Medium-transparent MAC protocols for converged optical wireless networks

In order to address the explosive demand for high-capacity and omnipresent wireless access, modern cell-based wireless networks are slowly adopting two major solution roadmaps. The first is the employment of small-cell formations in order to increase the overall spectral efficiency, whereas the second is the employment of higher frequency bands, such as the mm-wave 60GHz band, that offers vast amounts of bandwidth. Depending on the specific application, the above solutions inevitably require the installation and operational management of large amounts of Base Stations (BSs) or Access Points (APs), which ultimately diminishes the overall cost-effectiveness of the architecture. In order to reduce the system cost, Radio over Fiber (RoF) technology has been put forward as an ideal candidate solution, due to the fact that it provides functionally simple antenna units, often termed as Remote Antenna Units (RAUs) that are interconnected to a central managing entity, termed as the Central Office (CO), via an optical fiber. Although extensive research efforts have been dedicated to the development of the physical layer aspects regarding RoF technologies, such as CO/RAU physical layer design and radio signal transport techniques over fiber, very limited efforts have con-centrated on upper layer and resource management issues. In this dissertation, we are concerned with access control and resource management of RoF-based mm-wave network architectures targeting the exploitation of the dual medium and its centralized control properties in order to perform optimal optical/wireless/time resource allocation. In this dissertation, we propose a Medium-Transparent MAC (MT-MAC) protocol that concurrently administers the optical and wireless resources of a 60GHz RoF based network, seamlessly connecting the CO to the wireless terminals through minimal RAU intervention. In this way, the MT-MAC protocol forms extended reach 60GHz WLAN networks offering connectivity amongst wireless devices that are attached to the same or different RAUs under both Line of Sight (LOS) and non LOS conditions. The notion of medium-transparency relies on two parallel contention periods, the first in the optical domain and the second in the wireless frequency and time domains, with nested dataframe structures. The MT-MAC operation is based on a proposed RAU design that allows for wavelength selectivity functions, thus being compatible with completely passive optical distribution network implementations that are predominately used by telecom operators today. Two variants of the MT-MAC protocol are considered. The first offers dynamic wavelength allocation with fixed time windows, whereas the second targets fairness-sensitive applications by offering dynamic wavelength allocation with dynamic transmission opportunity window sizes, based on the number of active clients connected at each RAU. Both variants of the protocol are evaluated by both simulation and analytical means. For the latter part, this thesis introduces two analytical models for calculating saturation throughput and non-saturation packet delay for the converged MT-MAC protocol. Finally, this thesis presents an extensive study regarding the network planning and formation of 60GHz Gigabit WLAN networks when the latter are deployed over existing Passive Optical Network (PON) infrastructures. Three possible architectures where studied: i) the RoF approach, ii) the Radio & Fiber approach and iii) the hybrid RoF-plus-R&F approach that combines the properties of both the aforementioned architectures. During the elaboration of this thesis, one major key conclusion has been extracted. The work proposed in this thesis considers that there is a fundamental requirement for implementing new converged optical/wireless MAC protocols, that have the complete overview of both available resources in order to effectively administer the hybrid Radio-over-Fiber networks.A fin de atender la demanda explosiva de alta capacidad y acceso inalámbrico omnipresente, las redes inalámbricas basadas en celdas están poco a poco adoptando dos principales guías de solución. La primera es el empleo de formaciones de celdas pequeñas con el fin de aumentar la eficiencia espectral global, mientras que la segunda es el empleo de bandas de frecuencia superior, como la banda de 60GHz, la cual ofrece una gran cantidad de ancho de banda. Dependiendo de la aplicación en específico, las soluciones anteriores inevitable-mente requieren de una instalación y una gestión operativa de grandes cantidades de Estaciones Base o Puntos de Acceso, que en última instancia disminuye la rentabilidad de la arquitectura. Para reducir el coste, la tecnología radioeléctrica por fibra (RoF) se presenta como una solución ideal debido al hecho de que proporciona unidades de antenas de sim-ple funcionamiento, a menudo denominadas Unidades de Antenas Remotas (RAUs), las cuales están interconectadas a una entidad central de gestión, denominada Oficina Central (CO), a través de la fibra óptica. A pesar de que se han dedicado muchos esfuerzos de investigación al desarrollo de varios aspectos de las capas física con respecto a las tecnologías RoF, muy pocos esfuerzos se han concentrado en la capa superior y cuestiones de gestión de recursos. En esta tesis, nos enfocando en el control de acceso y gestión de recursos de arquitecturas RoF y comunicaciones milimétricas, con el fin de aprovechar y explotar el medio dual y las propiedades para realizar una óptima asignación de los recursos ópticos, inalámbricos y temporales. Nosotros proponemos un protocolo Transparente al Medio MAC (MT-MAC) que simultáneamente administre los recursos ópticos e inalámbricos de una red RoF a 60GHz, conectando a la perfección el CO a los terminales inalámbricos a través de una mínima intervención RAU. El protocolo MT-MAC forma unas redes WLAN 60GHz de alcance extendido, ofreciendo así conectividad entre los dispositivos inalámbricos que están conectados al mismo o diferentes RAUs bajo con o sin Línea de Vista (condiciones LOS o NLOS) respectivamente. La noción de transparencia al medio se basa en dos períodos de contención para-lelos, el primero en el dominio óptico y el segundo en la frecuencia inalámbrica y dominio del tiempo, con estructuras de datos anidados. La operación MT-MAC se basa en proponer un diseño RAU que permita la selectividad de funciones de longitud de onda. Dos variantes del protocolo MT- MAC son considerados; el primer ofrece asignación de longitud de onda dinámica con ventanas de tiempo fijo, mientras que la segunda tiene como objetivo entornos de aplicaciones sensibles ofreciendo asignación de longitud de onda con tamaño de ventana de oportunidad de transmisión dinámico, basado en el número de clientes conectados en cada RAU. Ambas variantes del protocolo están evaluadas tanto por medios analíticos como de simulación. En la segunda parte, esta tesis introduce dos modelos analíticos para calcular el rendimiento de saturación y no saturación del retardo de paquetes para el protocolo MT-MAC convergente. Finalmente, esta tesis presenta un extenso estudio de la planificación de red y la formación de redes 60GHz Gigabit WLAN cuando esta se encuentra desplegada sobre las ya existente infraestructuras de Redes Ópticas Pasivas (PONs). Tres posibles arquitecturas han sido estudiadas: i) el enfoque RoF, ii) el enfoque Radio y Fibra , y iii) el enfoque híbrido, RoF más R&F el cual combina las propiedades de ambas arquitecturas anteriormente mencionadas. Durante la elaboración de esta tesis, se ha extraído una importante conclusión: hay un requerimiento fundamental para implementar nuevos protocolos ópticos/inalámbricos convergentes, que tengan una completa visión de ambos recursos disponibles para poder administrar efectivamente las redes de tecnología RoF.Postprint (published version

Conectividade definida por software em ambientes móveis

Broadband Internet access on trains has become an expected service for passengers, and the rise in quality demand has been posing a challenge to service providers. There are solutions for Internet access on trains that lack the flexibility and redundancy needed for an improved QoS in the network. Thus, this dissertation studies two new load balancing solutions, one distributed and the other centralized. In an emulated train network, routers of each car communicate their network statistics to other nodes of the network, to be used in load balancing decisions. In the distributed solution, each router has the capacity to make load balancing decisions, while in the centralized solution, an onboard controller makes those decisions. The latter solution is based on load balancing in an SDN environment. In this system, a remote entity aggregates the passengers’ traffic and forwards it to an external network, or to the Internet. The systems must provide an improved quality of experience to the passengers on the train and the total avaliable bandwidth should be distributed evenly by all cars. Requirements were established for the systems, which were developed after an in-depth analysis of solutions for Internet access on board found in the literature. After obtaining the results of the performance tests, it was concluded that the systems improve the QoE of the passengers, as long as the network conditions are approximately constant for an extended period.O acesso à Internet de banda larga em comboios tornou-se num serviço esperado por parte dos passageiros e o aumento na exigência de qualidade tem constituído um desafio para os prestadores de serviços. Existem soluções de acesso à Internet em comboios que carecem da flexibilidade e redundância necessárias para uma melhor qualidade de serviço na rede. Assim, esta dissertação estuda duas novas soluções de balanceamento de carga, uma distribuída e outra centralizada. Numa rede de comboio emulada, routers de cada carruagem comunicam as suas estatísticas de rede para outros nós da rede, para posteriormente serem tomadas decisões de balanceamento de carga. Na solução distribuída, cada router tem capacidade de tomar decisões de balanceamento de carga, enquanto que na solução centralizada, um controlador dentro do comboio toma essas decisões. Esta última solução baseiase num balanceamento de carga em ambiente SDN. Neste sistema, uma entidade remota agrega o tráfego dos passageiros e encaminha-o para uma rede externa, ou para a Internet. Os sistemas devem proporcionar uma qualidade de experiência melhorada aos passageiros do comboio e a largura de banda total disponível deve ser distribuída mais uniformememente por todas as carruagens. Requisitos foram estabelecidos para os sistemas, que foram desenvolvidos após uma análise aprofundada das soluções de acesso à Internet em comboios encontradas na literatura. Após a obtenção dos resultados dos testes de desempenho, concluiu-se que as duas soluções melhoram o QoE dos passageiros, desde que as condições da rede sejam aproximadamente constantes durante um certo período.Mestrado em Engenharia de Computadores e Telemátic

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Multimode fibre broadband access and self-referencing sensor networks

Future Internet Access technologies are supposed to bring us a very performing connection to the main door of our homes. At the same time, new services and devices and their increase use will require data transfers at speeds exceeding 1Gbps inside the building or home at the horizon 2012. Both drivers lead to the deployment of a high-quality, futureproof network inside buildings and homes. This environment may end up taking advantage of optical cabling solutions as an alternative to more traditional copper or pure wireless approaches. Related to this latter fact, the objectives of this work are: • The achievement of a full convergence scenario between optical networks from the telecommunication services providers to the end users underscores the necessity of accurate and realistic fibre models in assessing the performance of broadband access networks with the premises of high-capacity and total compatibility. Silicabased MMFs and PF GIPOFs are the most promising candidates for such a convergence within the in-building/home scenario. Contributions to a better understanding of the possibilities of signal transmission outside the baseband of such fibres are investigated, in order to extend their capabilities, together with the evaluation of current fibre frequency response theoretical models by means of an extensive set of measurements. • The achievement of a full convergence scenario between optical networks from the telecommunication services providers to the end users is also contingent on research and development in the field of optical fibre sensors, mainly driven by the growing demand of fully building/home and industry automation, leading to a reliable integration of the optical networks. Related to this, development of multiplexing and measurement techniques for fibre-optic intensity-based sensors are analyzed and experimentally investigated. In the sensor network topology proposed, by replacing the fibre delay line with an electronic delay in the reception stage, it is possible to avoid long fibre delay coils in the remote sensing points and achieving a compact, flexible and re-configurable self-referencing technique. Applications in both scenarios can be considered, on the one hand the in-building/home network and on the other hand the WDM-PON access network topology through which operators provision the different services. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------La demanda e incursión en la sociedad de nuevos servicios multimedia, tales como televisión por Internet (IPTV, Internet Protocol Television) o video-bajo-demanda (VoD, Video on Demand) junto con el incremento del tráfico de datos requerido para nuevas aplicaciones como la televisión por alta definición (HDTV, High-Definition Television) y transferencias P2P (Peer-to-Peer) exigen un aumento de la capacidad de las redes de datos desplegadas hoy en día. Para hacer frente a este aumento de la demanda de capacidad de las redes de acceso, los proveedores de estos servicios multimedia están reemplazando las infraestructuras de las redes de acceso basadas en cable coaxial, tales como xDSL (x- Digital Subscriber Line), por otras nuevas de mayor capacidad desplegadas en fibra óptica, permitiendo la interconexión de los nodos de red con los múltiples hogares y negocios de los abonados, constituyendo el núcleo de lo que es conocido como “fibra hasta el hogar/nodo/edificio” o redes FTTx. Tradicionalmente el despliegue de las redes ópticas se ha realizado mediante fibra óptica monomodo de sílice (SMF, Singlemode Fibre). Ello es debido a su gran ancho de banda que permite una gran capacidad de transporte de servicios y datos. Es por ello que en base a este tipo de fibra se ha realizado el despliegue de redes de distribución y metropolitanas y, de un tiempo a esta parte, incluso penetrando su instalación en las redes de acceso. Junto con lo anteriormente expuesto, existe una necesidad de convergencia de servicios e infraestructuras dentro de las redes de acceso. Actualmente, cables coaxiales, par trenzado de cobre e incluso señales inalámbricas se encuentran entremezcladas dentro del hogar proporcionando servicios diferentes con apenas cooperación entre ellos. Una infraestructura común dentro del hogar en el que una gran cantidad de servicios pudieran ser integrados y soportados por la misma sería un aspecto deseable. Y es más, frente a las desventajas de infraestructuras basadas en cable de cobre (cable coaxial y par trenzado) como son susceptibilidad a interferencias electromagnéticas, presencia de crosstalk y relativa baja capacidad de transporte de datos, las fibras ópticas (tanto en su versión monomodo como multimodo) presentan las ventajas de un menor volumen, mayor flexibilidad y menor peso junto con una capacidad mayor de transmisión de datos sobre distancias mayores. Es por esto que éstas últimas constituyen la base para las futuras redes de acceso en el hogar