A wireless sensor networks MAC protocol for real-time applications.

Wireless Sensor Networks (WSN) are designed for data gathering and processing, with particular requirements: low hardware complexity, low energy consumption, special traffic pattern support, scalability, and in some cases, real-time operation. In this paper we present the Virtual TDMA for Sensors (VTS) MAC protocol, which intends to support the previous features, focusing particularly on real-time operation. VTS adaptively creates a TDMA arrangement with a number of timeslots equal to the actual number of nodes in range. Thus, VTS achieves an optimal throughput performance compared to TDMA protocols with fixed size of frame. The frame is set up and maintained by a distributed procedure, which allows sensors to asynchronously join and leave the frame. In addition, duty cycle is increased or decreased in order to keep latency constant below a given deadline. Therefore, a major advantage of VTS is that it guarantees a bounded latency, which allows soft real-time applications.This work has been cofunded by the Economy, Industry and Innovation Council, with the SOLIDMOVIL project (2I04SU044), supported by Fundacion Seneca, from the Region of Murcia with the ARENA Project (00546/PI/04), with the ARPaq project (TEC2004-05622-C04-02/TCM) by the Spanish Research Council and the CSI-RHET project (TEC2005-08068-C04-01/TCM)

Congestion and medium access control in 6LoWPAN WSN

In computer networks, congestion is a condition in which one or more egressinterfaces are offered more packets than are forwarded at any given instant [1]. In wireless sensor networks, congestion can cause a number of problems including packet loss, lower throughput and poor energy efficiency. These problems can potentially result in a reduced deployment lifetime and underperforming applications. Moreover, idle radio listening is a major source of energy consumption therefore low-power wireless devices must keep their radio transceivers off to maximise their battery lifetime. In order to minimise energy consumption and thus maximise the lifetime of wireless sensor networks, the research community has made significant efforts towards power saving medium access control protocols with Radio Duty Cycling. However, careful study of previous work reveals that radio duty cycle schemes are often neglected during the design and evaluation of congestion control algorithms. This thesis argues that the presence (or lack) of radio duty cycle can drastically influence the performance of congestion control mechanisms. To investigate if previous findings regarding congestion control are still applicable in IPv6 over low power wireless personal area and duty cycling networks; some of the most commonly used congestion detection algorithms are evaluated through simulations. The research aims to develop duty cycle aware congestion control schemes for IPv6 over low power wireless personal area networks. The proposed schemes must be able to maximise the networks goodput, while minimising packet loss, energy consumption and packet delay. Two congestion control schemes, namely DCCC6 (Duty Cycle-Aware Congestion Control for 6LoWPAN Networks) and CADC (Congestion Aware Duty Cycle MAC) are proposed to realise this claim. DCCC6 performs congestion detection based on a dynamic buffer. When congestion occurs, parent nodes will inform the nodes contributing to congestion and rates will be readjusted based on a new rate adaptation scheme aiming for local fairness. The child notification procedure is decided by DCCC6 and will be different when the network is duty cycling. When the network is duty cycling the child notification will be made through unicast frames. On the contrary broadcast frames will be used for congestion notification when the network is not duty cycling. Simulation and test-bed experiments have shown that DCCC6 achieved higher goodput and lower packet loss than previous works. Moreover, simulations show that DCCC6 maintained low energy consumption, with average delay times while it achieved a high degree of fairness. CADC, uses a new mechanism for duty cycle adaptation that reacts quickly to changing traffic loads and patterns. CADC is the first dynamic duty cycle pro- tocol implemented in Contiki Operating system (OS) as well as one of the first schemes designed based on the arbitrary traffic characteristics of IPv6 wireless sensor networks. Furthermore, CADC is designed as a stand alone medium access control scheme and thus it can easily be transfered to any wireless sensor network architecture. Additionally, CADC does not require any time synchronisation algorithms to operate at the nodes and does not use any additional packets for the exchange of information between the nodes (For example no overhead). In this research, 10000 simulation experiments and 700 test-bed experiments have been conducted for the evaluation of CADC. These experiments demonstrate that CADC can successfully adapt its cycle based on traffic patterns in every traffic scenario. Moreover, CADC consistently achieved the lowest energy consumption, very low packet delay times and packet loss, while its goodput performance was better than other dynamic duty cycle protocols and similar to the highest goodput observed among static duty cycle configurations

Spectrum-efficient Architecture for Cognitive Wireless Sensor Networks

Projecte realitzat en col.laboració amb el centre Université Libre de BruxellesHoy en día existe la creencia de que en unos pocos años las actuales Redes Inalámbricas de Sensores estarán presentes en muchas aplicaciones. Mientras estas sigan actuando en la banda sin licencia de ISM 2,4GHz, tendrán que coexistir con otras exitosas tecnologías como Wi-Fi o Bluetooth. En consecuencia, resulta obvio asegurar que la banda en cuestión estará superpoblada en un futuro próximo. Sin embargo y gracias a las nuevas técnicas de Radio Cognitiva, que permitirán la aplicación de un eficiente Acceso al Espectro Dinámico, se conseguirá una distribución racional, dentro del espectro disponible en ese momento y lugar, de las comunicaciones inalámbricas que se estén llevando a cabo. Esta actuación permitirá acceder a frecuencias menos pobladas para poder transmitir con menos interferencias e incluso con menos pérdidas de propagación. A lo largo de este trabajo se va a presentar una arquitectura eficiente, espectralmente hablando, para Redes Inalámbricas de Sensores y Cognitivas. Este esquema desarrolla un protocolo de recolección de datos, para una red con topología de árbol, totalmente escalable y con finalidades genéricas. A través de las pruebas realizadas, podemos afirmar que nuestro esquema, sin alterar el ciclo normal de recolección de datos, puede detectar la presencia de otras Redes Inalámbricas de Sensores y, consecuentemente, migrar la red a nueva frecuencia mientras que todas estas operaciones están ocultas al usuario final. También es eficiente a nivel de energía, ya que no se realizan comprobaciones redundantes de la presencia de otras redes. De esta manera, nuestra propuesta asegura un mejor comportamiento en caso de la existencia de una Red Inalámbrica de Sensores externa, sin realizar operaciones complicadas ni añadiendo más tráfico a la red

Real-Time Cross-Layer Routing Protocol for Ad Hoc Wireless Sensor Networks

Reliable and energy efficient routing is a critical issue in Wireless Sensor Networks (WSNs) deployments. Many approaches have been proposed for WSN routing, but sensor field implementations, compared to computer simulations and fully-controlled testbeds, tend to be lacking in the literature and not fully documented. Typically, WSNs provide the ability to gather information cheaply, accurately and reliably over both small and vast physical regions. Unlike other large data network forms, where the ultimate input/output interface is a human being, WSNs are about collecting data from unattended physical environments. Although WSNs are being studied on a global scale, the major current research is still focusing on simulations experiments. In particular for sensor networks, which have to deal with very stringent resource limitations and that are exposed to severe physical conditions, real experiments with real applications are essential. In addition, the effectiveness of simulation studies is severely limited in terms of the difficulty in modeling the complexities of the radio environment, power consumption on sensor devices, and the interactions between the physical, network and application layers. The routing problem in ad hoc WSNs is nontrivial issue because of sensor node failures due to restricted recourses. Thus, the routing protocols of WSNs encounter two conflicting issue: on the one hand, in order to optimise routes, frequent topology updates are required, while on the other hand, frequent topology updates result in imbalanced energy dissipation and higher message overhead. In the literature, such as in (Rahul et al., 2002), (Woo et al., 2003), (TinyOS, 2004), (Gnawali et al., 2009) and (Burri et al., 2007) several authors have presented routing algorithms for WSNs that consider purely one or two metrics at most in attempting to optimise routes while attempting to keep small message overhead and balanced energy dissipation. Recent studies on energy efficient routing in multihop WSNs have shown a great reliance on radio link quality in the path selection process. If sensor nodes along the routing path and closer to the base station advertise a high quality link to forwarding upstream packets, these sensor nodes will experience a faster depletion rate in their residual energy. This results in a topological routing hole or network partitioning as stated and resolved in and (Daabaj 2010). This chapter presents an empirical study on how to improve energy efficiency for reliable multihop communication by developing a real-time cross-layer lifetime-oriented routing protocol and integrating useful routing information from different layers to examine their joint benefit on the lifetime of individual sensor nodes and the entire sensor network. The proposed approach aims to balance the workload and energy usage among relay nodes to achieve balanced energy dissipation, thereby maximizing the functional network lifetime. The obtained experimental results are presented from prototype real-network experiments based on Crossbow’s sensor motes (Crossbow, 2010), i.e., Mica2 low-power wireless sensor platforms (Crossbow, 2010). The distributed real-time routing protocol which is proposed In this chapter aims to face the dynamics of the real world sensor networks and also to discover multiple paths between the base station and source sensor nodes. The proposed routing protocol is compared experimentally with a reliability-oriented collection-tree protocol, i.e., the TinyOS MintRoute protocol (Woo et al., 2003). The experimental results show that our proposed protocol has a higher node energy efficiency, lower control overhead, and fair average delay

Fiabilisation des transmissions dans les réseaux de capteurs sans fils

Over the past decades, we have witnessed a proliferation of potential application domainsfor wireless sensor networks (WSN). A comprehensive number of new services such asenvironment monitoring, target tracking, military surveillance and healthcare applicationshave arisen. These networked sensors are usually deployed randomly and left unattendedto perform their mission properly and efficiently. Meanwhile, sensors have to operate ina constrained environment with functional and operational challenges mainly related toresource limitations (energy supply, scarce computational abilities...) and to the noisyreal world of deployment. This harsh environment can cause packet loss or node failurewhich hamper the network activity. Thus, continuous delivery of data requires reliabledata transmission and adaptability to the dynamic environment. Ensuring network reliabilityis consequently a key concern in WSNs and it is even more important in emergencyapplication such disaster management application where reliable data delivery is the keysuccess factor. The main objective of this thesis is to design a reliable end to end solution for data transmission fulfilling the requirements of the constrained WSNs. We tackle two design issues namely recovery from node failure and packet losses and propose solutions to enhance the network reliability. We start by studying WSNs features with a focus on technical challenges and techniques of reliability in order to identify the open issues. Based on this study, we propose a scalable and distributed approach for network recovery from nodefailures in WSNs called CoMN2. Then, we present a lightweight mechanism for packetloss recovery and route quality awareness in WSNs called AJIA. This protocol exploitsthe overhearing feature characterizing the wireless channels as an implicit acknowledgment(ACK) mechanism. In addition, the protocol allows for an adaptive selection of therouting path by achieving required retransmissions on the most reliable link. We provethat AJIA outperforms its competitor AODV in term of delivery ratio in different channelconditions. Thereafter, we present ARRP, a variant of AJIA, combining the strengthsof retransmissions, node collaboration and Forward Error Correction (FEC) in order toprovide a reliable packet loss recovery scheme. We verify the efficiency of ARRP throughextensive simulations which proved its high reliability in comparison to its competitor.Vu les perspectives qu'ils offrent, les réseaux de capteur sans fil (RCSF) ont perçu un grand engouement de la part de la communauté de recherche ces dernières années. Les RCSF couvrent une large gamme d'applications variant du contrôle d'environnement, le pistage de cible aux applications de santé. Les RCSFs sont souvent déployés aléatoirement. Ce dispersement des capteurs nécessite que les protocoles de transmission utilisés soient résistants aux conditions environnementales (fortes chaleurs ou pluies par exemple) et aux limitations de ressources des nœuds capteurs. En effet, la perte de plusieurs nœuds capteurs peut engendrer la perte de communication entre les différentes entités. Ces limitations peuvent causer la perte des paquets transmis ce qui entrave l'activité du réseau. Par conséquent, il est important d'assurer la fiabilité des transmissions de données dans les RCSF d'autant plus pour les applications critiques comme la détection d'incendies. Dans cette thèse, nous proposons une solution complète de transmission de données dans les RCSF répondant aux exigences et contraintes de ce type de réseau. Dans un premier temps, nous étudions les contraintes et les challenges liés à la fiabilisation des transmissions dans les RCSFs et nous examinons les travaux proposés dans la littérature. Suite à cette étude nous proposons COMN2, une approche distribuée et scalable permettant de faire face à la défaillance des nœuds. Ensuite, nous proposons un mécanisme de contrôle d'erreur minimisant la perte de paquets et proposant un routage adaptatif en fonction de la qualité du lien. Cette solution est basée sur des acquittements implicites (overhearing) pour la détection des pertes des paquets. Nous proposons ensuite ARRP une variante de AJIA combinant les avantages des retransmissions, de la collaboration des nœuds et des FEC. Enfin, nous simulons ces différentes solutions et vérifions leurs performances par rapport à leurs concurrents de l'état de l'art

Reliable load-balancing routing for resource-constrained wireless sensor networks

Wireless sensor networks (WSNs) are energy and resource constrained. Energy limitations make it advantageous to balance radio transmissions across multiple sensor nodes. Thus, load balanced routing is highly desirable and has motivated a significant volume of research. Multihop sensor network architecture can also provide greater coverage, but requires a highly reliable and adaptive routing scheme to accommodate frequent topology changes. Current reliability-oriented protocols degrade energy efficiency and increase network latency. This thesis develops and evaluates a novel solution to provide energy-efficient routing while enhancing packet delivery reliability. This solution, a reliable load-balancing routing (RLBR), makes four contributions in the area of reliability, resiliency and load balancing in support of the primary objective of network lifetime maximisation. The results are captured using real world testbeds as well as simulations. The first contribution uses sensor node emulation, at the instruction cycle level, to characterise the additional processing and computation overhead required by the routing scheme. The second contribution is based on real world testbeds which comprises two different TinyOS-enabled senor platforms under different scenarios. The third contribution extends and evaluates RLBR using large-scale simulations. It is shown that RLBR consumes less energy while reducing topology repair latency and supports various aggregation weights by redistributing packet relaying loads. It also shows a balanced energy usage and a significant lifetime gain. Finally, the forth contribution is a novel variable transmission power control scheme which is created based on the experience gained from prior practical and simulated studies. This power control scheme operates at the data link layer to dynamically reduce unnecessarily high transmission power while maintaining acceptable link reliability

Application-specific reliable data transfer in wireless sensor networks

A wireless sensor network (WSN) is a collection of sensor nodes and base stations connected via wireless medium. It sends data collected from the nodes to the base stations for generating information. The size and low cost of the sensor nodes as well as the WSN\u27s ability to connect without wired links are its key advantages which enable it to be deployed in hostile or inaccessible environments at low cost. However, WSNs suffer from high data loss due to the inherent weaknesses in a wireless transmission medium, transmission problems in hostile environments due to human interference, etc. and node failures due to limited energy of sensor nodes. Hence ensuring data transfer with minimum loss i.e. reliable data transfer is very important in WSNs. The amount of loss tolerated is application dependent. We present a reliable protocol for data transfer from a base station to sensor nodes for time-critical applications in WSNs with zero tolerance for data loss. The protocol is based on hop-by-hop detection and recovery of lost data packets, out-of-sequence forwarding of packets and delayed request for missing packets at each node with non-acknowledgement of packets at each receiving node. We present a detailed analysis of the advantages of the key features of our protocol over other alternatives. The superiority of our protocol over an established protocol PSFQ is demonstrated via extensive simulations, in terms of both the delivery time of the entire data (sent from the base station to the sensor nodes) and the number of messages exchanged in the network during this process. In addition, we present two methods, one, for ensuring that at least one packet is delivered to a node in non-acknowledgement based systems and another, for sending reports from destination nodes to the base station respectively. We explore different methods for further improvement of protocol performance: (1) use of effective degree of a node in determining the optimum delay for requesting data packets missing at nodes, (2) variation of the priority order for sending different types of messages at nodes and, (3) selective response to requests for packets at nodes