NONLINEAR ADAPTIVE HEADING CONTROL FOR AN UNDERACTUATED SURFACE VESSEL WITH CONSTRAINED INPUT AND SIDESLIP ANGLE COMPENSATION

In this paper, a nonlinear adaptive heading controller is developed for an underactuated surface vessel with constrained input and sideslip angle compensation. The controller design is accomplished in a framework of backstepping technique. First, to amend the irrationality of the traditional definition of the desired heading, the desired heading is compensated by the sideslip angle. Considering the actuator physical constrain, a hyperbolic tangent function and a Nussbaum function are introduced to handle the nonlinear part of control input. The error and the disturbance are estimated and compensated by an adaptive control law. In addition, to avoid the complicated calculation of time derivatives of the virtual control, the command filter is introduced to integrate with the control law. It is analysed by the Lyapunov theory that the closed loop system is guaranteed to be uniformly ultimately bounded stability. Finally, the simulation studies illustrate the effectiveness of the proposed control method

Adaptive backstepping control for ship nonlinear active fin system based on disturbance observer and neural network

Adaptive backstepping control based on disturbance observer and neural network for ship nonlinear active fin system is proposed. One disturbance observer is given to observe the disturbances of the system, by this way, the response time is shorten and the negative impact of disturbance and uncertain elements of the system is reduced. In addition, radial basic function neural network (RBFNN) is proposed to approach the unknown elements in the ship nonlinear active fin system, therefor the system can obtain good roll reduction effectiveness and overcome the uncertainties of the model, the designed controller can maintain the ship roll angle at desired value. Finally, the simulation results are given for a supply vessel to verify the successfulness of the proposed controller

A Fuzzy Logic-based Cascade Control without Actuator Saturation for the Unmanned Underwater Vehicle Trajectory Tracking

An intelligent control strategy is proposed to eliminate the actuator saturation problem that exists in the trajectory tracking process of unmanned underwater vehicles (UUV). The control strategy consists of two parts: for the kinematic modeling part, a fuzzy logic-refined backstepping control is developed to achieve control velocities within acceptable ranges and errors of small fluctuations; on the basis of the velocities deducted by the improved kinematic control, the sliding mode control (SMC) is introduced in the dynamic modeling to obtain corresponding torques and forces that should be applied to the vehicle body. With the control velocities computed by the kinematic model and applied forces derived by the dynamic model, the robustness and accuracy of the UUV trajectory without actuator saturation can be achieved

The optimal control system of the ship based on the linear quadratic regular algorithm

In this paper, the authors propose an optimal controller for the ship motion. Firstly, the model and dynamic equations of the ship motion are presented. Based on the model of the ship motion, the authors build the linear quadratic regular algorithm-based control system of ship motion to minimize the error between the desired trajectory and the response trajectory. The task of the controller is to control the trajectory of the ship to coincide with the desired trajectory. The ship model and controller are built to investigate the system quality through Matlab-Simulink software. The results show that the quality of the hold control system is very high. The trajectory of a ship always follows the desired trajectory with very small errors

Nonlinear steering control under input magnitude and rate constraints with exponential convergence

A ship steering control is designed for a nonlinear maneuvering model whose rudder manipulation is constrained in both magnitude and rate. In our method, the tracking problem of the target heading angle with input constraints is converted into the tracking problem for a strict-feedback system without any input constraints. To derive this system, hyperbolic tangent ($\tanh$) function and auxiliary variables are introduced to deal with the input constraints. Furthermore, using the feature of the derivative of $\tanh$ function, auxiliary systems are successfully derived in the strict-feedback form. The backstepping method is utilized to construct the feedback control law for the resulting cascade system. The proposed steering control is verified in numerical experiments, and the result shows that the tracking of the target heading angle is successful using the proposed control law.Comment: 12 pages, 6 figures, a preprint submitted to the Journal of Marine Science and Technolog

Automatic Control and Routing of Marine Vessels

Due to the intensive development of the global economy, many problems are constantly emerging connected to the safety of ships’ motion in the context of increasing marine traffic. These problems seem to be especially significant for the further development of marine transportation services, with the need to considerably increase their efficiency and reliability. One of the most commonly used approaches to ensuring safety and efficiency is the wide implementation of various automated systems for guidance and control, including such popular systems as marine autopilots, dynamic positioning systems, speed control systems, automatic routing installations, etc. This Special Issue focuses on various problems related to the analysis, design, modelling, and operation of the aforementioned systems. It covers such actual problems as tracking control, path following control, ship weather routing, course keeping control, control of autonomous underwater vehicles, ship collision avoidance. These problems are investigated using methods such as neural networks, sliding mode control, genetic algorithms, L2-gain approach, optimal damping concept, fuzzy logic and others. This Special Issue is intended to present and discuss significant contemporary problems in the areas of automatic control and the routing of marine vessels

Review of dynamic positioning control in maritime microgrid systems

For many offshore activities, including offshore oil and gas exploration and offshore wind farm construction, it is essential to keep the position and heading of the vessel stable. The dynamic positioning system is a progressive technology, which is extensively used in shipping and other maritime structures. To maintain the vessels or platforms from displacement, its thrusters are used automatically to control and stabilize the position and heading of vessels in sea state disturbances. The theory of dynamic positioning has been studied and developed in terms of control techniques to achieve greater accuracy and reduce ship movement caused by environmental disturbance for more than 30 years. This paper reviews the control strategies and architecture of the DPS in marine vessels. In addition, it suggests possible control principles and makes a comparison between the advantages and disadvantages of existing literature. Some details for future research on DP control challenges are discussed in this paper

MODEL REFERENCE ADAPTIVE CONTROL-BASED GENETIC ALGORITHM DESIGN FOR HEADING SHIP MOTION

In this paper, the heading control of a large ship is enhanced with a specific end goal, to check the unwanted impact of the waves on the actuator framework. The Nomoto model is investigated to describe the ship’s guiding progression. First and second order models are considered here. The viability of the models is examined based on the principal properties of the Nomoto model. Different controllers are proposed, these are Proportional Integral Derivative (PID), Linear Quadratic Regulator (LQR) and Model Reference Adaptive Control Genetic optimization Algorithm (MRAC-GA) for a ship heading control. The results show that the MRAC-GA controller provides the best results to satisfy the design requirements. The Matlab/Simulink tool is utilized to demonstrate the proposed arrangement in the control loop