Disturbance/uncertainty estimation and attenuation techniques in PMSM drives–a survey

This paper gives a comprehensive overview on disturbance/uncertainty estimation and attenuation (DUEA) techniques in permanent magnet synchronous motor (PMSM) drives. Various disturbances and uncertainties in PMSM and also other alternating current (AC) motor drives are first reviewed which shows they have different behaviors and appear in different control loops of the system. The existing DUEA and other relevant control methods in handling disturbances and uncertainties widely used in PMSM drives, and their latest developments are then discussed and summarized. It also provides in-depth analysis of the relationship between these advanced control methods in the context of PMSM systems. When dealing with uncertainties,it is shown that DUEA has a different but complementary mechanism to widely used robust control and adaptive control. The similarities and differences in disturbance attenuation of DUEA and other promising methods such as internal model control and output regulation theory have been analyzed in detail. The wide applications of these methods in different AC motor drives (in particular in PMSM drives) are categorized and summarized. Finally the paper ends with the discussion on future directions in this area

Parameter identification and model based control of direct drive robots

Imperial Users onl

Position control of electro-hydraulic actuator system using fuzzy logic controller optimized by particle swarm optimization

The position control system of an electro-hydraulic actuator system (EHAS) is investigated in this paper. The EHAS is developed by taking into consideration the nonlinearities of the system: the friction and the internal leakage. A variable load that simulates a realistic load in robotic excavator is taken as the trajectory reference. A method of control strategy that is implemented by employing a fuzzy logic controller (FLC) whose parameters are optimized using particle swarm optimization (PSO) is proposed. The scaling factors of the fuzzy inference system are tuned to obtain the optimal values which yield the best system performance. The simulation results show that the FLC is able to track the trajectory reference accurately for a range of values of orifice opening. Beyond that range, the orifice opening may introduce chattering, which the FLC alone is not sufficient to overcome. The PSO optimized FLC can reduce the chattering significantly. This result justifies the implementation of the proposed method in position control of EHAS

Multi-axial real-time hybrid simulation framework for testing nonlinear structure systems with multiple boundary interfaces

Hybrid simulation is a widely accepted laboratory testing approach that partitions a proposed structure into numerical and physical substructures, for a space- and cost-effective testing method. Structural elements that are expected to remain in the linear elastic range are usually modeled numerically, while computationally intractable nonlinear elements are tested physically. The loads and conditions at the boundaries between the numerical and physical substructures are imposed by servo-hydraulic actuators, with the responses measured by load cells and displacement transducers. Traditionally, these actuators impose boundary condition displacements at slow speeds, while damping and inertial components for the physical specimen are numerically calculated. This slow application of the boundary conditions neglects the rate-dependent behavior of the physical specimen. Real-time hybrid simulation (RTHS) is an alternative to slow speed hybrid simulation approach, where the responses of the numerical substructure are calculated and imposed on the physical substructure at real-world natural hazard excitation speeds. Damping, inertia, and rate-dependent material effects are incorporated in the physical substructure as a result of real-time testing. For a general substructure, the boundary interface has six degrees-of-freedom (DOF); therefore, an actuation system that can apply multi-axial loads is required. In these experiments, the boundary conditions at the interface between the physical and numerical substructures are imposed by two or more actuators. Significant dynamic coupling can be present between the actuators in such setups. Kinematic transformations are required for the operation of each actuator to achieve desired boundary conditions. Furthermore, each actuator possesses inherent dynamics that need appropriate compensation to ensure an accurate and stable operation. Most existing RTHS applications to date have involved the substructuring of the reference structures into numerical and physical components at a single interface with a one-DOF boundary condition and force imposed and measured. Multi-DOF boundary conditions have been explored in a few applications; however a general six-DOF stable implementation has never been achieved. A major research gap in the RTHS domain is the development of a multi-axial RTHS framework capable of handling six DOF boundary conditions and forces, as well as the presence of multiple physical specimens and numerical-to-physical interfaces. In this dissertation, a multi-axial real-time hybrid simulation (maRTHS) framework is developed for realistic nonlinear dynamic assessment of structures under natural hazard excitation. The framework is comprised of numerical and physical substructures, actuator-dynamics compensation, and kinematic transformations between Cartesian and actuator/transducer coordinates. The numerical substructure is compiled on a real-time embedded system, comprised of a microcontroller setup, with onboard memory and processing, that computes the response of finite element models of the structural system, which are then communicated with the hardware setup via the input-output peripherals. The physical substructure is composed of a multi-actuator boundary condition box, loadcells, displacement transducers, and one or more physical specimens. The proposed compensation is a model-based strategy based on the linearized identified models of individual actuators. The concepts of the model-based compensation approach are first validated in a shake table study, and then applied to single and multi-axis RTHS developments. The capabilities of the proposed maRTHS framework are demonstrated via the multi-axial load and boundary condition boxes (LBCBs) at the University of Illinois Urbana-Champaign, via two illustrative examples. First, the maRTHS algorithm including the decoupled controller, and kinematic transformation processes are validated. In this study, a moment frame structure is partitioned into numerical beam-column finite element model, and a physical column with an LBCB boundary condition. This experiment is comprised of six DOFs and excitation is only applied in the plane of the moment frame. Next, the maRTHS framework is subjected to a more sophisticated testing environment involving a multi-span curved bridge structure. In this second example, two LBCBs are utilized for testing of two physical piers, and excitation is applied bi-directionally. Results from the illustrative examples are verified against numerical simulations. The results demonstrate the accuracy and promising nature of the proposed state-of-the-art framework for maRTHS for nonlinear dynamic testing of structural systems using multiple boundary points