Vision-model-based Real-time Localization of Unmanned Aerial Vehicle for Autonomous Structure Inspection under GPS-denied Environment

UAVs have been widely used in visual inspections of buildings, bridges and other structures. In either outdoor autonomous or semi-autonomous flights missions strong GPS signal is vital for UAV to locate its own positions. However, strong GPS signal is not always available, and it can degrade or fully loss underneath large structures or close to power lines, which can cause serious control issues or even UAV crashes. Such limitations highly restricted the applications of UAV as a routine inspection tool in various domains. In this paper a vision-model-based real-time self-positioning method is proposed to support autonomous aerial inspection without the need of GPS support. Compared to other localization methods that requires additional onboard sensors, the proposed method uses a single camera to continuously estimate the inflight poses of UAV. Each step of the proposed method is discussed in detail, and its performance is tested through an indoor test case.Comment: 8 pages, 5 figures, submitted to i3ce 201

Real-Time RGB-D Camera Pose Estimation in Novel Scenes using a Relocalisation Cascade

Camera pose estimation is an important problem in computer vision. Common techniques either match the current image against keyframes with known poses, directly regress the pose, or establish correspondences between keypoints in the image and points in the scene to estimate the pose. In recent years, regression forests have become a popular alternative to establish such correspondences. They achieve accurate results, but have traditionally needed to be trained offline on the target scene, preventing relocalisation in new environments. Recently, we showed how to circumvent this limitation by adapting a pre-trained forest to a new scene on the fly. The adapted forests achieved relocalisation performance that was on par with that of offline forests, and our approach was able to estimate the camera pose in close to real time. In this paper, we present an extension of this work that achieves significantly better relocalisation performance whilst running fully in real time. To achieve this, we make several changes to the original approach: (i) instead of accepting the camera pose hypothesis without question, we make it possible to score the final few hypotheses using a geometric approach and select the most promising; (ii) we chain several instantiations of our relocaliser together in a cascade, allowing us to try faster but less accurate relocalisation first, only falling back to slower, more accurate relocalisation as necessary; and (iii) we tune the parameters of our cascade to achieve effective overall performance. These changes allow us to significantly improve upon the performance our original state-of-the-art method was able to achieve on the well-known 7-Scenes and Stanford 4 Scenes benchmarks. As additional contributions, we present a way of visualising the internal behaviour of our forests and show how to entirely circumvent the need to pre-train a forest on a generic scene.Comment: Tommaso Cavallari, Stuart Golodetz, Nicholas Lord and Julien Valentin assert joint first authorshi

Keyframe-based monocular SLAM: design, survey, and future directions

Extensive research in the field of monocular SLAM for the past fifteen years has yielded workable systems that found their way into various applications in robotics and augmented reality. Although filter-based monocular SLAM systems were common at some time, the more efficient keyframe-based solutions are becoming the de facto methodology for building a monocular SLAM system. The objective of this paper is threefold: first, the paper serves as a guideline for people seeking to design their own monocular SLAM according to specific environmental constraints. Second, it presents a survey that covers the various keyframe-based monocular SLAM systems in the literature, detailing the components of their implementation, and critically assessing the specific strategies made in each proposed solution. Third, the paper provides insight into the direction of future research in this field, to address the major limitations still facing monocular SLAM; namely, in the issues of illumination changes, initialization, highly dynamic motion, poorly textured scenes, repetitive textures, map maintenance, and failure recovery

Mediating Human-Robot Collaboration through Mixed Reality Cues

abstract: This work presents a communication paradigm, using a context-aware mixed reality approach, for instructing human workers when collaborating with robots. The main objective of this approach is to utilize the physical work environment as a canvas to communicate task-related instructions and robot intentions in the form of visual cues. A vision-based object tracking algorithm is used to precisely determine the pose and state of physical objects in and around the workspace. A projection mapping technique is used to overlay visual cues on tracked objects and the workspace. Simultaneous tracking and projection onto objects enables the system to provide just-in-time instructions for carrying out a procedural task. Additionally, the system can also inform and warn humans about the intentions of the robot and safety of the workspace. It was hypothesized that using this system for executing a human-robot collaborative task will improve the overall performance of the team and provide a positive experience to the human partner. To test this hypothesis, an experiment involving human subjects was conducted and the performance (both objective and subjective) of the presented system was compared with a conventional method based on printed instructions. It was found that projecting visual cues enabled human subjects to collaborate more effectively with the robot and resulted in higher efficiency in completing the task.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Augmented reality in support of Industry 4.0—Implementation challenges and success factors

Industrial augmented reality (AR) is an integral part of Industry 4.0 concepts, as it enables workers to access digital information and overlay that information with the physical world. While not being broadly adopted in some applications, the compound annual growth rate of the industrial AR market is projected to grow rapidly. Hence, it is important to understand the issues arising from implementation of AR in industry. This study identifies critical success factors and challenges for industrial AR implementation projects, based on an industry survey. The broadly used technology, organisation, environment (TOE) framework is used as a theoretical basis for the quantitative part of the questionnaire. A complementary qualitative part is used to underpin and extend the findings. It is found that, while technological aspects are of importance, organisational issues are more relevant for industry, which has not been reflected to the same extent in literature.University of Cambridg

Towards high-accuracy augmented reality GIS for architecture and geo-engineering

L’architecture et la géo-ingénierie sont des domaines où les professionnels doivent prendre des décisions critiques. Ceux-ci requièrent des outils de haute précision pour les assister dans leurs tâches quotidiennes. La Réalité Augmentée (RA) présente un excellent potentiel pour ces professionnels en leur permettant de faciliter l’association des plans 2D/3D représentatifs des ouvrages sur lesquels ils doivent intervenir, avec leur perception de ces ouvrages dans la réalité. Les outils de visualisation s’appuyant sur la RA permettent d’effectuer ce recalage entre modélisation spatiale et réalité dans le champ de vue de l’usager. Cependant, ces systèmes de RA nécessitent des solutions de positionnement en temps réel de très haute précision. Ce n’est pas chose facile, spécialement dans les environnements urbains ou sur les sites de construction. Ce projet propose donc d’investiguer les principaux défis que présente un système de RA haute précision basé sur les panoramas omnidirectionels.Architecture and geo-engineering are application domains where professionals need to take critical decisions. These professionals require high-precision tools to assist them in their daily decision taking process. Augmented Reality (AR) shows great potential to allow easier association between the abstract 2D drawings and 3D models representing infrastructure under reviewing and the actual perception of these objects in the reality. The different visualization tools based on AR allow to overlay the virtual models and the reality in the field of view of the user. However, the architecture and geo-engineering context requires high-accuracy and real-time positioning from these AR systems. This is not a trivial task, especially in urban environments or on construction sites where the surroundings may be crowded and highly dynamic. This project investigates the accuracy requirements of mobile AR GIS as well as the main challenges to address when tackling high-accuracy AR based on omnidirectional panoramas