Frequency invariant MVDR beamforming without filters and implementation using MIMO radar

Frequency invariant beamforming with sensor arrays is generally achieved using filters in the form of tapped delay-lines following each sensor. However it has been recently shown that with the help of the rectangular smart antenna array, it is possible to generate frequency invariant beampattern without using filters. In this paper, this frequency invariant beamforming technique is utilized to perform MVDR beamforming in the beamspace by designing frequency invariant beams spanning the desired range of azimuthal angles and optimally combining them. However, the performance of the frequency invariant beamformer depends on the number of sensors which could be large for a rectangular array of size M × N. Making use of the virtual array concept used in MIMO radar, a novel method of producing the same frequency invariant beam, using only M transmitting and N receiving antennas, is proposed and a design example is provided to demonstrate the idea

Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems

The millimeter wave (mmWave) frequencies are likely to play a significant role in fifth-generation (5G) cellular systems. A key challenge in developing systems in these bands is the potential for rapid channel dynamics: since mmWave signals are blocked by many materials, small changes in the position or orientation of the handset relative to objects in the environment can cause large swings in the channel quality. This paper addresses the issue of tracking the signal to noise ratio (SNR), which is an essential procedure for rate prediction, handover and radio link failure detection. A simple method for estimating the SNR from periodic synchronization signals is considered. The method is then evaluated using real experiments in common blockage scenarios combined with outdoor statistical models

Adaptive beamforming using frequency invariant uniform concentric circular arrays

This paper proposes new adaptive beamforming algorithms for a class of uniform concentric circular arrays (UCCAs) having near-frequency invariant characteristics. The basic principle of the UCCA frequency invariant beamformer (FIB) is to transform the received signals to the phase mode representation and remove the frequency dependence of individual phase modes through the use of a digital beamforming or compensation network. As a result, the far field pattern of the array is electronic steerable and is approximately invariant over a wider range of frequencies than the uniform circular arrays (UCAs). The beampattern is governed by a small set of variable beamformer weights. Based on the minimum variance distortionless response (MVDR) and generalized sidelobe canceller (GSC) methods, new recursive adaptive beamforming algorithms for UCCA-FIB are proposed. In addition, robust versions of these adaptive beamforming algorithms for mitigating direction-of-arrival (DOA) and sensor position errors are developed. Simulation results show that the proposed adaptive UCCA-FIBs converge much faster and reach a considerable lower steady-state error than conventional broadband UCCA beamformers without using the compensation network. Since fewer variable multipliers are required in the proposed algorithms, it also leads to lower arithmetic complexity and faster tracking performance than conventional methods. © 2007 IEEE.published_or_final_versio

Efficient frequency invariant beamforming using virtual arrays

In wideband array processing, frequency invariant beamforming provides a popular means to make the beampattern allpass with respect to frequency. Traditionally, such beampatterns are realized as a two dimensional filter, using tapped delay-line (TDL) filters following each spatial sensor. However it has been recently shown that with the help of a rectangular antenna array, it is possible to generate fixed frequency invariant beampatterns without using filters. In this paper, this concept is generalized to the case of two dimensional arrays with elements on a (possibly nonseparable) lattice. Since performance of the frequency invariant beamformer depends on the number of sensors which could be large for a 2D array of size M × N, a novel approach to beamforming based on the difference co-array of a physical array is also proposed, which avoids use of additional physical sensors. The realization of the frequency invariant beams using second order statistics of the impinging signal with only M + N physical sensors, instead of the two dimensional array of size M×N, is demonstrated. The usefulness of the proposed method is verified through computer simulation

Signal Subspace Processing in the Beam Space of a True Time Delay Beamformer Bank

A number of techniques for Radio Frequency (RF) source location for wide bandwidth signals have been described that utilize coherent signal subspace processing, but often suffer from limitations such as the requirement for preliminary source location estimation, the need to apply the technique iteratively, computational expense or others. This dissertation examines a method that performs subspace processing of the data from a bank of true time delay beamformers. The spatial diversity of the beamformer bank alleviates the need for a preliminary estimate while simultaneously reducing the dimensionality of subsequent signal subspace processing resulting in computational efficiency. The pointing direction of the true time delay beams is independent of frequency, which results in a mapping from element space to beam space that is wide bandwidth in nature. This dissertation reviews previous methods, introduces the present method, presents simulation results that demonstrate the assertions, discusses an analysis of performance in relation to the Cramer-Rao Lower Bound (CRLB) with various levels of noise in the system, and discusses computational efficiency. One limitation of the method is that in practice it may be appropriate for systems that can tolerate a limited field of view. The application of Electronic Intelligence is one such application. This application is discussed as one that is appropriate for a method exhibiting high resolution of very wide bandwidth closely spaced sources and often does not require a wide field of view. In relation to system applications, this dissertation also discusses practical employment of the novel method in terms of antenna elements, arrays, platforms, engagement geometries, and other parameters. The true time delay beam space method is shown through modeling and simulation to be capable of resolving closely spaced very wideband sources over a relevant field of view in a single algorithmic pass, requiring no course preliminary estimation, and exhibiting low computational expense superior to many previous wideband coherent integration techniques