Adaptive backstepping control for ship nonlinear active fin system based on disturbance observer and neural network

Adaptive backstepping control based on disturbance observer and neural network for ship nonlinear active fin system is proposed. One disturbance observer is given to observe the disturbances of the system, by this way, the response time is shorten and the negative impact of disturbance and uncertain elements of the system is reduced. In addition, radial basic function neural network (RBFNN) is proposed to approach the unknown elements in the ship nonlinear active fin system, therefor the system can obtain good roll reduction effectiveness and overcome the uncertainties of the model, the designed controller can maintain the ship roll angle at desired value. Finally, the simulation results are given for a supply vessel to verify the successfulness of the proposed controller

Automatic Control and Routing of Marine Vessels

Due to the intensive development of the global economy, many problems are constantly emerging connected to the safety of ships’ motion in the context of increasing marine traffic. These problems seem to be especially significant for the further development of marine transportation services, with the need to considerably increase their efficiency and reliability. One of the most commonly used approaches to ensuring safety and efficiency is the wide implementation of various automated systems for guidance and control, including such popular systems as marine autopilots, dynamic positioning systems, speed control systems, automatic routing installations, etc. This Special Issue focuses on various problems related to the analysis, design, modelling, and operation of the aforementioned systems. It covers such actual problems as tracking control, path following control, ship weather routing, course keeping control, control of autonomous underwater vehicles, ship collision avoidance. These problems are investigated using methods such as neural networks, sliding mode control, genetic algorithms, L2-gain approach, optimal damping concept, fuzzy logic and others. This Special Issue is intended to present and discuss significant contemporary problems in the areas of automatic control and the routing of marine vessels

Simulation Studies Relating to Rudder Roll Stabilization of a Container Ship Using Neural Networks

International audienceRRS (Rudder Roll Stabilization) of Ships is a difficult problem because of its associated non-linear dynamics, coupling effects and complex control requirements. This paper proposes a solution of this stabilization problem that is based on an ANN (Artificial Neural Network) controller. The controller has been trained using supervised learning. The simulation studies have been carried out using MATLAB and a non-linear model of a container ship. It has been demonstrated that the proposed controller regulates heading and also controls roll angle very successfully

Simulation studies relating to rudder roll stabilization of a container ship using neural networks

RRS (Rudder Roll Stabilization) of Ships is a difficult problem because of its associated non-linear dynamics, coupling effects and complex control requirements. This paper proposes a solution of this stabilization problem that is based on an ANN (Artificial Neural Network) controller. The controller has been trained using supervised learning. The simulation studies have been carried out using MATLAB and a non-linear model of a container ship. It has been demonstrated that the proposed controller regulates heading and also controls roll angle very successfully

Simulation Studies Relating to Rudder Roll Stabilization of a Container Ship Using Neural Networks

RRS (Rudder Roll Stabilization) of Ships is a difficult problem because of its associated non-linear dynamics, coupling effects and complex control requirements. This paper proposes a solution of this stabilization problem that is based on an ANN (Artificial Neural Network) controller. The controller has been trained using supervised learning. The simulation studies have been carried out using MATLAB and a non-linear model of a container ship. It has been demonstrated that the proposed controller regulates heading and also controls roll angle very successfully

Passive and Active Nonlinear Control of Ship Roll Motions Using U-Tube Tanks

A U-tube water tank is first designed to roll a ship floating on still water. The 6-degree of freedom (DOF) dynamic model of U-tube tank is derived and the effects of its parameters on ship roll motion are studied. Numerical simulations show that the U-tube tank is an effective stimulator to roll the ship on still water. For a rolling ship, the U-tube tank can be used as a damper to reduce ship roll motion quickly. Active control of ship roll motion with a proportional and derivative (PD) controller, linear quadratic regulator (LQR), generalized predictive control (GPC), and deadbeat predictive control (DPC) is studied using a U-tube water tank as actuator is studied. For the predictive control, system identification is applied to update the parameters of the linear ship roll model with a U-tube tank when the ship dynamics changes. Numerical simulations show that GPC has the best performance and the U-tube tank is effective in ship roll mitigation. Nonlinear ship roll mitigation with passive U-tube tank, U-tube tank using feedback linearization with completely known system parameters, and U-tube tank using adaptive fuzzy feedback linearization control with unknown system parameters, are also studied. In numerical simulation, a passive U-tube tank and feedback linearization help to reduce ship roll motion and capsizing compared to a ship without the U-tube tank. Feedback linearization is the most effective means of controlling ship roll motion, and adaptive feedback linearization is more effective than a passive U-tube tank

Automatic Landing of a Rotary-Wing UAV in Rough Seas

Rotary-wing unmanned aerial vehicles (RUAVs) have created extensive interest in the past few decades due to their unique manoeuverability and because of their suitability in a variety of flight missions ranging from traffic inspection to surveillance and reconnaissance. The ability of a RUAV to operate from a ship in the presence of adverse winds and deck motion could greatly extend its applications in both military and civilian roles. This requires the design of a flight control system to achieve safe and reliable automatic landings. Although ground-based landings in various scenarios have been investigated and some satisfactory flight test results are obtained, automatic shipboard recovery is still a dangerous and challenging task. Also, the highly coupled and inherently unstable flight dynamics of the helicopter exacerbate the difficulty in designing a flight control system which would enable the RUAV to attenuate the gust effect. This thesis makes both theoretical and technical contributions to the shipboard recovery problem of the RUAV operating in rough seas. The first main contribution involves a novel automatic landing scheme which reduces time, cost and experimental resources in the design and testing of the RUAV/ship landing system. The novelty of the proposed landing system enables the RUAV to track slow-varying mean deck height instead of instantaneous deck motion to reduce vertical oscillations. This is achieved by estimating the mean deck height through extracting dominant modes from the estimated deck displacement using the recursive Prony Analysis procedure. The second main contribution is the design of a flight control system with gust-attenuation and rapid position tracking capabilities. A feedback-feedforward controller has been devised for height stabilization in a windy environment based on the construction of an effective gust estimator. Flight tests have been conducted to verify its performance, and they demonstrate improved gust-attenuation capability in the RUAV. The proposed feedback-feedforward controller can dynamically and synchronously compensate for the gust effect. In addition, a nonlinear H1 controller has been designed for horizontal position tracking which shows rapid position tracking performance and gust-attenuation capability when gusts occur. This thesis also contains a description of technical contributions necessary for a real-time evaluation of the landing system. A high-infedlity simulation framework has been developed with the goal of minimizing the number of iterations required for theoretical analysis, simulation verification and flight validation. The real-time performance of the landing system is assessed in simulations using the C-code, which can be easily transferred to the autopilot for flight tests. All the subsystems are parameterized and can be extended to different RUAV platforms. The integration of helicopter flight dynamics, flapping dynamics, ship motion, gust effect, the flight control system and servo dynamics justifies the reliability of the simulation results. Also, practical constraints are imposed on the simulation to check the robustness of the flight control system. The feasibility of the landing procedure is confimed for the Vario helicopter using real-time ship motion data