3,393 research outputs found
Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview
Disturbance Observer has been one of the most widely used robust control
tools since it was proposed in 1983. This paper introduces the origins of
Disturbance Observer and presents a survey of the major results on Disturbance
Observer-based robust control in the last thirty-five years. Furthermore, it
explains the analysis and synthesis techniques of Disturbance Observer-based
robust control for linear and nonlinear systems by using a unified framework.
In the last section, this paper presents concluding remarks on Disturbance
Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure
A Stability Analysis for the Acceleration-based Robust Position Control of Robot Manipulators via Disturbance Observer
This paper proposes a new nonlinear stability analysis for the
acceleration-based robust position control of robot manipulators by using
Disturbance Observer (DOb). It is shown that if the nominal inertia matrix is
properly tuned in the design of DOb, then the position error asymptotically
goes to zero in regulation control and is uniformly ultimately bounded in
trajectory tracking control. As the bandwidth of DOb and the nominal inertia
matrix are increased, the bound of error shrinks, i.e., the robust stability
and performance of the position control system are improved. However, neither
the bandwidth of DOb nor the nominal inertia matrix can be freely increased due
to practical design constraints, e.g., the robust position controller becomes
more noise sensitive when they are increased. The proposed stability analysis
provides insights regarding the dynamic behavior of DOb-based robust motion
control systems. It is theoretically and experimentally proved that
non-diagonal elements of the nominal inertia matrix are useful to improve the
stability and adjust the trade-off between the robustness and noise
sensitivity. The validity of the proposal is verified by simulation and
experimental results.Comment: 9 pages, 9 figures, Journa
Terminal sliding mode control strategy design for second-order nonlinear system
This study mainly focuses on the terminal sliding mode control (TSMC) strategy design, including an adaptive terminal sliding mode control (ATSMC) and an exact-estimator-based terminal sliding mode control (ETSMC) for second-order nonlinear dynamical systems. In the ATSMC system, an adaptive bound estimation for the lump uncertainty is proposed to ensure the system stability. On the other hand, an exact estimator is designed for exact estimating system uncertainties to solve the trouble of chattering phenomena caused by a sign function in ATSMC law in despite of the utilization of a fixed value or an adaptive tuning algorithm for the lumped uncertainty bound. The effectiveness of the proposed control schemes can be verified in numerical simulations.<br /
Robust tuning of robot control systems
The computed torque control problem is examined for a robot arm with flexible, geared, joint drive systems which are typical in many industrial robots. The standard computed torque algorithm is not directly applicable to this class of manipulators because of the dynamics introduced by the joint drive system. The proposed approach to computed torque control combines a computed torque algorithm with torque controller at each joint. Three such control schemes are proposed. The first scheme uses the joint torque control system currently implemented on the robot arm and a novel form of the computed torque algorithm. The other two use the standard computed torque algorithm and a novel model following torque control system based on model following techniques. Standard tasks and performance indices are used to evaluate the performance of the controllers. Both numerical simulations and experiments are used in evaluation. The study shows that all three proposed systems lead to improved tracking performance over a conventional PD controller
Trajectory generation of space telerobots
The purpose is to review a variety of trajectory generation techniques which may be applied to space telerobots and to identify problems which need to be addressed in future telerobot motion control systems. As a starting point for the development of motion generation systems for space telerobots, the operation and limitations of traditional path-oriented trajectory generation approaches are discussed. This discussion leads to a description of more advanced techniques which have been demonstrated in research laboratories, and their potential applicability to space telerobots. Examples of this work include systems that incorporate sensory-interactive motion capability and optimal motion planning. Additional considerations which need to be addressed for motion control of a space telerobot are described, such as redundancy resolution and the description and generation of constrained and multi-armed cooperative motions. A task decomposition module for a hierarchical telerobot control system which will serve as a testbed for trajectory generation approaches which address these issues is also discussed briefly
A discrete decentralized variable structure robotic controller
A decentralized trajectory controller for robotic manipulators is designed and tested using a multiprocessor architecture and a PUMA 560 robot arm. The controller is made up of a nominal model-based component and a correction component based on a variable structure suction control approach. The second control component is designed using bounds on the difference between the used and actual values of the model parameters. Since the continuous manipulator system is digitally controlled along a trajectory, a discretized equivalent model of the manipulator is used to derive the controller. The motivation for decentralized control is that the derived algorithms can be executed in parallel using a distributed, relatively inexpensive, architecture where each joint is assigned a microprocessor. Nonlinear interaction and coupling between joints is treated as a disturbance torque that is estimated and compensated for
- …