Delay-Guaranteed Admission Control for LAA Coexisting with WiFi

© 2012 IEEE. Licensed-assisted-access (LAA) is used to extend the LTE link into the unlicensed band. How to guarantee the quality-of-service (QoS) for LTE devices in the unlicensed band is a challenging problem due to the listen-before-talk contention access in 5-GHz unlicensed bands. In this letter, we quantitatively analyze the medium access control delay for tagged LAA eNBs and propose a delay-guaranteed admission control scheme. We consider the freezing time of busy slots caused by collision or successful transmission, and introduce the exponential backoff mechanism for delay analysis. Validated by simulation results, our method provides important insights into the system admission performance and fairness of access

On Modeling and Optimizing LTE/Wi-Fi Coexistence with Prioritized Traffic Classes

© 2018 IEEE. The dramatic growth in demand for mobile data service has prompted mobile network operators (MNOs) to explore new spectrum resources in unlicensed bands. MNOs have been recently allowed to extend LTE-based service called LTE-LAA over 5 GHz U-NII bands, currently occupied by Wi-Fi. To support applications with diverse QoS requirements, both LTE and Wi-Fi technologies introduce multiple priority classes with different channel contention parameters for accessing unlicensed bands. How these different priority classes affect the interplay between coexisting LTE and Wi-Fi technologies is still relatively under explored. In this paper, we develop a simple and efficient framework that helps MNOs assess the fair coexistence between MNOs and Wi-Fi operators with prioritized channel access under multi-channel setting. We derive an approximated close-form solution for each MNO to pre-evaluate the probability of successful transmission (PST), average contention delay, and average throughput when adopting different priority classes to serve different traffics. MNOs and Wi-Fi operators can fit our model using measurements collected offline and/or online, and use it to further optimize their systems' throughput and latency. Our results reveal that PSTs computed with our approximated closed-form model approach those collected from system-level simulations with around 95% accuracy under scenarios of dense network deployment density and high traffic intensity

Modelling and Analysis of Wi-Fi and LAA Coexistence with Priority Classes

The Licensed Assisted Access (LAA) is shown asa required technology to avoid overcrowding of the licensedbands by the increasing cellular traffic. Proposed by 3GPP,LAA uses a Listen Before Talk (LBT) and backoff mechanismsimilar to Wi-Fi. While many mathematical models have beenproposed to study the problem of the coexistence of LAAand Wi-Fi systems, few have tackled the problem of QoSprovisioning, and in particular analysed the behaviour of thevarious classes of priority available in Wi-Fi and LAA. Thispaper presents a new mathematical model to investigate theperformance of different priority classes in coexisting Wi-Fi andLAA networks. Using Discrete Time Markov Chains, we modelthe saturation throughput of all eight priority classes used byWi-Fi and LAA. The numerical results show that with the 3GPPproposed parameters, a fair coexistence between Wi-Fi and LAAcannot be achieved. Wi-Fi users in particular suffer a significantdegradation of their performance caused by the collision withLAA transmissions which has a longer duration compared toWi-Fi transmissions

Towards Efficient and Enhanced Wireless Coexistence in the Unlicensed Spectrum

The 3rd Generation Partnership Project (3GPP) is developing the fifth generation (5G) of wireless broadband technology and has identified the unlicensed spectrum as a principal item on the plan of action. Listen-Before-Talk (LBT) has been recognized as the starting development point for the channel access scheme of future 5G New Radio-Unlicensed (NR-U) networks. Recent technical reports suggest that all sub-7 GHz unlicensed spectrum is targeted for 5G NR-U operation, including the 2.4 GHz Industrial, Scientific, and Medical (ISM) band. Literature is inundated with research on Wi-Fi and LBT-based long-term evolution License-Assisted Access (LTE-LAA) wireless coexistence analysis. While a treasure trove of radio spectrum has been approved for license-exempt use in the 6 GHz band, industry and standard organizations must make sure it is well utilized by enhancing their coexistence schemes. A proper assessment of the homogeneous LBT deployment is imperative under the new use cases and regulatory circumstances. The work presented herein aimed to fill the gap and underline the importance of improving channel access mechanisms in next-generation wireless systems. The research in this dissertation first analyzed the LBT channel access scheme and analytically evaluated its performance in terms of a metrics set, such as effective channel utilization, collision probability, mean access delay, and temporal fairness among coexisting nodes. Outcomes of the developed analytical model revealed inefficiencies in various cases. For example, high priority classes generally hinder overall effective channel utilization, exhibit a high collision rate, and incur long latencies compared to lower priorities; and low priority classes sustain longer delays in class-heterogeneous scenarios. The developed framework was then utilized to investigate wireless coexistence in a 5G-enabled intensive care unit, employing remote patient monitoring over 5G NR-U. A modified LBT scheme is then proposed in this work to enhance overall channel efficiency in homogeneous LBT deployments by reducing the collision probability among coexisting stations based on the analytical investigation of the LBT mechanism. It is expected that low-power, narrowband frequency hoppers will be allowed to operate in the 6 GHz spectrum based on recent European Communications Committee (ECC) mandates, which raises speculation around coexistence with incumbent radio access technologies (RATs). To address the potential operation of cellular LBT in the 2.4 GHz and frequency hopping systems in the 5- and 6-GHz bands, the coexistence of Bluetooth Low Energy (BLE) 5 and LBT was investigated empirically in an anechoic chamber. The mutual impact was explored by means of throughput, packet error rate, and interframe delays. Empirical evaluation results demonstrated how BLE throughput dropped as the intended-to-unintended signal ratio decreased and the way in which LBT classes exhibited a diminishing effect as the class priority descended. Long Range BLE physical layer (PHY) was found to sustain longer gap times (i.e., delay) than the other two PHYs; however, the LR PHY showed less susceptibility to interference. Results also demonstrated that low data rate BLE PHYs hindered LBT throughput performance since they correspond to longer airtime durations

Simultaneous Transmission Opportunities for LTE-LAA Co existing with WiFi in Unlicensed Spectrum from Exploiting Spatial Domain

In this thesis, we first give an intensive review on the background of LTE-LAA technology, the research status of LTE-LAA and WiFi co-existence mechanisms and 3GPP Rel. 13 standardization on LTELAA. The existing co-existence designs focus on the time-domain, frequency-domain and power-domain to achieve fairness between two systems. Simultaneous transmissions are avoided to reduce collision probability. However, by exploiting the spatial domain, we discover the possibility of simultaneous LTE-LAA/WiFi transmission opportunities as long as the interference received at the WiFi receiver is well managed. We first show the feasibility of such simultaneous transmission opportunities considering AP/UE location diversity and various coverage overlap situations between LTE-LAA small cell and WiFi AP. Then, by utilizing multi-antenna beamforming capability, we propose a more practical co-existence scheme combing DoA estimation and null steering technologies. As the lack of direct communication link between LTE-LAA and WiFi systems, we also give our design of information exchange that requires minimal modifications on current WiFi standards and with little to none extra overhead. From the discussions and simulation results, we prove the existence of such simultaneous transmission opportunities that do not bring extra impact on WiFi networks. The channel occupancy time of LTE-LAA can be greatly improved. However, problems and challenges are also identified that require future investigations

Reduced-complexity Digital Predistortion in Flexible Radio Spectrum Access

Wireless communications is nowadays seen as one of the main foundations of technological advancements in, e.g., healthcare, education, agriculture, transportation, computing, personal communications, media, and entertainment. This requires major technological developments and advances at different levels of the wireless communication systems and networks. In particular, it is required to utilize the currently available frequency spectrum in a more and more efficient way, while also adopting new spectral bands. Moreover, it is required that cheaper and smaller electronic components are used to build future wireless communication systems to facilitate increasingly cost-effective solutions. Meanwhile, energy efficiency becomes extremely important in wide scale deployments of the networks both from a running cost point of view, and from an environmental impact point of view. This is the big picture, or the so called ‘bird’s eye view’ of the challenges that are yet to be met in this very interesting and fast developing field of science.The power amplifier (PA) is the most power-hungry component in most RF transmitters. Consequently, its energy efficiency significantly contributes to the overall energy efficiency of the transmitter, and in fact the whole wireless network. Unfortunately, energy efficiency enhancement implies operating the PA closer to its saturation region, which typically results in severe nonlinear distortion that can deteriorate the signal quality and cause interference to neighboring users, both of which negatively impact the system spectral efficiency. Moreover, in flexible spectrum access scenarios, which are essential for improving the spectral efficiency, particular in the form of non-contiguous radio spectrum access, the nonlinear distortion due to the PA becomes even more severe and can significantly impact the overall network performance. For example, in noncontiguous carrier aggregation (CA) in LTE-Advanced, it has been demonstrated that in addition to the classical in-band distortion and regrowth around the main carriers, harmful spurious emission components are generated which can easily violate the spurious emission limits even in the case of user equipment (UE) transmitters.Technological advances in the digital electronics domain have enabled us to approach this problem from a digital signal processing point of view in the form of widely-adopted and researched digital predistortion (DPD) technology. However, when the signal bandwidth gets larger, and flexible or non-contiguous spectrum access is introduced, the complexity of the DPD increases and the power consumed in the digital domain by the DPD itself becomes higher and higher, to the extent that it might be close to, or even surpass, the energy savings achieved from using a more efficient PA. The problem becomes even more challenging at the UE side which has relatively limited computational capabilities and lower transmit power. This dilemma can be resolved by developing novel reduced-complexity DPD solutions in such flexible spectrum access and/or wide bandwidth scenarios while not sacrificing the DPD performance, which is the main topic area that this thesis work contributes to.The first contribution of this thesis is the development of a spur-injection based sub-band DPD structure for spurious emission mitigation in noncontiguous transmission scenarios. A novel and effective learning algorithm is also introduced, for the proposed sub-band DPD, based on the decorrelation principle. Mathematical models of the unwanted emissions are formulated based on realistic PA models with memory, followed by developing an efficient DPD structure for mitigating these emissions with reducedcomplexity in both the DPD main processing and learning paths while providing excellent spurious emission suppression. In the special case when the spurious emissions overlap with the own RX band in frequency division duplexing (FDD) transceivers, a novel subband DPD solution is also developed that uses the main RX for DPD learning without requiring any additional observation RX, thus further reducing the DPD complexity.The second contribution is the development of a novel reduced-complexity concurrent DPD, with a single-feedback receiver path, for carrier aggregation-like scenarios. The proposed solution is based on a simple and flexible DPD structure with decorrelationbased parameter learning. Practical simulations and RF measurements demonstrate that the proposed concurrent DPD provides excellent linearization performance, in terms of in-band error vector magnitude (EVM) and adjacent channel leakage ratio (ACLR), when compared to state-of-the-art concurrent DPD solutions, despite its reduced computational complexity in both the DPD main path processing and parameter learning.The third contribution is the development of a new and novel frequency-optimized DPD solution which can tailor its linearization capabilities to any particular regions of the spectrum. Detailed mathematical expressions of the power spectrum at the PA output as a function of the DPD coefficients are formulated. A Newton-Raphson optimization routine is then utilized to optimize the suppression of unwanted emissions at arbitrary pre-specified frequencies at the PA output. From a complexity reduction perspective, this means that for a given linearization performance at a particular frequency range, an optimized and reduced-complexity DPD can be used.Detailed quantitative complexity analysis, of all the proposed DPD solutions, is performed in this thesis. The complexity and linearization performance are also compared to state-of-the-art DPD solutions in the literature to validate and demonstrate the complexity reduction aspect without sacrificing the linearization performance. Moreover, all the DPD solutions developed in this thesis are tested in practical RF environments using real cellular power amplifiers that are commercially used in the latest wireless communication systems, both at the base station side and at the mobile terminal side. These experiments, along with the strong theoretical foundation of the developed DPD solutions prove that they can be commercially used as such to enhance the performance, energy efficiency, and cost effectiveness of next generation wireless transmitters

Architecture and communication protocol to monitor and control water quality and irrigation in agricultural environments

[ES] La introducción de soluciones tecnológicas en la agricultura permite reducir el uso de recursos y aumentar la producción de los cultivos. Además, la calidad del agua de regadío se puede monitorizar para asegurar la seguridad de los productos para el consumo humano. Sin embargo, la localización remota de la mayoría de los campos presenta un problema para proveer de cobertura inalámbrica a los nodos sensores y actuadores desplegados en los campos y los canales de agua para regadío. El trabajo presentado en esta tesis aborda el problema de habilitar la comunicación inalámbrica entre los dispositivos electrónicos desplegados para la monitorización de la calidad del agua y el campo a través de un protocolo de comunicación y arquitectura heterogéneos. La primera parte de esta tesis introduce los sistemas de agricultura de precisión (PA) y la importancia de la monitorización de la calidad del agua y el campo. Asimismo, las tecnologías que permiten la comunicación inalámbrica en sistemas PA y el uso de soluciones alternativas como el internet de las cosas bajo tierra (IoUT) y los vehículos aéreos no tripulados (UAV) se introducen también. Después, se realiza un análisis en profundidad del estado del arte respecto a los sensores para la monitorización del agua, el campo y las condiciones meteorológicas, así como sobre las tecnologías inalámbricas más empleadas en PA. Además, las tendencias actuales y los desafíos de los sistemas de internet de las cosas (IoT) para regadío, incluyendo las soluciones alternativas introducidas anteriormente, han sido abordados en detalle. A continuación, se presenta la arquitectura propuesta para el sistema, la cual incluye las áreas de interés para las actividades monitorización que incluye las áreas de los canales y el campo. A su vez, la descripción y los algoritmos de operación de los nodos sensores contemplados para cada área son proporcionados. El siguiente capítulo detalla el protocolo de comunicación heterogéneo propuesto, incluyendo los mensajes y alertas del sistema. Adicionalmente, se presenta una nueva topología de árbol para redes híbridas LoRa/WiFi multisalto. Las funcionalidades específicas adicionales concebidas para la arquitectura propuesta están descritas en el siguiente capítulo. Éstas incluyen algoritmos de agregación de datos para la topología propuesta, un esquema de las amenazas de seguridad para los sistemas PA, algoritmos de ahorro de energía y tolerancia a fallos, comunicación bajo tierra para IoUT y el uso de drones para adquisición de datos. Después, los resultados de las simulaciones para las soluciones propuestas anteriormente son presentados. Finalmente, se tratan las pruebas realizadas en entornos reales para el protocolo heterogéneo presentado, las diferentes estrategias de despliegue de los nodos empleados, el consumo energético y la función de cuantificación de fruta. Estas pruebas demuestran la validez de la arquitectura y protocolo de comunicación heterogéneos que se han propuesto.[CA] La introducció de solucions tecnològiques en l'agricultura permet reduir l'ús de recursos i augmentar la producció dels cultius. A més, la qualitat de l'aigua de regadiu es pot monitoritzar per assegurar la qualitat dels productes per al consum humà. No obstant això, la localització remota de la majoria dels camps presenta un problema per a proveir de cobertura sense fils als nodes sensors i actuadors desplegats als camps i els canals d'aigua per a regadiu. El treball presentat en aquesta tesi tracta el problema d'habilitar la comunicació sense fils entre els dispositius electrònics desplegats per a la monitorització de la qualitat de l'aigua i el camp a través d'un protocol de comunicació i arquitectura heterogenis. La primera part d'aquesta tesi introdueix els sistemes d'agricultura de precisió (PA) i la importància de la monitorització de la qualitat de l'aigua i el camp. Així mateix, també s'introdueixen les tecnologies que permeten la comunicació sense fils en sistemes PA i l'ús de solucions alternatives com l'Internet de les coses sota terra (IoUT) i els vehicles aeris no tripulats (UAV). Després, es realitza una anàlisi en profunditat de l'estat de l'art respecte als sensors per a la monitorització de l'aigua, el camp i les condicions meteorològiques, així com sobre les tecnologies sense fils més emprades en PA. S'aborden les tendències actuals i els reptes dels sistemes d'internet de les coses (IoT) per a regadiu, incloent les solucions alternatives introduïdes anteriorment. A continuació, es presenta l'arquitectura proposada per al sistema, on s'inclouen les àrees d'interès per a les activitats monitorització en els canals i el camp. Finalment, es proporciona la descripció i els algoritmes d'operació dels nodes sensors contemplats per a cada àrea. El següent capítol detalla el protocol de comunicació heterogeni proposat, així como el disseny del missatges i alertes que el sistema proposa. A més, es presenta una nova topologia d'arbre per a xarxes híbrides Lora/WiFi multi-salt. Les funcionalitats específiques addicionals concebudes per l'arquitectura proposada estan descrites en el següent capítol. Aquestes inclouen algoritmes d'agregació de dades per a la topologia proposta, un esquema de les alertes de seguretat per als sistemes PA, algoritmes d'estalvi d'energia i tolerància a fallades, comunicació per a IoUT i l'ús de drons per a adquisició de dades. Després, es presenten els resultats de les simulacions per a les solucions proposades. Finalment, es duen a terme les proves en entorns reals per al protocol heterogeni dissenyat. A més s'expliquen les diferents estratègies de desplegament dels nodes empleats, el consum energètic, així com, la funció de quantificació de fruita. Els resultats d'aquetes proves demostren la validesa de l'arquitectura i protocol de comunicació heterogenis propost en aquesta tesi.[EN] The introduction of technological solutions in agriculture allows reducing the use of resources and increasing the production of the crops. Furthermore, the quality of the water for irrigation can be monitored to ensure the safety of the produce for human consumption. However, the remote location of most fields presents a problem for providing wireless coverage to the sensing nodes and actuators deployed on the fields and the irrigation water canals. The work presented in this thesis addresses the problem of enabling wireless communication among the electronic devices deployed for water quality and field monitoring through a heterogeneous communication protocol and architecture. The first part of the dissertation introduces Precision Agriculture (PA) systems and the importance of water quality and field monitoring. In addition, the technologies that enable wireless communication in PA systems and the use of alternative solutions such as Internet of Underground Things (IoUT) and Unmanned Aerial Vehicles (UAV) are introduced as well. Then, an in-depth analysis on the state of the art regarding the sensors for water, field and meteorology monitoring and the most utilized wireless technologies in PA is performed. Furthermore, the current trends and challenges for Internet of Things (IoT) irrigation systems, including the alternate solutions previously introduced, have been discussed in detail. Then, the architecture for the proposed system is presented, which includes the areas of interest for the monitoring activities comprised of the canal and field areas. Moreover, the description and operation algorithms of the sensor nodes contemplated for each area is provided. The next chapter details the proposed heterogeneous communication protocol including the messages and alerts of the system. Additionally, a new tree topology for hybrid LoRa/WiFi multi-hop networks is presented. The specific additional functionalities intended for the proposed architecture are described in the following chapter. It includes data aggregation algorithms for the proposed topology, an overview on the security threats of PA systems, energy-saving and fault-tolerance algorithms, underground communication for IoUT, and the use of drones for data acquisition. Then, the simulation results for the solutions previously proposed are presented. Finally, the tests performed in real environments for the presented heterogeneous protocol, the different deployment strategies for the utilized nodes, the energy consumption, and a functionality for fruit quantification are discussed. These tests demonstrate the validity of the proposed heterogeneous architecture and communication protocol.García García, L. (2021). Architecture and communication protocol to monitor and control water quality and irrigation in agricultural environments [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17422