Enhancement of the Tracking Performance for Robot Manipulator by Using the Feed-forward Scheme and Reasonable Switching Mechanism

Robot manipulator has become an exciting topic for many researchers during several decades. They have investigated the advanced algorithms such as sliding mode control, neural network, or genetic scheme to implement these developments. However, they lacked the integration of these algorithms to explore many potential expansions. Simultaneously, the complicated system requires a lot of computational costs, which is not always supported. Therefore, this paper presents a novel design of switching mechanisms to control the robot manipulator. This investigation is expected to achieve superior performance by flexibly adjusting various strategies for better selection. The Proportional-Integral-Derivative (PID) scheme is well-known, easy to implement, and ensures rapid computation while it might not have much control effect. The advanced interval type-2 fuzzy sliding mode control properly deals with nonlinear factors and disturbances. Consequently, the PID scheme is switched when the tracking error is less than the threshold or is far from the target. Otherwise, the interval type-2 fuzzy sliding mode control scheme is activated to cope with unknown factors. The main contributions of this paper are (i) the recommendation of a suitable switching mechanism to drive the robot manipulator, (ii) the successful integration of the interval type-2 fuzzy sliding mode control to track the desired trajectory, and (iii) the launching of several tests to validate the proposed controller with robot model. From these achievements, it would be stated that the proposed approach is effective in tracking performance, robust in disturbance-rejection, and feasible in practical implementation

Model Predictive Control of Blood Pressure and Urine Production Rate for a Physiological Patient Model

The research proposes the design of a model predictive control (MPC) for automatic drug dosing to regulate high blood pressure and urine production rate in an elderly patient. Combining hydrochlorothiazide and oxybutynin is commonly used for regulation of blood pressure in elderly patients. The patient’s model tries to captures the responses to the drugs as the blood pressure and urine production rates attains their various set-points. Hence, this research aims at improving the control scheme which ensured that these two physiological variables are regulated. Simulation was done in MATLAB/Simulink environment with the use of MPC Toolbox, and the controlled variables were constrained to operate at 80mmHg for blood pressure and between 24-49 ml/kg/hr for urine production rate respectively while the manipulated variables remained unconstrained. From the simulation results, the MPC controller achieved good set-point tracking and disturbance rejection, which is an indication of a healthy level of regulation within acceptable tolerances

Automatic Control Strategies of Mean Arterial Pressure and Cardiac Output. MIMO controllers, PID, internal model control, adaptive model reference, and neural nets are developed to regulate mean arterial pressure and cardiac output using the drugs sodium Nitroprusside and dopamine

High blood pressure, also called hypertension is one of the most common worldwide diseases afflicting humans and is a major risk factor for stroke, myocardial infarction, vascular disease, and chronic kidney disease. If blood pressure is controlled and oscillations in the hemodynamic variables are reduced, patients experience fewer complications after surgery. In clinical practice, this is usually achieved using manual drug delivery. Given that different patients have different sensitivity and reaction time to drugs, determining manually the right drug infusion rates may be difficult. This is a problem where automatic drug delivery can provide a solution, especially if it is designed to adapt to variations in the patient’s conditions. This research work presents an investigation into the development of abnormal blood pressure (hypertension) controllers for postoperative patients. Control of the drugs infusion rates is used to simultaneously regulate the hemodynamic variables such as the Mean Arterial Pressure (MAP) and the Cardiac Output (CO) at the desired level. The implementation of optimal control system is very essential to improve the quality of patient care and also to reduce the workload of healthcare staff and costs. Many researchers have conducted studies earlier on modelling and/or control of abnormal blood pressure for postoperative patients. However, there are still many concerns about smooth transition of blood pressure without any side effect. The blood pressure is classified in two categories: high blood pressure (Hypertension) and low blood pressure (Hypotension). The hypertension often occurred after cardiac surgery, and the hypotension occurred during cardiac surgery. To achieve the optimal control solution for these abnormal blood pressures, many methods are proposed, one of the common methods is infusing the drug related to blood pressure to maintain it at the desired level. There are several kinds of vasodilating drugs such as Sodium Nitroprusside (SNP), Dopamine (DPM), Nitro-glycerine (NTG), and so on, which can be used to treat postoperative patients, also used for hypertensive emergencies to keep the blood pressure at safety level. A comparative performance of two types of algorithms has been presented in chapter four. These include the Internal Model Control (IMC), and Proportional-Integral-Derivative (PID) controller. The resulting controllers are implemented, tested and verified for three sensitivity patient response. SNP is used for all three patients’ situation in order to reduce the pressure smoothly and maintain it at the desire level. A Genetic Algorithms (GAs) optimization technique has been implemented to optimise the controllers’ parameters. A set of experiments are presented to demonstrate the merits and capabilities of the control algorithms. The simulation results in chapter four have demonstrated that the performance criteria are satisfied with the IMC, and PID controllers. On the other hand, the settling time for the PID control of all three patients’ response is shorter than the settling time with IMC controller. Using multiple interacting drugs to control both the MAP and CO of patients with different sensitivity to drugs is a challenging task. A Multivariable Model Reference Adaptive Control (MMRAC) algorithm is developed using a two-input, two-output patient model. Because of the difference in patient’s sensitivity to the drug, and in order to cover the wide ranges of patients, Model Reference Adaptive Control (MRAC) has been implemented to obtain the optimal infusion rates of DPM and SNP. This is developed in chapters five and six. Computer simulations were carried out to investigate the performance of this controller. The results show that the proposed adaptive scheme is robust with respect to disturbances and variations in model parameters, the simulation results have demonstrated that this algorithm cannot cover the wide range of patient’s sensitivity to drugs, due to that shortcoming, a PID controller using a Neural Network that tunes the controller parameters was designed and implemented. The parameters of the PID controller were optimised offline using Matlab genetic algorithm. The proposed Neuro-PID controller has been tested and validated to demonstrate its merits and capabilities compared to the existing approaches to cover wide range of patients.Libyan Ministry of Higher Education scholarshi

An open source patient simulator for design and evaluation of computer based multiple drug dosing control for anesthetic and hemodynamic variables

We are witnessing a notable rise in the translational use of information technology and control systems engineering tools in clinical practice. This paper empowers the computer based drug dosing optimization of general anesthesia management by means of multiple variables for patient state stabilization. The patient simulator platform is designed through an interdisciplinary combination of medical, clinical practice and systems engineering expertise gathered in the last decades by our team. The result is an open source patient simulator in Matlab/Simulink from Mathworks(R). Simulator features include complex synergic and antagonistic interaction aspects between general anesthesia and hemodynamic stabilization variables. The anesthetic system includes the hypnosis, analgesia and neuromuscular blockade states, while the hemodynamic system includes the cardiac output and mean arterial pressure. Nociceptor stimulation is also described and acts as a disturbance together with predefined surgery profiles from a translation into signal form of most commonly encountered events in clinical practice. A broad population set of pharmacokinetic and pharmacodynamic (PKPD) variables are available for the user to describe both intra- and inter-patient variability. This simulator has some unique features, such as: i) additional bolus administration from anesthesiologist, ii) variable time-delays introduced by data window averaging when poor signal quality is detected, iii) drug trapping from heterogeneous tissue diffusion in high body mass index patients. We successfully reproduced the clinical expected effects of various drugs interacting among the anesthetic and hemodynamic states. Our work is uniquely defined in current state of the art and first of its kind for this application of dose management problem in anesthesia. This simulator provides the research community with accessible tools to allow a systematic design, evaluation and comparison of various control algorithms for multi-drug dosing optimization objectives in anesthesia

Credibility Evidence for Computational Patient Models Used in the Development of Physiological Closed-Loop Controlled Devices for Critical Care Medicine

Physiological closed-loop controlled medical devices automatically adjust therapy delivered to a patient to adjust a measured physiological variable. In critical care scenarios, these types of devices could automate, for example, fluid resuscitation, drug delivery, mechanical ventilation, and/or anesthesia and sedation. Evidence from simulations using computational models of physiological systems can play a crucial role in the development of physiological closed-loop controlled devices; but the utility of this evidence will depend on the credibility of the computational model used. Computational models of physiological systems can be complex with numerous non-linearities, time-varying properties, and unknown parameters, which leads to challenges in model assessment. Given the wide range of potential uses of computational patient models in the design and evaluation of physiological closed-loop controlled systems, and the varying risks associated with the diverse uses, the specific model as well as the necessary evidence to make a model credible for a use case may vary. In this review, we examine the various uses of computational patient models in the design and evaluation of critical care physiological closed-loop controlled systems (e.g., hemodynamic stability, mechanical ventilation, anesthetic delivery) as well as the types of evidence (e.g., verification, validation, and uncertainty quantification activities) presented to support the model for that use. We then examine and discuss how a credibility assessment framework (American Society of Mechanical Engineers Verification and Validation Subcommittee, V&V 40 Verification and Validation in Computational Modeling of Medical Devices) for medical devices can be applied to computational patient models used to test physiological closed-loop controlled systems

Closed-loop control of anesthesia : survey on actual trends, challenges and perspectives

Automation empowers self-sustainable adaptive processes and personalized services in many industries. The implementation of the integrated healthcare paradigm built on Health 4.0 is expected to transform any area in medicine due to the lightning-speed advances in control, robotics, artificial intelligence, sensors etc. The two objectives of this article, as addressed to different entities, are: i) to raise awareness throughout the anesthesiologists about the usefulness of integrating automation and data exchange in their clinical practice for providing increased attention to alarming situations, ii) to provide the actualized insights of drug-delivery research in order to create an opening horizon towards precision medicine with significantly improved human outcomes. This article presents a concise overview on the recent evolution of closed-loop anesthesia delivery control systems by means of control strategies, depth of anesthesia monitors, patient modelling, safety systems, and validation in clinical trials. For decades, anesthesia control has been in the midst of transformative changes, going from simple controllers to integrative strategies of two or more components, but not achieving yet the breakthrough of an integrated system. However, the scientific advances that happen at high speed need a modern review to identify the current technological gaps, societal implications, and implementation barriers. This article provides a good basis for control research in clinical anesthesia to endorse new challenges for intelligent systems towards individualized patient care. At this connection point of clinical and engineering frameworks through (semi-) automation, the following can be granted: patient safety, economical efficiency, and clinicians' efficacy

Advanced Signal Processing and Control in Anaesthesia

This thesis comprises three major stages: classification of depth of anaesthesia (DOA); modelling a typical patient’s behaviour during a surgical procedure; and control of DOAwith simultaneous administration of propofol and remifentanil. Clinical data gathered in theoperating theatre was used in this project. Multiresolution wavelet analysis was used to extract meaningful features from the auditory evoked potentials (AEP). These features were classified into different DOA levels using a fuzzy relational classifier (FRC). The FRC uses fuzzy clustering and fuzzy relational composition. The FRC had a good performance and was able to distinguish between the DOA levels. A hybrid patient model was developed for the induction and maintenance phase of anaesthesia. An adaptive network-based fuzzy inference system was used to adapt Takagi-Sugeno-Kang (TSK) fuzzy models relating systolic arterial pressure (SAP), heart rate (HR), and the wavelet extracted AEP features with the effect concentrations of propofol and remifentanil. The effect of surgical stimuli on SAP and HR, and the analgesic properties of remifentanil were described by Mamdani fuzzy models, constructed with anaesthetist cooperation. The model proved to be adequate, reflecting the effect of drugs and surgical stimuli. A multivariable fuzzy controller was developed for the simultaneous administration of propofol and remifentanil. The controller is based on linguistic rules that interact with three decision tables, one of which represents a fuzzy PI controller. The infusion rates of the two drugs are determined according to the DOA level and surgical stimulus. Remifentanil is titrated according to the required analgesia level and its synergistic interaction with propofol. The controller was able to adequately achieve and maintain the target DOA level, under different conditions. Overall, it was possible to model the interaction between propofol and remifentanil, and to successfully use this model to develop a closed-loop system in anaesthesia

User-centered visual analysis using a hybrid reasoning architecture for intensive care units

One problem pertaining to Intensive Care Unit information systems is that, in some cases, a very dense display of data can result. To ensure the overview and readability of the increasing volumes of data, some special features are required (e.g., data prioritization, clustering, and selection mechanisms) with the application of analytical methods (e.g., temporal data abstraction, principal component analysis, and detection of events). This paper addresses the problem of improving the integration of the visual and analytical methods applied to medical monitoring systems. We present a knowledge- and machine learning-based approach to support the knowledge discovery process with appropriate analytical and visual methods. Its potential benefit to the development of user interfaces for intelligent monitors that can assist with the detection and explanation of new, potentially threatening medical events. The proposed hybrid reasoning architecture provides an interactive graphical user interface to adjust the parameters of the analytical methods based on the users' task at hand. The action sequences performed on the graphical user interface by the user are consolidated in a dynamic knowledge base with specific hybrid reasoning that integrates symbolic and connectionist approaches. These sequences of expert knowledge acquisition can be very efficient for making easier knowledge emergence during a similar experience and positively impact the monitoring of critical situations. The provided graphical user interface incorporating a user-centered visual analysis is exploited to facilitate the natural and effective representation of clinical information for patient care