Congestion Control for Network-Aware Telehaptic Communication

Telehaptic applications involve delay-sensitive multimedia communication between remote locations with distinct Quality of Service (QoS) requirements for different media components. These QoS constraints pose a variety of challenges, especially when the communication occurs over a shared network, with unknown and time-varying cross-traffic. In this work, we propose a transport layer congestion control protocol for telehaptic applications operating over shared networks, termed as dynamic packetization module (DPM). DPM is a lossless, network-aware protocol which tunes the telehaptic packetization rate based on the level of congestion in the network. To monitor the network congestion, we devise a novel network feedback module, which communicates the end-to-end delays encountered by the telehaptic packets to the respective transmitters with negligible overhead. Via extensive simulations, we show that DPM meets the QoS requirements of telehaptic applications over a wide range of network cross-traffic conditions. We also report qualitative results of a real-time telepottery experiment with several human subjects, which reveal that DPM preserves the quality of telehaptic activity even under heavily congested network scenarios. Finally, we compare the performance of DPM with several previously proposed telehaptic communication protocols and demonstrate that DPM outperforms these protocols.Comment: 25 pages, 19 figure

On the merits of SVC-based HTTP adaptive streaming

HTTP Adaptive Streaming (HAS) is quickly becoming the dominant type of video streaming in Over-The-Top multimedia services. HAS content is temporally segmented and each segment is offered in different video qualities to the client. It enables a video client to dynamically adapt the consumed video quality to match with the capabilities of the network and/or the client's device. As such, the use of HAS allows a service provider to offer video streaming over heterogeneous networks and to heterogeneous devices. Traditionally, the H. 264/AVC video codec is used for encoding the HAS content: for each offered video quality, a separate AVC video file is encoded. Obviously, this leads to a considerable storage redundancy at the video server as each video is available in a multitude of qualities. The recent Scalable Video Codec (SVC) extension of H. 264/AVC allows encoding a video into different quality layers: by dowloading one or more additional layers, the video quality can be improved. While this leads to an immediate reduction of required storage at the video server, the impact of using SVC-based HAS on the network and perceived quality by the user are less obvious. In this article, we characterize the performance of AVC- and SVC-based HAS in terms of perceived video quality, network load and client characteristics, with the goal of identifying advantages and disadvantages of both options

Study on QoS support in 802.11e-based multi-hop vehicular wireless ad hoc networks

Multimedia communications over vehicular ad hoc networks (VANET) will play an important role in the future intelligent transport system (ITS). QoS support for VANET therefore becomes an essential problem. In this paper, we first study the QoS performance in multi-hop VANET by using the standard IEEE 802.11e EDCA MAC and our proposed triple-constraint QoS routing protocol, Delay-Reliability-Hop (DeReHQ). In particular, we evaluate the DeReHQ protocol together with EDCA in highway and urban areas. Simulation results show that end-to-end delay performance can sometimes be achieved when both 802.11e EDCA and DeReHQ extended AODV are used. However, further studies on cross-layer optimization for QoS support in multi-hop environment are required

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Improving perceptual multimedia quality with an adaptable communication protocol

Copyrights @ 2005 University Computing Centre ZagrebInnovations and developments in networking technology have been driven by technical considerations with little analysis of the benefit to the user. In this paper we argue that network parameters that define the network Quality of Service (QoS) must be driven by user-centric parameters such as user expectations and requirements for multimedia transmitted over a network. To this end a mechanism for mapping user-oriented parameters to network QoS parameters is outlined. The paper surveys existing methods for mapping user requirements to the network. An adaptable communication system is implemented to validate the mapping. The architecture adapts to varying network conditions caused by congestion so as to maintain user expectations and requirements. The paper also surveys research in the area of adaptable communications architectures and protocols. Our results show that such a user-biased approach to networking does bring tangible benefits to the user

Effective video multicast over wireless internet

With the rapid growth of wireless networks and great success of Internet video, wireless video services are expected to be widely deployed in the near future. As different types of wireless networks are converging into all IP networks, i.e., the Internet, it is important to study video delivery over the wireless Internet. This paper proposes a novel end-system based adaptation protocol calledWireless Hybrid Adaptation Layered Multicast (WHALM) protocol for layered video multicast over wireless Internet. In WHALM the sender dynamically collects bandwidth distribution from the receivers and uses an optimal layer rate allocation mechanism to reduce the mismatches between the coarse-grained layer subscription levels and the heterogeneous and dynamic rate requirements from the receivers, thus maximizing the degree of satisfaction of all the receivers in a multicast session. Based on sampling theory and theory of probability, we reduce the required number of bandwidth feedbacks to a reasonable degree and use a scalable feedback mechanism to control the feedback process practically. WHALM is also tuned to perform well in wireless networks by integrating an end-to-end loss differentiation algorithm (LDA) to differentiate error losses from congestion losses at the receiver side. With a series of simulation experiments over NS platform, WHALM has been proved to be able to greatly improve the degree of satisfaction of all the receivers while avoiding congestion collapse on the wireless Internet

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks