Integrated Transversal Equalizers in High-Speed Fiber-Optic Systems

Intersymbol interference (ISI) caused by intermodal dispersion in multimode fibers is the major limiting factor in the achievable data rate or transmission distance in high-speed multimode fiber-optic links for local area networks applications. Compared with optical-domain and other electrical-domain dispersion compensation methods, equalization with transversal filters based on distributed circuit techniques presents a cost-effective and low-power solution. The design of integrated distributed transversal equalizers is described in detail with focus on delay lines and gain stages. This seven-tap distributed transversal equalizer prototype has been implemented in a commercial 0.18-µm SiGe BiCMOS process for 10-Gb/s multimode fiber-optic links. A seven-tap distributed transversal equalizer reduces the ISI of a 10-Gb/s signal after 800 m of 50-µm multimode fiber from 5 to 1.38 dB, and improves the bit-error rate from about 10^-5 to less than 10^-12

Performance study of automatic transmit power control (ATPC) in point to point microwave link for rain attenuation problem in Malaysia

Point-to-point microwave system is the backbone link for mobile communication industry as well as for other applications. In tropical region particularly in Malaysia, rain attenuation is the major constraint for implementing microwave system above 10GHz. The extreme of propagation channel environment due to rain has brought to the research and development of an automatic transmit power control (ATPC) in microwave transceiver. ATPC varies the transmit power level in order to maintain the receive signal level (RSL) above the threshold for biterror- rate (BER) desired. This research project will cover three main scope of study. First estimated calculation of rain attenuation on terrestrial point-to-point microwave link based on rain data captured. This will involve the understanding and computational of rain attenuation modeling equation by ITU-R recommendation using the Matlab software. Second is the basic concept and operational of ATPC applied in transceiver module of microwave link. Finally the experimental performance analysis of ATPC on actual microwave link install in Celcom microwave network. The performance will be measured on receive signal level on the actual system with ATPC option enable and disable for a certain period of time with realtime rain faded signa

UTHM water quality classification based on sub index

River or stream at their source is unpolluted, but as water flow downstream, the river or lake is receiving point and non-point pollutant source. Ammoniacal nitrogen (NH3- N) and suspended solids (SS) strongly influences the dynamics of the dissolved oxygen in the water. Studies on monitoring this parameter were conducted for a river or lake but limited to the small man-made lake. This study is initiate to determine the changes in water quality of UTHM watershed as the water flows from upstream to downstream. The monitoring of NH3-N and TSS were monitored at two sampling schemes, 1) at the two-week interval and, 2) at a daily basis followed by the determination of the water quality sub-index particularly SIAN and SISS. The results showed that the two lakes in UTHM watershed were classified as polluted. In conclusion, the remedial action should be implemented to improve the water quality to meet the requirements at least to meet the recreational purpose

Phase only transmit beamforming for spectrum sharing microwave systems

This paper deals with the problem of phase-only transmit beamforming in spectrum sharing microwave systems. In contrast to sub-6 GHz schemes, general microwave systems require a large number of antennas due to its huge path loss. As a consequence, digital beamforming needs a large number of computational resources compared to analog beamforming, which only needs a single radio-frequency chain, results the less computational demanding solution. Analog schemes are usually composed by a phase shifter network whose elements transmit at a certain fixed power so that the system designer shall compute the phase values for each element given a set of directions. This approach leads to non-convex quadratic problems where the traditional semidefinite relaxation fails to deliver satisfactory outcomes. In order to solve this, we propose a nonsmooth method that behaves well in several scenarios. Numerical evaluations in different spectrum sharing scenarios, which show the performance of our method, are provided.Peer ReviewedPostprint (author's final draft