Context-Aware Handover Policies in HetNets

Next generation cellular systems are expected to entail a wide variety of wireless coverage zones, with cells of different sizes and capacities that can overlap in space and share the transmission resources. In this scenario, which is referred to as Heterogeneous Networks (HetNets), a fundamental challenge is the management of the handover process between macro, femto and pico cells. To limit the number of handovers and the signaling between the cells, it will hence be crucial to manage the user's mobility considering the context parameters, such as cells size, traffic loads, and user velocity. In this paper, we propose a theoretical model to characterize the performance of a mobile user in a HetNet scenario as a function of the user's mobility, the power profile of the neighboring cells, the handover parameters, and the traffic load of the different cells. We propose a Markov-based framework to model the handover process for the mobile user, and derive an optimal context-dependent handover criterion. The mathematical model is validated by means of simulations, comparing the performance of our strategy with conventional handover optimization techniques in different scenarios. Finally, we show the impact of the handover regulation on the users performance and how it is possible to improve the users capacity exploiting context information

Self-optimisation of admission control and handover parameters in LTE

In mobile cellular networks the handover (HO) algorithm is responsible for determining when calls of users that are moving from one cell to another are handed over from the former to the latter. The admission control (AC) algorithm, which is the algorithm that decides whether new (fresh or HO) calls that enter a cell are allowed to the cell or not, often tries to facilitate HO by prioritising HO calls in favour of fresh calls. In this way, a good quality of service (QoS) for calls that are already admitted to the network is pursued. In this paper, the effect of self-optimisation of AC parameters on the HO performance in a long term evolution (LTE) network is studied, both with and without the self-optimisation of HO parameters. Simulation results show that the AC parameter optimisation algorithm considerably improves the HO performance by reducing the amount of calls that are dropped prior to or during HO

A survey of machine learning techniques applied to self organizing cellular networks

In this paper, a survey of the literature of the past fifteen years involving Machine Learning (ML) algorithms applied to self organizing cellular networks is performed. In order for future networks to overcome the current limitations and address the issues of current cellular systems, it is clear that more intelligence needs to be deployed, so that a fully autonomous and flexible network can be enabled. This paper focuses on the learning perspective of Self Organizing Networks (SON) solutions and provides, not only an overview of the most common ML techniques encountered in cellular networks, but also manages to classify each paper in terms of its learning solution, while also giving some examples. The authors also classify each paper in terms of its self-organizing use-case and discuss how each proposed solution performed. In addition, a comparison between the most commonly found ML algorithms in terms of certain SON metrics is performed and general guidelines on when to choose each ML algorithm for each SON function are proposed. Lastly, this work also provides future research directions and new paradigms that the use of more robust and intelligent algorithms, together with data gathered by operators, can bring to the cellular networks domain and fully enable the concept of SON in the near future

Quick Handover in 5G for High Speed Railways and Highways Using Forward Handover and PN Sequence Detection

The cellular users, on high speed railways andhighways, travel at a very high speed and follow a nearly straightpath, in general. Thus, they typically undergo a maximumfrequency of handovers in the cellular environment. This requiresa very fast triggering of the handover. In the existing method ofhandover in 5G cellular communication, for high speed users,neither the decision-making of handover nor the triggering ofhandover is sufficiently fast. This can lead to poor signal qualityand packet losses and in the worst case, radio link failure (RLF)during a handover. This paper proposes a forward handover basedmethod, combined with PN sequence detections, to facilitate aquicker handover for high speed users on railways and highways.The proposed method adds some complexity but can offer asignificant improvement in the overall handover delay. A simplisticsimulation is used to demonstrate the improvement of the proposedmethod

Unnecessary Handover Minimization in Two-Tier Heterogeneous Networks

Ultra-dense deployment of small cells (SC) can be foreseen in 5G network under the coverage area of the macrocell (MC). A mobile user equipment (UE) should be able to discover adjacent SCs to perform the handover (HO). This process can be done by frequent neighbour cell scanning. However, extensive scanning for every SC in a dense deployment scenario is a resource wasting strategy, which results in a power dissipation of the UE battery and also lowers the throughput gain. This also means that a high number of SCs would be available for the UE to HO to. Hence, the probability of unnecessary HO will increase and in turn degrade the UE's quality of service (QoS). This paper aims to minimize unnecessary HOs in two tier heterogeneous network with dense deployment of SCs. In the proposed method, we utilise the actual distance between the UE and the SCs and the UE angle of movement to construct a shortened candidate list which helps in reducing the signal overhead of scanning and the number of unnecessary HOs. UE's movement velocity threshold based on average human walking speed is used to control the HO to the SC. Simulation results show that the proposed algorithm outperformed the conventional HO method with reduced unnecessary HOs and increased throughput for the network particularly for medium to high speed UEs resulting in good UE QoS

LTE-verkon suorituskyvyn parantaminen CDMA2000:sta LTE:hen tehdyn muutoksen jälkeen

CDMA2000 technology has been widely used on 450 MHz band. Recently the equipment availability and improved performance offered by LTE has started driving the operators to migrate their networks from CDMA2000 to LTE. The migration may cause the network performance to be in suboptimal state. This thesis presents four methods to positively influence LTE network performance after CDMA2000 to LTE migration, especially on 450 MHz band. Furthermore, three of the four presented methods are evaluated in a live network. The measured three methods were cyclic prefix length, handover parameter optimization and uplink coordinated multipoint (CoMP) transmission. The objective was to determine the effectiveness of each method. The research methods included field measurements and network KPI collection. The results show that normal cyclic prefix length is enough for LTE450 although the cell radius may be up to 50km. Only special cases exist where cyclic prefix should be extended. Operators should consider solving such problems individually instead of widely implementing extended cyclic prefix. Handover parameter optimization turned out to be an important point of attention after CDMA2000 to LTE migration. It was observed that if the handover parameters are not concerned, significant amount of unnecessary handovers may happen. It was evaluated that about 50% of the handovers in the network were unnecessary in the initial situation. By adjusting the handover parameter values 47,28 % of the handovers per user were removed and no negative effects were detected. Coordinated multipoint transmission has been widely discussed to be an effective way to improve LTE network performance, especially at the cell edges. Many challenges must be overcome before it can be applied to downlink. Also, implementing it to function between cells in different eNBs involve challenges. Thus, only intra-site uplink CoMP transmission was tested. The results show that the performance improvements were significant at the cell edges as theory predicted.CDMA2000 teknologiaa on laajalti käytetty 450 MHz:n taajuusalueella. Viime aikoina LTE:n tarjoamat halvemmat laitteistot ja parempi suorituskyky ovat kannustaneet operaattoreita muuttamaan verkkoaan CDMA2000:sta LTE:hen. Kyseinen muutos saattaa johtaa epäoptimaaliseen tilaan verkon suorituskyvyn kannalta. Tämä työ esittelee neljä menetelmää, joilla voidaan positiivisesti vaikuttaa LTE-verkon suorituskykyyn CDMA2000:ste LTE:hen tehdyn muutoksen jälkeen erityisesti 450 MHz:n taajuusalueella. Kolmea näistä menetelmistä arvioidaan tuotantoverkossa. Nämä kolme menetelmää ovat suojavälin pituus, solunvaihtoparametrien optimointi ja ylälinkin koordinoitu monipistetiedonsiirto. Tavoite oli määrittää kunkin menetelmän vaikutus. Tutkimusmenetelmiin kuului kenttämittaukset ja verkon suorituskykymittareiden analyysi. Tutkimustulosten perusteella voidaan sanoa, että normaali suojaväli on riittävän pitkä LTE450:lle vaikka solujen säde on jopa 50km. Vain erikoistapauksissa tarvitaan pidennettyä suojaväliä. Operaattoreiden tulisi ratkaista tällaiset tapaukset yksilöllisesti sen sijaan, että koko verkossa käytettäisiin pidennettyä suojaväliä. Solunvaihtoparametrien optimointi osoittautui tärkeäksi huomion aiheeksi CDMA2000:sta LTE:hen tehdyn muutoksen jälkeen. Turhia solunvaihtoja saattaa tapahtua merkittäviä määriä, mikäli parametreihin ei kiinnitetä huomiota. Lähtötilanteessa noin 50 % testiverkon solunvaihdoista arvioitiin olevan turhia. Solunvaihtoparametreja muuttamalla 47,28 % solunvaihdoista per käyttäjä saatiin poistettua ilman, että mitään haittavaikutuksia olisi huomattu. Koordinoidun monipistetiedonsiirron on laajalti sanottu olevan tehokas tapa parantaa LTE-verkon suorituskykyä, etenkin solujen reunoilla. Monia haasteita pitää ratkaista, enne kuin sitä voidaan käyttää alalinkin tiedonsiirtoon. Lisäksi sen käyttöön eri tukiasemien solujen välillä liittyy haasteita. Tästä syystä monipistetiedonsiirtoa voitiin testata vain ylälinkin suuntaan ja vain yhden tukiaseman välisten solujen kesken. Tulokset osoittivat, että suorituskyky parani merkittävästi solun reunalla

Performance Modelling and Analysis of a New CoMP-based Handover Scheme for Next Generation Wireless Networks. Performance Modelling and Analysis for the Design and Development of a New Handover Scheme for Cell Edge Users in Next Generation Wireless Networks (NGWNs) Based on the Coordinated Multi-Point (CoMP) Joint Transmission (JT) Technique

Inter-Cell Interference (ICI) will be one of main problems for degrading the performance of future wireless networks at cell edge. This adverse situation will become worst in the presence of dense deployment of micro and macro cells. In this context, the Coordinated Multi-Point (CoMP) technique was introduced to mitigate ICI in Next Generation Wireless Networks (NGWN) and increase their network performance at cell edge. Even though the CoMP technique provides satisfactory solutions of various problems at cell edge, nevertheless existing CoMP handover schemes do not prevent unnecessary handover initialisation decisions and never discuss the drawbacks of CoMP handover technique such as excessive feedback and resource sharing among UEs. In this research, new CoMP-based handover schemes are proposed in order to minimise unnecessary handover decisions at cell edge and determine solution of drawbacks of CoMP technique in conjunction with signal measurements such as Reference Signal Received Power (RSRP) and Received Signal Received Quality (RSRQ). A combination of calculations of RSRP and RSRQ facilitate a credible decision making process of CoMP mode and handover mode at cell edge. Typical numerical experiments indicate that by triggering the CoMP mode along with solutions of drawbacks, the overall network performance is constantly increase as the number of unnecessary handovers is progressively reduced