Performances of conformal and planar arrays

Static and dynamic deformations can have a severe impact on the performance of conformal antennas on aircrafts and other vehicles. Therefore it is essential to study the different deformation and vibration mechanisms and their influence on the antenna's radiation pattern. This presentation gives an overview of different approaches concerning electromagnetic modelling of array antennas and investigations on antenna deformations presented in the scope of TG20

Broadside Pattern Correction Techniques for Conformal Antenna Arrays

Phase compensation techniques based on projection method and convex optimization (phase correction only) for comparing the maximum gain of a phase-compensated conformal antenna array have been discussed. In particular, these techniques are validated with conformal phased array antenna attached to a cylindrical-shaped surface with various radii of curvatures. These phase compensation techniques are used to correct the broadside radiation pattern. It is shown that the maximum broadside gain compensated is still less than the gain of a linear flat array for any surface deformation. This fundamental maximum compensated gain limitations of the phase compensation techniques can be used by a designer to predict the maximum broadside obtainable theoretical gain on a conformal antenna array for a particular deformed surface

Radiation pattern synthesis in conformal antenna arrays using modified convex optimization technique

In this paper, a modified convex optimization technique is used for radiationpattern correction in a cylindrical-shaped conformal microstrip array antenna.The technique uses numerical simulations to optimize the amplitude andphase excitations, with the goal to decrease the Euclidean distance betweenthe desired field pattern and the obtained (simulated/measured) field patternwhile maintaining the main beam direction, null's location, and side lobelevels under control. Two prototypes of 1 4 and 2 4 conformal microstripantenna array deformed from linear/planar structure to the prescribed cylin-drical shape, with different radii of curvature, are studied to demonstrate theperformance of the proposed technique. The proposed convex optimizationmodel when applied to conformal antenna array possesses fast computingspeed and high convergence accuracy for radiation pattern synthesis, whichcan be a valuable tool for engineering applications.Dr. Mohammad Alibakhshikenari acknowledges supportfrom the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under theMarie Sklodowska-Curie grant agreement No. 801538

Main Lobe Control of a Beam Tilting Antenna Array Laid on a Deformable Surface

The projection method (PM) is a simple and low-cost pattern recovery technique that already proved its effectiveness in retrieving the radiation properties of different types of arrays that change shape in time. However, when dealing with deformable beam-tilting arrays, this method requires to compute new compensating phase shifts every time that the main lobe is steered, since these shifts depend on both the deformation geometry and the steering angle. This tight requirement causes additional signal processing and complicates the prediction of the array behavior, especially if the deformation geometry is not a priori known: this can be an issue since the PM is mainly used for simple and low-cost systems. In this letter, we propose a simplification of this technique for beam-tilting arrays that requires only basic signal processing. In fact the phase shifts that we use are the sum of two components: one can be directly extracted from strain sensor data that measure surface deformation and the other one can be precomputed according to basic antenna theory. The effectiveness of our approach has been tested on two antennas: a 4 × 4 array (trough full-wave simulations and measurements) and on an 8 × 8 array (trough full-wave simulations) placed on a doubly wedge-shaped surface with a beam tilt up to 40 degrees

Deployable antenna phase A study

Applications for large deployable antennas were re-examined, flight demonstration objectives were defined, the flight article (antenna) was preliminarily designed, and the flight program and ground development program, including the support equipment, were defined for a proposed space transportation system flight experiment to demonstrate a large (50 to 200 meter) deployable antenna system. Tasks described include: (1) performance requirements analysis; (2) system design and definition; (3) orbital operations analysis; and (4) programmatic analysis

Development and Improvement of Airborne Remote Sensing Radar Platforms

With the recent record ice melt in the Arctic as well as the dramatic changes occurring in the Antarctic, the need and urgency to characterize ice sheets in these regions has become a research thrust of both the NSF and NASA. Airborne remote sensing is the most effective way to collect the necessary data on a large scale with fine resolution. Current models for determining the relationship between the world's great ice sheets and global sea-level are limited by the availability of data on bed topography, glacier volume, internal layers, and basal conditions. This need could be satisfied by equipping long range aircraft with an appropriately sensitive suite of sensors. The goal of this work is to enable two new airborne radar installations for use in cryospheric surveying, and improve these systems as well as future systems by addressing aircraft integration effects on antenna-array performance. An aerodynamic fairing is developed to enable a NASA DC-8 to support a 5-element array for CReSIS's MCoRDS radar, and several structures are also developed to enable a NASA P-3 to support a 15-element MCoRDS array, as well as three other radar antenna-arrays used for cryospheric surveying. Together, these aircraft have flown almost 200 missions and collected 550 TB of unique science data. In addition, a compensation method is developed to improve beamforming and clutter suppression on wing-mounted arrays by mitigating phase center errors due to wing-flexure. This compensation method is applied to the MVDR beamforming algorithm to improve clutter suppression by using element displacement information to apply appropriate phase shifts. The compensation demonstrated an average SINR increase of 5-10 dB. The hardware contributions of this work have substantially contributed to the state-of-the-art for polar remotes sensing, as evidenced by new data sets made available to the science community and widespread use and citation of the data. The investigations of aircraft integration effects on antenna-arrays will improve future data sets by characterizing the performance degradation. The wing-flexure compensation will greatly improve beam formation and clutter suppression. Increased clutter suppression in airborne radars is crucial to improving next generation ice sheet models and sea-level rise predictions

Techniques for the Analysis, Design and Simulation of Periodic Surfaces for Space Communications and Antenna Systems for Electrical Appliances

During the recent years, radio frequency applications for electric appliances have witnessed an huge increase in usage. Large companies as Electrolux Italia expressed the need of relying on electromagnetic simulation tools, in order to aid the designer with accurate models that cancel the necessity of a continuous experimental feedback. The electromagnetic modeling of RF applications has to consider not only the role of the RF components, but also the elements forming the appliance structure. Therfore, an ad-hoc approach for each scenario to be handled has to be followed. In this thesis, a procedure to develop and validate a model for a Wi-Fi connectivity system to be embedded in a smart oven and a wireless system for powering sensing devices is presented. Furthermore, in order to deal with issues that emerged from this analysis, innovative antenna solutions involving adaptive arrays were proposed. The research activity eventually moved to the analysis of periodic surfaces for reflector antenna systems for space communications. A simulation tool based on the spectral domain method of moments was developed. A case study involving a frequency selective surface subrflector was used to experimentally validate the proposed tool