High speed, precision motion strategies for lightweight structures

Research on space telerobotics is summarized. Adaptive control experiments on the Robotic Arm, Large and Flexible (RALF) were preformed and are documented, along with a joint controller design for the Small Articulated Manipulator (SAM), which is mounted on the RALF. A control algorithm is described as a robust decentralized adaptive control based on a bounded uncertainty approach. Dynamic interactions between SAM and RALF are examined. Unstability of the manipulator is studied from the perspective that the inertial forces generated could actually be used to more rapidly damp out the flexible manipulator's vibration. Currently being studied is the modeling of the constrained dynamics of flexible arms

Modelling And Experimental Vibration Control Of A Two-link Three-dimensional Manipulator With Flexible Links

Current industrial and space manipulators are required to achieve higher speeds in a lighter structure without sacrificing payload capabilities. Consequently, undesirable vibration occurs during the motion. By suitable modelling of the manipulator flexibility, advanced control strategies can be formulated to improve the joint tracking performance and reduce the residual vibration of the end-point in the presence of payload uncertainties.;Toward this goal, an experimental two-link, 3D, anthropomorphic manipulator with flexible links was designed and built to be used as a test bed for the verification and refinement of the proposed modelling and control strategies.;The nonlinear equations of motion for the robot were derived using Lagrangian dynamics. The model was verified using experimental modal analysis techniques. Based on experimental results, a simplified nonlinear model, that contains the relevant modes of the system, was derived and subsequently used in controller designs and state estimation.;A conventional Proportional-plus-Derivative (PD) controller that implements joint angles feedback was designed to be used as a baseline controller due to its wide applicability on industrial manipulators.;By measuring the links tip vibration using accelerometers, several adaptive controllers and state observers were designed and implemented successfully on the manipulator, namely, a gain-scheduling linear quadratic regulator, a model reference adaptive controller, an adaptive inverse dynamics controller, a least-squares nonlinear state estimator and a robust sliding observer. The controllers performance and robustness were tested and experimentally verified against the change of the payload.;The control strategies and identification techniques, developed in this thesis, are applicable to a wide range of robot manipulators including industrial manipulators

Experimental investigations of the effects of cutting angle on chattering of a flexible manipulator

When a machine tool is mounted at the tip of a robotic manipulator, the manipulator becomes more flexible (the natural frequencies are lowered). Moreover, for a given flexible manipulator, its compliance will be different depending on feedback gains, configurations, and direction of interest. Here, the compliance of a manipulator is derived analytically, and its magnitude is represented as a compliance ellipsoid. Then, using a two-link flexible manipulator with an abrasive cut off saw, the experimental investigation shows that the chattering varies with the saw cutting angle due to different compliance. The main work is devoted to finding a desirable cutting angle which reduces the chattering

A family of asymptotically stable control laws for flexible robots based on a passivity approach

A general family of asymptotically stabilizing control laws is introduced for a class of nonlinear Hamiltonian systems. The inherent passivity property of this class of systems and the Passivity Theorem are used to show the closed-loop input/output stability which is then related to the internal state space stability through the stabilizability and detectability condition. Applications of these results include fully actuated robots, flexible joint robots, and robots with link flexibility