OutFlank Routing: Increasing Throughput in Toroidal Interconnection Networks

We present a new, deadlock-free, routing scheme for toroidal interconnection networks, called OutFlank Routing (OFR). OFR is an adaptive strategy which exploits non-minimal links, both in the source and in the destination nodes. When minimal links are congested, OFR deroutes packets to carefully chosen intermediate destinations, in order to obtain travel paths which are only an additive constant longer than the shortest ones. Since routing performance is very sensitive to changes in the traffic model or in the router parameters, an accurate discrete-event simulator of the toroidal network has been developed to empirically validate OFR, by comparing it against other relevant routing strategies, over a range of typical real-world traffic patterns. On the 16x16x16 (4096 nodes) simulated network OFR exhibits improvements of the maximum sustained throughput between 14% and 114%, with respect to Adaptive Bubble Routing.Comment: 9 pages, 5 figures, to be presented at ICPADS 201

On the design of a high-performance adaptive router for CC-NUMA multiprocessors

Copyright © 2003 IEEEThis work presents the design and evaluation of an adaptive packet router aimed at supporting CC-NUMA traffic. We exploit a simple and efficient packet injection mechanism to avoid deadlock, which leads to a fully adaptive routing by employing only three virtual channels. In addition, we selectively use output buffers for implementing the most utilized virtual paths in order to reduce head-of-line blocking. The careful implementation of these features has resulted in a good trade off between network performance and hardware cost. The outcome of this research is a High-Performance Adaptive Router (HPAR), which adequately balances the needs of parallel applications: minimal network latency at low loads and high throughput at heavy loads. The paper includes an evaluation process in which HPAR is compared with other adaptive routers using FIFO input buffering, with or without additional virtual channels to reduce head-of-line blocking. This evaluation contemplates both the VLSI costs of each router and their performance under synthetic and real application workloads. To make the comparison fair, all the routers use the same efficient deadlock avoidance mechanism. In all the experiments, HPAR exhibited the best response among all the routers tested. The throughput gains ranged from 10 percent to 40 percent in respect to its most direct rival, which employs more hardware resources. Other results shown that HPAR achieves up to 83 percent of its theoretical maximum throughput under random traffic and up to 70 percent when running real applications. Moreover, the observed packet latencies were comparable to those exhibited by simpler routers. Therefore, HPAR can be considered as a suitable candidate to implement packet interchange in next generations of CC-NUMA multiprocessors.Valentín Puente, José-Ángel Gregorio, Ramón Beivide, and Cruz Iz

Efficient bypass mechanisms for low latency networks on-chip

RESUMEN: La importancia de las redes en-chip en los procesadores multi-núcleo es cada vez mayor. Los routers con baipás son una solución eficiente para reducir la latencia de estas redes. Existen dos tipos de redes con baipás: single-hop y multi-hop. Las redes con baipás single-hop minimizan la latencia individual de cada router al asignar los recursos del router con antelación a la recepción de los paquetes. Las redes con baipás multi-hop, conocidas como SMART, permiten que los paquetes atraviesen múltiples routers en un único ciclo. La primera propuesta de esta tesis es Non-Empty Buffer Bypass (NEBB), un mecanismo que incrementa la utilización del baipás de tipo single-hop, eliminando la necesidad de usar canales virtuales. Para redes con baipás multi-hop propone SMART++ y S-SMART++. SMART++ elimina la necesidad de SMART de usar una gran cantidad de canales virtuales para aprovechar el ancho de banda de la red, permitiendo el diseño de configuraciones de bajo coste. S-SMART++ hace uso de la asignación de recursos de forma especulativa para preparar el baipás de tipo multi-hop. Este mecanismo reduce la latencia y su dependencia con la longitud máxima de los saltos de tipo multi-hop, aspecto clave para su viabilidad en diseños reales. La contribución final es un conjunto de herramientas de código abierto llamada Bypass Simulation Toolset (BST) compuesto por versiones extendidas de BookSim y OpenSMART, una API para integrar BookSim en otros simuladores y una serie de scripts para facilitar el diseño y evaluación de este tipo de redes.ABSTRACT: Networks on-Chip (NoCs) are becoming more important in many-core processors as the number of cores grows. Bypass routers are an efficient solution that skips pipeline stages. There are two types of bypass mechanisms: single-hop and multi-hop bypass. Single-hop bypass minimizes the router delay by skipping allocation stages in each hop. Multi-hop bypass, called SMART, minimizes the effective number of hops by traversing multiple routers in a single cycle. The first proposal of this dissertation is Non-Empty Buffer Bypass (NEBB) for single-hop bypass, which increases the bypass utilization without requiring VCs to match traditional bypass routers. It proposes SMART++ and S-SMART++ for multi-hop bypass. SMART++ removes the requirement of using multiple VCs of SMART to exploit the bandwidth of the network, enabling low-cost configurations. S-SMART++ relies on speculative allocation to set up multi-hop bypass paths. Thus, it reduces latency and its dependency with the maximum length of multi-hops, relaxing the requirements to integrate multi-hop bypass in real designs. The final contribution is an open-source set of tools to simulate bypass NoCs called Bypass Simulation Toolset (BST) conformed by extended versions of BookSim and OpenSMART, an API to integrate BookSim in other simulators, and scripts to simplify the designing and evaluation of such NoCs.This work was supported by the Spanish Ministry of Science, Innovation and Universities, FPI grant BES-2017-079971, and contracts TIN2010-21291-C02-02, TIN2013- 46957-C2-2-P, TIN2015-65316-P, TIN2016-76635-C2-2-R (AEI/FEDER, UE) and TIC PID2019-105660RB-C22; the European HiPEAC Network of Excellence; the European Community's Seventh Framework Programme (FP7/2007-2013), under the Mont-Blanc 1 and 2 projects (grant agreements n 288777 and 610402); the European Union's Horizon 2020 research and innovation programme under the Mont-Blanc 3 project (grant agreement nº 671697). Bluespec Inc. provided access to Bluespec tools

Assessing the Suitability of King Topologies for Interconnection Networks

In the late years many different interconnection networks have been used with two main tendencies. One is characterized by the use of high-degree routers with long wires while the other uses routers of much smaller degree. The latter rely on two-dimensional mesh and torus topologies with shorter local links. This paper focuses on doubling the degree of common 2D meshes and tori while still preserving an attractive layout for VLSI design. By adding a set of diagonal links in one direction, diagonal networks are obtained. By adding a second set of links, networks of degree eight are built, named king networks. This research presents a comprehensive study of these networks which includes a topological analysis, the proposal of appropriate routing procedures and an empirical evaluation. King networks exhibit a number of attractive characteristics which translate to reduced execution times of parallel applications. For example, the execution times NPB suite are reduced up to a 30 percent. In addition, this work reveals other properties of king networks such as perfect partitioning that deserves further attention for its convenient exploitation in forthcoming high-performance parallel systems

Predictive and distributed routing balancing (PR-DRB) : high speed interconnection networks

Current parallel applications running on clusters require the use of an interconnection network to perform communications among all computing nodes available. Imbalance of communications can produce network congestion, reducing throughput and increasing latency, degrading the overall system performance. On the other hand, parallel applications running on these networks posses representative stages which allow their characterization, as well as repetitive behavior that can be identified on the basis of this characterization. This work presents the Predictive and Distributed Routing Balancing (PR-DRB), a new method developed to gradually control network congestion, based on paths expansion, traffic distribution and effective traffic load, in order to maintain low latency values. PR-DRB monitors messages latencies on intermediate routers, makes decisions about alternative paths and record communication pattern information encountered during congestion situation. Based on the concept of applications repetitiveness, best solution recorded are reapplied when saved communication pattern re-appears. Traffic congestion experiments were conducted in order to evaluate the performance of the method, and improvements were observed.Les aplicacions paral·leles actuals en els Clústers requereixen l'ús d'una xarxa d'interconnexió per comunicar a tots els nodes de còmput disponibles. El desequilibri en la càrrega de comunicacions pot congestionar la xarxa, incrementant la latència i disminuint el throughput, degradant el rendiment total del sistema. D'altra banda, les aplicacions paral·leles que s'executen sobre aquestes xarxes contenen etapes representatives durant la seva execució les quals permeten caracteritzar-les, a més d'extraure un comportament repetitiu que pot ser identificat en base a aquesta caracterització. Aquest treball presenta el Balanceig Predictiu de Encaminament Distribuït (PR-DRB), un nou mètode desenvolupat per controlar la congestió a la xarxa en forma gradual, basat en l'expansió de camins, la distribució de trànsit i càrrega efectiva actual per tal de mantenir una latència baixa. PR-DRB monitoritza la latència dels missatges en els encaminadors, pren decisions sobre els camins alternatius a utilitzar i registra la informació de la congestió sobre la base del patró de comunicacions detectat, utilitzant com a concepte base la repetitivitat de les aplicacions per després tornar a aplicar la millor solució quan aquest patró es repeteixi. Experiments de trànsit amb congestió van ser portats a terme per avaluar el rendiment del mètode, els quals van mostrar la bondat del mateix.Las aplicaciones paralelas actuales en los Clústeres requieren el uso de una red de interconexión para comunicar a todos los nodos de cómputo disponibles. El desbalance en la carga de comunicaciones puede congestionar la red, incrementando la latencia y disminuyendo el throughput, degradando el rendimiento total del sistema. Por otro lado, las aplicaciones paralelas que corren sobre estas redes contienen etapas representativas durante su ejecución las cuales permiten caracterizarlas, además de un comportamiento repetitivo que puede ser identificado en base a dicha caracterización. Este trabajo presenta el Balanceo Predictivo de Encaminamiento Distribuido (PR-DRB), un nuevo método desarrollado para controlar la congestión en la red en forma gradual; basado en la expansión de caminos, la distribución de tráfico y carga efectiva actual, a fin de mantener una latencia baja. PR-DRB monitorea la latencia de los mensajes en los encaminadores, toma decisiones sobre los caminos alternativos a utilizar y registra la información de la congestión en base al patrón de comunicaciones detectado, usando como concepto base la repetitividad de las aplicaciones para luego volver a aplicar la mejor solución cuando dicho patrón se repita. Experimentos de tráfico con congestión fueron llevados a cabo para evaluar el rendimiento del método, los cuales mostraron la bondad del mismo

Efficient routing mechanisms for Dragonfly networks

High-radix hierarchical networks are cost-effective topologies for large scale computers. In such networks, routers are organized in super nodes, with local and global interconnections. These networks, known as Dragonflies, outperform traditional topologies such as multi-trees or tori, in cost and scalability. However, depending on the traffic pattern, network congestion can lead to degraded performance. Misrouting (non-minimal routing) can be employed to avoid saturated global or local links. Nevertheless, with the current deadlock avoidance mechanisms used for these networks, supporting misrouting implies routers with a larger number of virtual channels. This exacerbates the buffer memory requirements that constitute one of the main constraints in high-radix switches. In this paper we introduce two novel deadlock-free routing mechanisms for Dragonfly networks that support on-the-fly adaptive routing. Using these schemes both global and local misrouting are allowed employing the same number of virtual channels as in previous proposals. Opportunistic Local Misrouting obtains the best performance by providing the highest routing freedom, and relying on a deadlock-free escape path to the destination for every packet. However, it requires Virtual Cut-Through flow-control. By contrast, Restricted Local Misrouting prevents the appearance of cycles thanks to a restriction of the possible routes within super nodes. This makes this mechanism suitable for both Virtual Cut-Through and Wormhole networks. Evaluations show that the proposed deadlock-free routing mechanisms prevent the most frequent pathological issues of Dragonfly networks. As a result, they provide higher performance than previous schemes, while requiring the same area devoted to router buffers.This work has been supported by the Spanish Ministry of Science under contracts TIN2010-21291-C02-02, TIN2012-34557, and by the European HiPEAC Network of Excellence. The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013) / ERC Grant Agreement n. ERC-2012-Adg-321253-RoMoL. M. Garc´ıa and M. Odriozola participated in this research work while they were affiliated with the University of Cantabria.Peer ReviewedPostprint (author's final draft

New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast