace Vehicles: Report 3 - Design of the Concept Demonstrator

This report provides an outline of the essential features of a Structural Health Monitoring Concept Demonstrator (CD) that will be constructed during the next eight months. It is emphasized that the design cannot be considered to be complete, and that design work will continue in parallel with construction and testing. A major advantage of the modular design is that small modules of the system can be developed, tested and modified before a commitment is made to full system development. The CD is expected to develop and evolve for a number of years after its initial construction. This first stage will, of necessity, be relatively simple and have limited capabilities. Later developments will improve all aspects of the functionality of the system, including sensing, processing, communications, intelligence and response. The report indicates the directions this later development will take

Application of ant based routing and intelligent control to telecommunications network management

This thesis investigates the use of novel Artificial Intelligence techniques to improve the control of telecommunications networks. The approaches include the use of Ant-Based Routing and software Agents to encapsulate learning mechanisms to improve the performance of the Ant-System and a highly modular approach to network-node configuration and management into which this routing system can be incorporated. The management system uses intelligent Agents distributed across the nodes of the network to automate the process of network configuration. This is important in the context of increasingly complex network management, which will be accentuated with the introduction of IPv6 and QoS-aware hardware. The proposed novel solution allows an Agent, with a Neural Network based Q-Learning capability, to adapt the response speed of the Ant-System - increasing it to counteract congestion, but reducing it to improve stability otherwise. It has the ability to adapt its strategy and learn new ones for different network topologies. The solution has been shown to improve the performance of the Ant-System, as well as outperform a simple non-learning strategy which was not able to adapt to different networks. This approach has a wide region of applicability to such areas as road-traffic management, and more generally, positioning of learning techniques into complex domains. Both Agent architectures are Subsumption style, blending short-term responses with longer term goal-driven behaviour. It is predicted that this will be an important approach for the application of AI, as it allows modular design of systems in a similar fashion to the frameworks developed for interoperability of telecommunications systems

A framework for traffic flow survivability in wireless networks prone to multiple failures and attacks

Transmitting packets over a wireless network has always been challenging due to failures that have always occurred as a result of many types of wireless connectivity issues. These failures have caused significant outages, and the delayed discovery and diagnostic testing of these failures have exacerbated their impact on servicing, economic damage, and social elements such as technological trust. There has been research on wireless network failures, but little on multiple failures such as node-node, node-link, and link–link failures. The problem of capacity efficiency and fast recovery from multiple failures has also not received attention. This research develops a capacity efficient evolutionary swarm survivability framework, which encompasses enhanced genetic algorithm (EGA) and ant colony system (ACS) survivability models to swiftly resolve node-node, node-link, and link-link failures for improved service quality. The capacity efficient models were tested on such failures at different locations on both small and large wireless networks. The proposed models were able to generate optimal alternative paths, the bandwidth required for fast rerouting, minimized transmission delay, and ensured the rerouting path fitness and good transmission time for rerouting voice, video and multimedia messages. Increasing multiple link failures reveal that as failure increases, the bandwidth used for rerouting and transmission time also increases. This implies that, failure increases bandwidth usage which leads to transmission delay, which in turn slows down message rerouting. The suggested framework performs better than the popular Dijkstra algorithm, proactive, adaptive and reactive models, in terms of throughput, packet delivery ratio (PDR), speed of transmission, transmission delay and running time. According to the simulation results, the capacity efficient ACS has a PDR of 0.89, the Dijkstra model has a PDR of 0.86, the reactive model has a PDR of 0.83, the proactive model has a PDR of 0.83, and the adaptive model has a PDR of 0.81. Another performance evaluation was performed to compare the proposed model's running time to that of other evaluated routing models. The capacity efficient ACS model has a running time of 169.89ms on average, while the adaptive model has a running time of 1837ms and Dijkstra has a running time of 280.62ms. With these results, capacity efficient ACS outperforms other evaluated routing algorithms in terms of PDR and running time. According to the mean throughput determined to evaluate the performance of the following routing algorithms: capacity efficient EGA has a mean throughput of 621.6, Dijkstra has a mean throughput of 619.3, proactive (DSDV) has a mean throughput of 555.9, and reactive (AODV) has a mean throughput of 501.0. Since Dijkstra is more similar to proposed models in terms of performance, capacity efficient EGA was compared to Dijkstra as follows: Dijkstra has a running time of 3.8908ms and EGA has a running time of 3.6968ms. In terms of running time and mean throughput, the capacity efficient EGA also outperforms the other evaluated routing algorithms. The generated alternative paths from these investigations demonstrate that the proposed framework works well in preventing the problem of data loss in transit and ameliorating congestion issue resulting from multiple failures and server overload which manifests when the process hangs. The optimal solution paths will in turn improve business activities through quality data communications for wireless service providers.School of ComputingPh. D. (Computer Science

Modeling and simulation of routing protocol for ad hoc networks combining queuing network analysis and ANT colony algorithms

The field of Mobile Ad hoc Networks (MANETs) has gained an important part of the interest of researchers and become very popular in last few years. MANETs can operate without fixed infrastructure and can survive rapid changes in the network topology. They can be studied formally as graphs in which the set of edges varies in time. The main method for evaluating the performance of MANETs is simulation. Our thesis presents a new adaptive and dynamic routing algorithm for MANETs inspired by the Ant Colony Optimization (ACO) algorithms in combination with network delay analysis. Ant colony optimization algorithms have all been inspired by a specific foraging behavior of ant colonies which are able to find, if not the shortest, at least a very good path connecting the colony’s nest with a source of food. Our evaluation of MANETs is based on the evaluation of the mean End-to-End delay to send a packet from source to destination node through a MANET. We evaluated the mean End-to-End delay as one of the most important performance evaluation metrics in computer networks. Finally, we evaluate our proposed ant algorithm by a comparative study with respect to one of the famous On-Demand (reactive) routing protocols called Ad hoc On-Demand Distance Vector (AODV) protocol. The evaluation shows that, the ant algorithm provides a better performance by reducing the mean End-to-End delay than the AODV algorithm. We investigated various simulation scenarios with different node density and pause times. Our new algorithm gives good results under certain conditions such as, increasing the pause time and decreasing node density. The scenarios that are applied for evaluating our routing algorithm have the following assumptions: 2-D rectangular area, no obstacles, bi-directional links, fixed number of nodes operate for the whole simulation time and nodes movements are performed according to the Random Waypoint Mobility (RWM) or the Boundless Simulation Area Mobility (BSAM) model. KEYWORDS: Ant Colony Optimization (ACO), Mobile Ad hoc Network (MANET), Queuing Network Analysis, Routing Algorithms, Mobility Models, Hybrid Simulation