A Wearable Mechatronic Device for Hand Tremor Monitoring and Suppression: Development and Evaluation

Tremor, one of the most disabling symptoms of Parkinson\u27s disease (PD), significantly affects the quality of life of the individuals who suffer from it. These people live with difficulties with fine motor tasks, such as eating and writing, and suffer from social embarrassment. Traditional medicines are often ineffective, and surgery is highly invasive and risky. The emergence of wearable technology facilitates an externally worn mechatronic tremor suppression device as a potential alternative approach for tremor management. However, no device has been developed for the suppression of finger tremor that has been validated on a human. It has been reported in the literature that tremor can be selectively suppressed by mechanical loading. Therefore, the objectives of this thesis were to develop a wearable tremor suppression device that can suppress tremor at the wrist and the fingers, and to evaluate it on individuals with PD in a pre-clinical trial. To address these objectives, several experiments were performed to quantify hand tremor; an enhanced high-order tremor estimator was developed and evaluated for tremor estimation; and a wearable tremor suppression glove (WTSG) was developed to suppress tremor in the index finger metacarpophalangeal (MCP) joint, the thumb MCP joint, and the wrist. A total of 18 individuals with PD were recruited for characterizing tremor. The frequencies and magnitudes of the linear acceleration, angular velocity, and angular displacement of tremor in the index finger MCP joint, the thumb MCP joint, and the wrist were quantified. The results showed that parkinsonian tremor consists of multiple harmonics, and that the second and third harmonics cannot be ignored. With the knowledge of the tremor characteristics, an enhanced high-order tremor estimator was developed to acquire better tremor estimation accuracy than its lower-order counterpart. In addition, the evaluation of the WTSG was conducted on both a physical tremor simulator and on one individual with PD. The results of the simulation study proved the feasibility of using the WTSG to suppress tremor; and the results of the evaluation on a human subject showed that the WTSG can suppress tremor motion while allowing the user to perform voluntary motions. The WTSG developed as a result of this work has demonstrated the feasibility of managing hand tremor with a mechatronic device, and its validation on a human subject has provided useful insights from the user\u27s perspectives, which facilitate the transition of the WTSG from the lab to the clinic, and eventually to commercial use. Lastly, an evaluation studying the impact of suppressed tremor on unrestricted joints was conducted on 14 individuals with PD. The results showed a significant increase in tremor magnitude in the unrestricted distal joints when the motions of the proximal joints were restricted. The average increase of the tremor magnitude of the index finger MCP joint, the thumb MCP joint, the wrist and the elbow are 54%, 96%, 124%, and 98% for resting tremor, and 50%, 102%, 49%, and 107% for postural tremor, respectively. Such a result provided additional clinical justification for the significance of the development of a wearable mechatronic device for hand tremor management. Although the focus of this thesis is on hand tremor management, the development and evaluation of a full upper-limb tremor suppression device is required as a future step, in order to advance the use of wearable mechatronic devices as one of the valid tremor treatment approaches

PT-Net: A Multi-Model Machine Learning Approach for Smarter Next-Generation Wearable Tremor Suppression Devices for Parkinson\u27s Disease Tremor

According to the World Health Organization (WHO), Parkinson\u27s Disease (PD) is the second most common neurodegenerative condition that can cause tremors and other motor and non motor related symptoms. Medication and deep brain stimulation (DBS) are often used to treat tremor; however, medication is not always effective and has adverse effects, and DBS is invasive and carries a significant risk of complications. Wearable tremor suppression devices (WTSDs) have been proposed as a possible alternative, but their effectiveness is limited by the tremor models they use, which introduce a phase delay that decreases the performance of the devices. Additionally, the availability of tremor datasets is limited, which prevents the rapid advancement of these devices. To address the challenges facing the WTSDs, PD tremor data were collected at the Wearable Biomechatronics Laboratory (WearMe Lab) to develop methods and data-driven models to improve the performance of WTSDs in managing tremor, and potentially to be integrated with the wearable tremor suppression glove that is being developed at the WearMe Lab. A predictive model was introduced and showed improved motion estimation with an average estimation accuracy of 99.2%. The model was also able to predict motion with multiple steps ahead, negating the phase delay introduced by previous models and achieving prediction accuracies of 97%, 94%, 92%, and 90\% for predicting voluntary motion 10, 20, 50, and 100 steps ahead, respectively. Tremor and task classification models were also developed, with mean classification accuracies of 91.2% and 91.1%, respectively. These models can be used to fine-tune the parameters of existing estimators based on the type of tremor and task, increasing their suppression capabilities. To address the absence of a mathematical model for generating tremor data and limited access to existing PD tremor datasets, an open-source generative model was developed to produce data with similar characteristics, distribution, and patterns to real data. The reliability of the generated data was evaluated using four different methods, showing that the generative model can produce data with similar distribution, patterns, and characteristics to real data. The development of data-driven models and methods to improve the performance of wearable tremor suppression devices for Parkinson\u27s disease can potentially offer a noninvasive and effective alternative to medication and deep brain stimulation. The proposed predictive model, classification model, and the open-source generative model provide a promising framework for the advancement of wearable technology for tremor suppression, potentially leading to a significant improvement in the quality of life for individuals with Parkinson\u27s disease

Towards the Development of a Wearable Tremor Suppression Glove

Patients diagnosed with Parkinson’s disease (PD) often associate with tremor. Among other symptoms of PD, tremor is the most aggressive symptom and it is difficult to control with traditional treatments. This thesis presents the assessment of Parkinsonian hand tremor in both the time domain and the frequency domain, the performance of a tremor estimator using different tremor models, and the development of a novel mechatronic transmission system for a wearable tremor suppression device. This transmission system functions as a mechatronic splitter that allows a single power source to support multiple independent applications. Unique features of this transmission system include low power consumption and adjustability in size and weight. Tremor assessment results showed that the hand tremor signal often presents a multi-harmonics pattern. The use of a multi-harmonics tremor model produced a better estimation result than using a monoharmonic tremor model

Safe Haptics-enabled Patient-Robot Interaction for Robotic and Telerobotic Rehabilitation of Neuromuscular Disorders: Control Design and Analysis

Motivation: Current statistics show that the population of seniors and the incidence rate of age-related neuromuscular disorders are rapidly increasing worldwide. Improving medical care is likely to increase the survival rate but will result in even more patients in need of Assistive, Rehabilitation and Assessment (ARA) services for extended periods which will place a significant burden on the world\u27s healthcare systems. In many cases, the only alternative is limited and often delayed outpatient therapy. The situation will be worse for patients in remote areas. One potential solution is to develop technologies that provide efficient and safe means of in-hospital and in-home kinesthetic rehabilitation. In this regard, Haptics-enabled Interactive Robotic Neurorehabilitation (HIRN) systems have been developed. Existing Challenges: Although there are specific advantages with the use of HIRN technologies, there still exist several technical and control challenges, e.g., (a) absence of direct interactive physical interaction between therapists and patients; (b) questionable adaptability and flexibility considering the sensorimotor needs of patients; (c) limited accessibility in remote areas; and (d) guaranteeing patient-robot interaction safety while maximizing system transparency, especially when high control effort is needed for severely disabled patients, when the robot is to be used in a patient\u27s home or when the patient experiences involuntary movements. These challenges have provided the motivation for this research. Research Statement: In this project, a novel haptics-enabled telerobotic rehabilitation framework is designed, analyzed and implemented that can be used as a new paradigm for delivering motor therapy which gives therapists direct kinesthetic supervision over the robotic rehabilitation procedure. The system also allows for kinesthetic remote and ultimately in-home rehabilitation. To guarantee interaction safety while maximizing the performance of the system, a new framework for designing stabilizing controllers is developed initially based on small-gain theory and then completed using strong passivity theory. The proposed control framework takes into account knowledge about the variable biomechanical capabilities of the patient\u27s limb(s) in absorbing interaction forces and mechanical energy. The technique is generalized for use for classical rehabilitation robotic systems to realize patient-robot interaction safety while enhancing performance. In the next step, the proposed telerobotic system is studied as a modality of training for classical HIRN systems. The goal is to first model and then regenerate the prescribed kinesthetic supervision of an expert therapist. To broaden the population of patients who can use the technology and HIRN systems, a new control strategy is designed for patients experiencing involuntary movements. As the last step, the outcomes of the proposed theoretical and technological developments are translated to designing assistive mechatronic tools for patients with force and motion control deficits. This study shows that proper augmentation of haptic inputs can not only enhance the transparency and safety of robotic and telerobotic rehabilitation systems, but it can also assist patients with force and motion control deficiencies

Pathological Tremor as a Mechanical System: Modeling and Control of Artificial Muscle-Based Tremor Suppression

Central nervous system disorders produce the undesired, approximately rhythmic movement of body parts known as pathological tremor. This undesired motion inhibits the patient\u27s ability to perform tasks of daily living and participate in society. Typical treatments are medications and deep brain stimulation surgery, both of which include risks, side effects, and varying efficacy. Since the pathophysiology of tremor is not well understood, empirical investigation drives tremor treatment development. This dissertation explores tremor from a mechanical systems perspective to work towards theory-driven treatment design. The primary negative outcome of pathological tremor is the undesired movement of body parts: mechanically suppressing this motion provides effective tremor treatment by restoring limb function. Unlike typical treatments, the mechanisms for mechanical tremor suppression are well understood: applying joint torques that oppose tremor-producing muscular torques will reduce tremor irrespective of central nervous system pathophysiology. However, a tremor suppression system must also consider voluntary movements. For example, mechanically constraining the arm in a rigid cast eliminates tremor motion, but also eliminates the ability to produce voluntary motions. Indeed, passive mechanical systems typically reduce tremor and voluntary motions equally due to the close proximity of their frequency content. Thus, mechanical tremor suppression requires active actuation to reduce tremor with minimal influence on voluntary motion. However, typical engineering actuators are rigid and bulky, preventing clinical implementations. This dissertation explores dielectric elastomers as tremor suppression actuators to improve clinical implementation potential of mechanical tremor suppression. Dielectric elastomers are often called artificial muscles due to their similar mechanical properties as human muscle; these similarities may enable relatively soft, low-profile implementations. The primary drawback of dielectric elastomers is their relatively low actuation levels compared to typical actuators. This research develops a tremor-active approach to dielectric elastomer-based tremor suppression. In a tremor-active approach, the actuators only actuate to oppose tremor, while the human motor system must overcome the passive actuator dynamics. This approach leverages the low mechanical impedance of dielectric elastomers to overcome their low actuation levels. Simulations with recorded tremor datasets demonstrate excellent and robust tremor suppression performance. Benchtop experiments validate the control approach on a scaled system. Since dielectric elastomers are not yet commercially available, this research quantifies the necessary dielectric elastomer parameters to enable clinical implementations and evaluates the potential of manufacturing approaches in the literature to achieve these parameters. Overall, tremor-active control using dielectric elastomers represents a promising alternative to medications and surgery. Such a system may achieve comparable tremor reduction as medications and deep brain stimulation with minimal risks and greater efficacy, but at the cost of increased patient effort to produce voluntary motions. Parallel advances in scaled dielectric elastomer manufacturing processes and high-voltage power electronics will enable consumer implementations. In addition to tremor suppression, this dissertation investigates the mechanisms of central nervous system tremor generation from a control systems perspective. This research investigates a delay-based model for parkinsonian tremor. Besides tremor, Parkinson\u27s disease generally inhibits movement, with typical symptoms including rigidity, bradykinesia, and increased reaction times. This fact raises the question as to how the same disease produces excessive movement (tremor) despite characteristically inhibiting movement. One possible answer is that excessive central nervous system inhibition produces unaccounted feedback delays that cause instability. This dissertation develops an optimal control model of human motor control with an unaccounted delay between the state estimator and controller. This delay represents the increased inhibition projected from the basal ganglia to the thalamus, delaying signals traveling from the cerebellum (estimator) to the primary motor cortex (controller). Model simulations show increased delays decrease tremor frequency and increase tremor amplitude, consistent with the evolution of tremor as the disease progresses. Simulations that incorporate tremor resetting and random variation in control saturation produce simulated tremor with similar characteristics as recorded tremor. Delay-induced tremor explains the effectiveness of deep brain stimulation in both the thalamus and basal ganglia since both regions contribute to the presence of feedback delay. Clinical evaluation of mechanical tremor suppression may provide clinical evidence for delay-induced tremor: unlike state-independent tremor, suppression of delay-induced tremor increases tremor frequency. Altogether, establishing the mechanisms for tremor generation will facilitate pathways towards improved treatments and cure development

Social work with airports passengers

Social work at the airport is in to offer to passengers social services. The main methodological position is that people are under stress, which characterized by a particular set of characteristics in appearance and behavior. In such circumstances passenger attracts in his actions some attention. Only person whom he trusts can help him with the documents or psychologically