20 research outputs found
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology
L'abstract è presente nell'allegato / the abstract is in the attachmen
OFDM passive radar employing compressive processing in MIMO configurations
A key advantage of passive radar is that it provides a means of performing position detection and tracking without the need for transmission of energy pulses. In this respect, passive radar systems utilising (receiving) orthogonal frequency division multiplexing (OFDM) communications signals from transmitters using OFDM standards such as long term evolution (LTE), WiMax or WiFi, are considered. Receiving a stronger reference signal for the matched filtering, detecting a lower target signature is one of the challenges in the passive radar. Impinging at the receiver, the OFDM waveforms supply two-dimensional virtual uniform rectangul ararray with the first and second dimensions refer to time delays and Doppler frequencies respectively. A subspace method, multiple signals classification (MUSIC) algorithm, demonstrated the signal extraction using multiple time samples. Apply normal measurements, this problem requires high computational resources regarding the number of OFDM subcarriers. For sub-Nyquist sampling, compressive sensing (CS) becomes attractive. A single snap shot measurement can be applied with Basis Pursuit (BP), whereas l1-singular value decomposition (l1-SVD) is applied for the multiple snapshots. Employing multiple transmitters, the diversity in the detection process can be achieved. While a passive means of attaining three-dimensional large-set measurements is provided by co-located receivers, there is a significant computational burden in terms of the on-line analysis of such data sets. In this thesis, the passive radar problem is presented as a mathematically sparse problem and interesting solutions, BP and l1-SVD as well as Bayesian compressive sensing, fast-Besselk, are considered. To increase the possibility of target signal detection, beamforming in the compressive domain is also introduced with the application of conve xoptimization and subspace orthogonality. An interference study is also another problem when reconstructing the target signal. The networks of passive radars are employed using stochastic geometry in order to understand the characteristics of interference, and the effect of signal to interference plus noise ratio (SINR). The results demonstrate the outstanding performance of l1-SVD over MUSIC when employing multiple snapshots. The single snapshot problem along with fast-BesselK multiple-input multiple-output configuration can be solved using fast-BesselK and this allows the compressive beamforming for detection capability
Enhanced Air-Interfaces for Fifth Generation Mobile Broadband Communication
In broadband wireless multicarrier communication systems, intersymbol interference (ISI) and intercarrier interference (ICI) should be reduced. In orthogonal frequency division multiplexing (OFDM), the cyclic prefix (CP) guarantees to reduce the ISI interference. However, the CP reduces spectral and power efficiency. In this thesis, iterative interference cancellation (IIC) with iterative decoding is used to reduce ISI and ICI from the received signal in multicarrier modulation (MCM) systems. Alternative schemes as well as OFDM with insufficient CP are considered; filter bank multicarrier (FBMC/Offset QAM) and discrete wavelet transform based multicarrier modulation (DWT-MCM). IIC is applied in these different schemes. The required components are calculated from either the hard decision of the demapper output or the estimated decoded signal. These components are used to improve the received signal. Channel estimation and data detection are very important parts of the receiver design of the wireless communication systems. Iterative channel estimation using Wiener filter channel estimation with known pilots and IIC is used to estimate and improve data detection. Scattered and interference approximation method (IAM) preamble pilot are using to calculate the estimated values of the channel coefficients. The estimated soft decoded symbols with pilot are used to reduce the ICI and ISI and improve the channel estimation. The combination of Multi-Input Multi-Output MIMO and OFDM enhances the air-interface for the wireless communication system. In a MIMO-MCM scheme, IIC and MIMO-IIC-based successive interference cancellation (SIC) are proposed to reduce the ICI/ISI and cross interference to a given antenna from the signal transmitted from the target and the other antenna respectively. The number of iterations required can be calculated by analysing the convergence of the IIC with the help of EXtrinsic Information Transfer (EXIT) charts. A new EXIT approach is proposed to provide a means to define performance for a given outage probability on quasi-static channels
Estudo de formas de onda e conceção de algoritmos para operação conjunta de sistemas de comunicação e radar
The focus of this thesis is the processing of signals and design of algorithms
that can be used to enable radar functions in communications systems.
Orthogonal frequency division multiplexing (OFDM) is a popular multicarrier
modulation waveform in communication systems. As a wideband
signal, OFDM improves resolution and enables spectral efficiency in radar
systems, while also improving detection performance thanks to its inherent
frequency diversity. This thesis aims to use multicarrier waveforms for radar
systems, to enable the simultaneous operation of radar and communication
functions on the same device. The thesis is divided in two parts. The first
part, studies the adaptation and application of other multicarrier waveforms
to radar functions. At the present time many studies have been carried out
to jointly use the OFDM signal for communication and radar functions, but
other waveforms have shown to be possible candidates for communication
applications. Therefore, studies on the evaluation of the application of these
same signals to radar functions are necessary. In this thesis, to demonstrate
that other multicarrier waveforms can overcome the OFDM waveform
in radar/communication (RadCom) systems, we propose the adaptation of
the filter bank multicarrier (FBMC), generalized frequency division multiplexing
(GFDM) and universal filtering multicarrier (UFMC) waveforms for radar
functions. These alternative waveforms were compared performance-wise
regarding achievable target parameter estimation performance, amount of
residual background noise in the radar image, impact of intersystem interference
and flexibility of parameterization. In the second part of the thesis,
signal processing techniques are explored to solve some of the limitations
of the use of multicarrier waveforms for RadCom systems. Radar systems
based on OFDM are promising candidates for future intelligent transport networks.
Exploring the dual functionality enabled by OFDM, we presents cooperative
methods for high-resolution delay-Doppler and direction-of-arrival
estimation. High-resolution parameter estimation is an important requirement
for automotive radar systems, especially in multi-target scenarios that
require reliable target separation performance. By exploring the cooperation
between vehicles, the studies presented in this thesis also enable the distributed
tracking of targets. The result is a highly accurate multi-target tracking
across the entire cooperative vehicle network, leading to improvements
in transport reliability and safety.O foco desta tese é o processamento de sinais e desenvolvimento de algoritmos
que podem ser utilizados para a habilitar a função de radar nos sistemas
de comunicação. OFDM (Orthogonal Frequency Division Multiplexing)
é uma forma de onda com modulação multi-portadora, popular em sistemas
de comunicação. Para sistemas de radar, O OFDM melhora a resolução e
fornece eficiência espectral, além disso sua diversidade de frequências melhora
o desempenho na detecção do radar. Essa tese tem como objetivo
utilizar formas de onda multi-portadoras para sistemas de radar, possibilitando
a operação simultânea de funções de radar e de comunicação num
mesmo dispositivo. A tese esta dividida em duas partes. Na primeira parte
da tese são realizados estudos da adaptabilidade de outras formas de onda
multi-portadora para funções de radar. Nos dias atuais, muitos estudos sobre
o uso do sinal OFDM para funções de comunicação e radar vêm sendo
realizados, no entanto, outras formas de onda mostram-se possíveis candidatas
a aplicações em sistemas de comunicação, e assim, avaliações para
funções de sistema de radar se tornam necessárias. Nesta tese, com a
intenção de demonstrar que formas de onda multi-portadoras alternativas
podem superar o OFDM nos sistemas de Radar/comunicação (RadCom),
propomos a adaptação das seguintes formas de onda: FBMC (Filter Bank
Multicarrier); GFDM (Generalized Frequency Division Multiplexing); e UFMC
(Universal Filtering Multicarrier) para funções de radar. Também produzimos
uma análise de desempenho dessas formas de onda sobre o aspecto
da estimativa de parâmetros-alvo, ruído de fundo, interferência entre sistemas
e parametrização do sistema. Na segunda parte da tese serão explorados
técnicas de processamento de sinal de forma a solucionar algumas
das limitações do uso de formas de ondas multi-portadora para sistemas
RadCom. Os sistemas de radar baseados no OFDM são candidatos
promissores para futuras redes de transporte inteligentes, porque combinam
funções de estimativa de alvo com funções de rede de comunicação
em um único sistema. Explorando a funcionalidade dupla habilitada pelo
OFDM, nesta tese, apresentamos métodos cooperativos de alta resolução
para estimar o posição, velocidade e direção dos alvos. A estimativa de
parâmetros de alta resolução é um requisito importante para sistemas de
radar automotivo, especialmente em cenários de múltiplos alvos que exigem
melhor desempenho de separação de alvos. Ao explorar a cooperação entre
veículos, os estudos apresentados nesta tese também permitem o rastreamento
distribuído de alvos. O resultado é um rastreamento multi-alvo altamente
preciso em toda a rede de veículos cooperativos, levando a melhorias
na confiabilidade e segurança do transporte.Programa Doutoral em Telecomunicaçõe
6G wireless communications networks: a comprehensive survey
The commercial fifth-generation (5G) wireless communications networks have already been deployed with the aim of providing high data rates. However, the rapid growth in the number of smart devices and the emergence of the Internet of Everything (IoE) applications, which require an ultra-reliable and low-latency communication, will result in a substantial burden on the 5G wireless networks. As such, the data rate that could be supplied by 5G networks will unlikely sustain the enormous ongoing data traffic explosion. This has motivated research into continuing to advance the existing wireless networks toward the future generation of cellular systems, known as sixth generation (6G). Therefore, it is essential to provide a prospective vision of the 6G and the key enabling technologies for realizing future networks. To this end, this paper presents a comprehensive review/survey of the future evolution of 6G networks. Specifically, the objective of the paper is to provide a comprehensive review/survey about the key enabling technologies for 6G networks, which include a discussion about the main operation principles of each technology, envisioned potential applications, current state-of-the-art research, and the related technical challenges. Overall, this paper provides useful information for industries and academic researchers and discusses the potentials for opening up new research directions