200 research outputs found
Side information exploitation, quality control and low complexity implementation for distributed video coding
Distributed video coding (DVC) is a new video coding methodology that shifts the highly complex motion search components from the encoder to the decoder, such a video coder would have a great advantage in encoding speed and it is still able to achieve similar rate-distortion performance as the conventional coding solutions. Applications include wireless video sensor networks, mobile video cameras and wireless video surveillance, etc. Although many progresses have been made in DVC over the past ten years, there is still a gap in RD performance between conventional video coding solutions and DVC. The latest development of DVC is still far from standardization and practical use. The key problems remain in the areas such as accurate and efficient side information generation and refinement, quality control between Wyner-Ziv frames and key frames, correlation noise modelling and decoder complexity, etc.
Under this context, this thesis proposes solutions to improve the state-of-the-art side information refinement schemes, enable consistent quality control over decoded frames during coding process and implement highly efficient DVC codec.
This thesis investigates the impact of reference frames on side information generation and reveals that reference frames have the potential to be better side information than the extensively used interpolated frames. Based on this investigation, we also propose a motion range prediction (MRP) method to exploit reference frames and precisely guide the statistical motion learning process. Extensive simulation results show that choosing reference frames as SI performs competitively, and sometimes even better than interpolated frames. Furthermore, the proposed MRP method is shown to significantly reduce the decoding complexity without degrading any RD performance.
To minimize the block artifacts and achieve consistent improvement in both subjective and objective quality of side information, we propose a novel side information synthesis framework working on pixel granularity. We synthesize the SI at pixel level to minimize the block artifacts and adaptively change the correlation noise model according to the new SI. Furthermore, we have fully implemented a state-of-the-art DVC decoder with the proposed framework using serial and parallel processing technologies to identify bottlenecks and areas to further reduce the decoding complexity, which is another major challenge for future practical DVC system deployments. The performance is evaluated based on the latest transform domain DVC codec and compared with different standard codecs. Extensive experimental results show substantial and consistent rate-distortion gains over standard video codecs and significant speedup over serial implementation.
In order to bring the state-of-the-art DVC one step closer to practical use, we address the problem of distortion variation introduced by typical rate control algorithms, especially in a variable bit rate environment. Simulation results show that the proposed quality control algorithm is capable to meet user defined target distortion and maintain a rather small variation for sequence with slow motion and performs similar to fixed quantization for fast motion sequence at the cost of some RD performance.
Finally, we propose the first implementation of a distributed video encoder on a Texas Instruments TMS320DM6437 digital signal processor. The WZ encoder is
efficiently implemented, using rate adaptive low-density-parity-check accumulative (LDPCA) codes, exploiting the hardware features and optimization techniques to improve the overall performance. Implementation results show that the WZ encoder is able to encode at 134M instruction cycles per QCIF frame on a TMS320DM6437 DSP running at 700MHz. This results in encoder speed 29 times faster than non-optimized encoder implementation. We also implemented a highly efficient DVC decoder using both serial and parallel technology based on a PC-HPC (high performance cluster) architecture, where the encoder is running in a general purpose PC and the decoder is running in a multicore HPC. The experimental results show that the parallelized decoder can achieve about 10 times speedup under various bit-rates and GOP sizes compared to the serial implementation and significant RD gains with regards to the state-of-the-art DISCOVER codec
Research and developments of distributed video coding
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The recent developed Distributed Video Coding (DVC) is typically suitable for the applications such as wireless/wired video sensor network, mobile camera etc. where the traditional video coding standard is not feasible due to the constrained computation at the encoder. With DVC, the computational burden is moved from encoder to decoder. The compression efficiency is achieved via joint decoding at the decoder. The practical application of DVC is referred to Wyner-Ziv video coding (WZ) where the side information is available at the decoder to perform joint decoding. This join decoding inevitably causes a very complex decoder. In current WZ video coding issues, many of them emphasise how to improve the system coding performance but neglect the huge complexity caused at the decoder. The complexity of the decoder has direct influence to the system output. The beginning period of this research targets to optimise the decoder in pixel domain WZ video coding (PDWZ), while still achieves similar compression performance. More specifically, four issues are raised to optimise the input block size, the side information generation, the side information refinement process and the feedback channel respectively.
The transform domain WZ video coding (TDWZ) has distinct superior performance to the normal PDWZ due to the exploitation in spatial direction during the encoding. However, since there is no motion estimation at the encoder in WZ video coding, the temporal correlation is not exploited at all at the encoder in all current WZ video coding issues. In the middle period of this research, the 3D DCT is adopted in the TDWZ to remove redundancy in both spatial and temporal direction thus to provide even higher coding performance. In the next step of this research, the performance of transform domain Distributed Multiview Video Coding (DMVC) is also investigated. Particularly, three types transform domain DMVC frameworks which are transform domain DMVC using TDWZ based 2D DCT, transform domain DMVC using TDWZ based on 3D DCT and transform domain residual DMVC using TDWZ based on 3D DCT are investigated respectively.
One of the important applications of WZ coding principle is error-resilience. There have been several attempts to apply WZ error-resilient coding for current video coding standard e.g. H.264/AVC or MEPG 2. The final stage of this research is the design of WZ error-resilient
scheme for wavelet based video codec. To balance the trade-off between error resilience ability and bandwidth consumption, the proposed scheme emphasises the protection of the Region of Interest (ROI) area. The efficiency of bandwidth utilisation is achieved by mutual efforts of WZ coding and sacrificing the quality of unimportant area. In summary, this research work contributed to achieves several advances in WZ video coding. First of all, it is targeting to build an efficient PDWZ with optimised decoder. Secondly, it aims to build an advanced TDWZ based on 3D DCT, which then is applied into multiview video coding to realise advanced transform domain DMVC. Finally, it aims to design an efficient error-resilient scheme for wavelet video codec, with which the trade-off between bandwidth consumption and error-resilience can be better balanced
Recommended from our members
Research and developments of Dirac video codec
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.In digital video compression, apart from storage, successful transmission of the compressed video
data over the bandwidth limited erroneous channels is another important issue. To enable a video
codec for broadcasting application, it is required to implement the corresponding coding tools (e.g.
error-resilient coding, rate control etc.). They are normally non-normative parts of a video codec and
hence their specifications are not defined in the standard. In Dirac as well, the original codec is
optimized for storage purpose only and so, several non-normative part of the encoding tools are still
required in order to be able to use in other types of application.
Being the "Research and Developments of the Dirac Video Codec" as the research title, phase I of
the project is mainly focused on the error-resilient transmission over a noisy channel. The error-resilient
coding method used here is a simple and low complex coding scheme which provides the
error-resilient transmission of the compressed video bitstream of Dirac video encoder over the packet
erasure wired network. The scheme combines source and channel coding approach where error-resilient
source coding is achieved by data partitioning in the wavelet transformed domain and
channel coding is achieved through the application of either Rate-Compatible Punctured
Convolutional (RCPC) Code or Turbo Code (TC) using un-equal error protection between header plus
MV and data. The scheme is designed mainly for the packet-erasure channel, i.e. targeted for the
Internet broadcasting application.
But, for a bandwidth limited channel, it is still required to limit the amount of bits generated from
the encoder depending on the available bandwidth in addition to the error-resilient coding. So, in the
2nd phase of the project, a rate control algorithm is presented. The algorithm is based upon the Quality
Factor (QF) optimization method where QF of the encoded video is adaptively changing in order to
achieve average bitrate which is constant over each Group of Picture (GOP). A relation between the
bitrate, R and the QF, which is called Rate-QF (R-QF) model is derived in order to estimate the
optimum QF of the current encoding frame for a given target bitrate, R.
In some applications like video conferencing, real-time encoding and decoding with minimum
delay is crucial, but, the ability to do real-time encoding/decoding is largely determined by the
complexity of the encoder/decoder. As we all know that motion estimation process inside the encoder
is the most time consuming stage. So, reducing the complexity of the motion estimation stage will
certainly give one step closer to the real-time application. So, as a partial contribution toward realtime
application, in the final phase of the research, a fast Motion Estimation (ME) strategy is designed
and implemented. It is the combination of modified adaptive search plus semi-hierarchical way of
motion estimation. The same strategy was implemented in both Dirac and H.264 in order to
investigate its performance on different codecs. Together with this fast ME strategy, a method which
is called partial cost function calculation in order to further reduce down the computational load of the
cost function calculation was presented. The calculation is based upon the pre-defined set of patterns
which were chosen in such a way that they have as much maximum coverage as possible over the
whole block.
In summary, this research work has contributed to the error-resilient transmission of compressed
bitstreams of Dirac video encoder over a bandwidth limited error prone channel. In addition to this,
the final phase of the research has partially contributed toward the real-time application of the Dirac
video codec by implementing a fast motion estimation strategy together with partial cost function
calculation idea.BBC R&D and Brunel University
Content-Aware Multimedia Communications
The demands for fast, economic and reliable dissemination of multimedia
information are steadily growing within our society. While people and
economy increasingly rely on communication technologies, engineers still
struggle with their growing complexity.
Complexity in multimedia communication originates from several sources. The
most prominent is the unreliability of packet networks like the Internet.
Recent advances in scheduling and error control mechanisms for streaming
protocols have shown that the quality and robustness of multimedia delivery
can be improved significantly when protocols are aware of the content they
deliver. However, the proposed mechanisms require close cooperation between
transport systems and application layers which increases the overall system
complexity. Current approaches also require expensive metrics and focus on
special encoding formats only. A general and efficient model is missing so
far.
This thesis presents efficient and format-independent solutions to support
cross-layer coordination in system architectures. In particular, the first
contribution of this work is a generic dependency model that enables
transport layers to access content-specific properties of media streams,
such as dependencies between data units and their importance. The second
contribution is the design of a programming model for streaming
communication and its implementation as a middleware architecture. The
programming model hides the complexity of protocol stacks behind simple
programming abstractions, but exposes cross-layer control and monitoring
options to application programmers. For example, our interfaces allow
programmers to choose appropriate failure semantics at design time while
they can refine error protection and visibility of low-level errors at
run-time.
Based on some examples we show how our middleware simplifies the
integration of stream-based communication into large-scale application
architectures. An important result of this work is that despite cross-layer
cooperation, neither application nor transport protocol designers
experience an increase in complexity. Application programmers can even
reuse existing streaming protocols which effectively increases system
robustness.Der Bedarf unsere Gesellschaft nach kostengünstiger und
zuverlässiger
Kommunikation wächst stetig. Während wir uns selbst immer mehr von modernen
Kommunikationstechnologien abhängig machen, müssen die Ingenieure dieser
Technologien sowohl den Bedarf nach schneller Einführung neuer Produkte
befriedigen als auch die wachsende Komplexität der Systeme beherrschen.
Gerade die Übertragung multimedialer Inhalte wie Video und Audiodaten ist
nicht trivial. Einer der prominentesten Gründe dafür ist die
Unzuverlässigkeit heutiger Netzwerke, wie z.B.~dem Internet. Paketverluste
und schwankende Laufzeiten können die Darstellungsqualität massiv
beeinträchtigen. Wie jüngste Entwicklungen im Bereich der
Streaming-Protokolle zeigen, sind jedoch Qualität und Robustheit der
Übertragung effizient kontrollierbar, wenn Streamingprotokolle
Informationen über den Inhalt der transportierten Daten ausnutzen.
Existierende Ansätze, die den Inhalt von Multimediadatenströmen
beschreiben, sind allerdings meist auf einzelne Kompressionsverfahren
spezialisiert und verwenden berechnungsintensive Metriken. Das reduziert
ihren praktischen Nutzen deutlich. Außerdem erfordert der
Informationsaustausch eine enge Kooperation zwischen Applikationen und
Transportschichten. Da allerdings die Schnittstellen aktueller
Systemarchitekturen nicht darauf vorbereitet sind, müssen entweder die
Schnittstellen erweitert oder alternative Architekturkonzepte geschaffen
werden. Die Gefahr beider Varianten ist jedoch, dass sich die Komplexität
eines Systems dadurch weiter erhöhen kann.
Das zentrale Ziel dieser Dissertation ist es deshalb,
schichtenübergreifende Koordination bei gleichzeitiger Reduzierung der
Komplexität zu erreichen. Hier leistet die Arbeit zwei Beträge zum
aktuellen Stand der Forschung. Erstens definiert sie ein universelles
Modell zur Beschreibung von Inhaltsattributen, wie Wichtigkeiten und
Abhängigkeitsbeziehungen innerhalb eines Datenstroms. Transportschichten
können dieses Wissen zur effizienten Fehlerkontrolle verwenden. Zweitens
beschreibt die Arbeit das Noja Programmiermodell für multimediale
Middleware. Noja definiert Abstraktionen zur Übertragung und Kontrolle
multimedialer Ströme, die die Koordination von Streamingprotokollen mit
Applikationen ermöglichen. Zum Beispiel können Programmierer geeignete
Fehlersemantiken und Kommunikationstopologien auswählen und den konkreten
Fehlerschutz dann zur Laufzeit verfeinern und kontrolliere
A reduced reference video quality assessment method for provision as a service over SDN/NFV-enabled networks
139 p.The proliferation of multimedia applications and services has generarted a noteworthy upsurge in network traffic regarding video content and has created the need for trustworthy service quality assessment methods. Currently, predominent position among the technological trends in telecommunication networkds are Network Function Virtualization (NFV), Software Defined Networking (SDN) and 5G mobile networks equipped with small cells. Additionally Video Quality Assessment (VQA) methods are a very useful tool for both content providers and network operators, to understand of how users perceive quality and this study the feasibility of potential services and adapt the network available resources to satisfy the user requirements
A reduced reference video quality assessment method for provision as a service over SDN/NFV-enabled networks
139 p.The proliferation of multimedia applications and services has generarted a noteworthy upsurge in network traffic regarding video content and has created the need for trustworthy service quality assessment methods. Currently, predominent position among the technological trends in telecommunication networkds are Network Function Virtualization (NFV), Software Defined Networking (SDN) and 5G mobile networks equipped with small cells. Additionally Video Quality Assessment (VQA) methods are a very useful tool for both content providers and network operators, to understand of how users perceive quality and this study the feasibility of potential services and adapt the network available resources to satisfy the user requirements
Data Hiding in Digital Video
With the rapid development of digital multimedia technologies, an old method which is called steganography has been sought to be a solution for data hiding applications such as digital watermarking and covert communication. Steganography is the art of secret communication using a cover signal, e.g., video, audio, image etc., whereas the counter-technique, detecting the existence of such as a channel through a statistically trained classifier, is called steganalysis.
The state-of-the art data hiding algorithms utilize features; such as Discrete Cosine Transform (DCT) coefficients, pixel values, motion vectors etc., of the cover signal to convey the message to the receiver side. The goal of embedding algorithm is to maximize the number of bits sent to the decoder side (embedding capacity) with maximum robustness against attacks while keeping the perceptual and statistical distortions (security) low. Data Hiding schemes are characterized by these three conflicting requirements: security against steganalysis, robustness against channel associated and/or intentional distortions, and the capacity in terms of the embedded payload. Depending upon the application it is the designer\u27s task to find an optimum solution amongst them.
The goal of this thesis is to develop a novel data hiding scheme to establish a covert channel satisfying statistical and perceptual invisibility with moderate rate capacity and robustness to combat steganalysis based detection. The idea behind the proposed method is the alteration of Video Object (VO) trajectory coordinates to convey the message to the receiver side by perturbing the centroid coordinates of the VO. Firstly, the VO is selected by the user and tracked through the frames by using a simple region based search strategy and morphological operations. After the trajectory coordinates are obtained, the perturbation of the coordinates implemented through the usage of a non-linear embedding function, such as a polar quantizer where both the magnitude and phase of the motion is used. However, the perturbations made to the motion magnitude and phase were kept small to preserve the semantic meaning of the object motion trajectory.
The proposed method is well suited to the video sequences in which VOs have smooth motion trajectories. Examples of these types could be found in sports videos in which the ball is the focus of attention and exhibits various motion types, e.g., rolling on the ground, flying in the air, being possessed by a player, etc. Different sports video sequences have been tested by using the proposed method. Through the experimental results, it is shown that the proposed method achieved the goal of both statistical and perceptual invisibility with moderate rate embedding capacity under AWGN channel with varying noise variances. This achievement is important as the first step for both active and passive steganalysis is the detection of the existence of covert channel.
This work has multiple contributions in the field of data hiding. Firstly, it is the first example of a data hiding method in which the trajectory of a VO is used. Secondly, this work has contributed towards improving steganographic security by providing new features: the coordinate location and semantic meaning of the object
Design of joint source/channel coders
The need to transmit large amounts of data over a band limited channel has led to the development of various data compression schemes. Many of these schemes function by attempting to remove redundancy from the data stream. An unwanted side effect of this approach is to make the information transfer process more vulnerable to channel noise. Efforts at protecting against errors involve the reinsertion of redundancy and an increase in bandwidth requirements. The papers presented within this document attempt to deal with these problems from a number of different approaches
- …