Overlap-Minimization Scheduling Strategy for Data Transmission in VANET

The vehicular ad-hoc network (VANET) based on dedicated short-range communication (DSRC) is a distributed communication system, in which all the nodes share the wireless channel with carrier sense multiple access/collision avoid (CSMA/CA) protocol. However, the competition and backoff mechanisms of CSMA/CA often bring additional delays and data packet collisions, which may hardly meet the QoS requirements in terms of delay and packets delivery ratio (PDR). Moreover, because of the distribution nature of security information in broadcast mode, the sender cannot know whether the receivers have received the information successfully. Similarly, this problem also exists in no-acknowledge (non-ACK) transmissions of VANET. Therefore, the probability of packet collisions should be considered in broadcast or non-ACK working modes. This paper presents a connection-level scheduling algorithm overlaid on CSMA/CA to schedule the start sending time of each transmission. By converting the object of reducing collision probability to minimizing the overlap of transmission durations of connections, the probability of backoff-activation can be greatly decreased. Then the delay and the probability of packet collisions can also be decreased. Numerical simulations have been conducted in our unified platform containing SUMO, Veins and Omnet++. The result shows that the proposed algorithm can effectively improve the PDR and reduce the packets collision in VANET.Comment: 6 pages,7 figure

Enhancing infotainment applications quality of service in vehicular ad hoc networks

Les réseaux ad hoc de véhicules accueillent une multitude d’applications intéressantes. Parmi celles-ci, les applications d’info-divertissement visent à améliorer l’expérience des passagers. Ces applications ont des exigences rigides en termes de délai de livraison et de débit. De nombreuses approches ont été proposées pour assurer la qualité du service des dites applications. Elles sont réparties en deux couches : réseau et contrôle d’accès. Toutefois, ces méthodes présentent plusieurs lacunes. Cette thèse a trois volets. Le premier aborde la question du routage dans le milieu urbain. A cet égard, un nouveau protocole, appelé SCRP, a été proposé. Il exploite l’information sur la circulation des véhicules en temps réel pour créer des épines dorsales sur les routes et les connecter aux intersections à l’aide des nœuds de pont. Ces derniers collectent des informations concernant la connectivité et le délai, utilisées pour choisir les chemins de routage ayant un délai de bout-en-bout faible. Le deuxième s’attaque au problème d’affectation des canaux de services afin d’augmenter le débit. A cet effet, un nouveau mécanisme, appelé ASSCH, a été conçu. ASSCH collecte des informations sur les canaux en temps réel et les donne à un modèle stochastique afin de prédire leurs états dans l’avenir. Les canaux les moins encombrés sont sélectionnés pour être utilisés. Le dernier volet vise à proposer un modèle analytique pour examiner la performance du mécanisme EDCA de la norme IEEE 802.11p. Ce modèle tient en compte plusieurs facteurs, dont l’opportunité de transmission, non exploitée dans IEEE 802.11p.The fact that vehicular ad hoc network accommodates two types of communications, Vehicle-to-Vehicle and Vehicle-to-Infrastructure, has opened the door for a plethora of interesting applications to thrive. Some of these applications, known as infotainment applications, focus on enhancing the passengers' experience. They have rigid requirements in terms of delivery delay and throughput. Numerous approaches have been proposed, at medium access control and routing layers, to enhance the quality of service of such applications. However, existing schemes have several shortcomings. Subsequently, the design of new and efficient approaches is vital for the proper functioning of infotainment applications. This work proposes three schemes. The first is a novel routing protocol, labeled SCRP. It leverages real-time vehicular traffic information to create backbones over road segments and connect them at intersections using bridge nodes. These nodes are responsible for collecting connectivity and delay information, which are used to select routing paths with low end-to-end delay. The second is an altruistic service channel selection scheme, labeled ASSCH. It first collects real-time service channels information and feeds it to a stochastic model that predicts the state of these channels in the near future. The least congested channels are then selected to be used. The third is an analytical model for the performance of the IEEE 802.11p Enhanced Distributed Channel Access mechanism that considers various factors, including the transmission opportunity (TXOP), unexploited by IEEE 802.11p

Time-Dependent Performance Modeling for Platooning Communications at Intersection

With the development of internet of vehicles, platooning strategy has been widely studied as the potential approach to ensure the safety of autonomous driving. Vehicles in the form of platoon adopt 802.11p to exchange messages through vehicle to vehicle (V2V) communications. When multiple platoons arrive at an intersection, the leader vehicle of each platoon adjusts its movement characteristics to ensure that it can cross the intersection and thus the following vehicles have to adjust their movement characteristics accordingly. In this case, the time-varying connectivity among vehicles leads to the significant non-stationary performance change in platooning communications, which may incur safety issues. In this paper, we construct the time-dependent model to evaluate the platooning communication performance at the intersection based on the initial movement characteristics. We first consider the movement behaviors of vehicles at the intersection including turning, accelerating, decelerating and stopping as well as the periodic change of traffic lights to construct movement model, and then establish a hearing network to reflect the time-varying connectivity among vehicles. Afterwards, we adopt the pointwise stationary fluid flow approximation (PSFFA) to model the non-stationary behavior of transmission queue. Then, we consider four access categories (ACs) and continuous backoff freezing of 802.11p to construct the models to describe the time-dependent access process of 802.11p. Finally, based on the time-dependent model, the packet transmission delay and packet delivery ratio are derived. The accuracy of our proposed model is verified by comparing the simulation results with analytical results.Comment: This paper has been accepted by IEEE Internet of Things Journa

SDDV: scalable data dissemination in vehicular ad hoc networks

An important challenge in the domain of vehicular ad hoc networks (VANET) is the scalability of data dissemination. Under dense traffic conditions, the large number of communicating vehicles can easily result in a congested wireless channel. In that situation, delays and packet losses increase to a level where the VANET cannot be applied for road safety applications anymore. This paper introduces scalable data dissemination in vehicular ad hoc networks (SDDV), a holistic solution to this problem. It is composed of several techniques spread across the different layers of the protocol stack. Simulation results are presented that illustrate the severity of the scalability problem when applying common state-of-the-art techniques and parameters. Starting from such a baseline solution, optimization techniques are gradually added to SDDV until the scalability problem is entirely solved. Besides the performance evaluation based on simulations, the paper ends with an evaluation of the final SDDV configuration on real hardware. Experiments including 110 nodes are performed on the iMinds w-iLab.t wireless lab. The results of these experiments confirm the results obtained in the corresponding simulations

Performance Evaluation of Wireless Medium Access Control Protocols for Internet of Things

The Internet of Things makes the residents in Smart Cities enjoy a more efficient and high-quality lifestyle by wirelessly interconnecting the physical and visual world. However, the performance of wireless networks is challenged by the ever-growing wireless traffic data, the complexity of the network structures, and various requirements of Quality of Service (QoS), especially on the Internet of Vehicle and wireless sensor networks. Consequently, the IEEE 802.11p and 802.11ah standards were designed to support effective inter-vehicle communications and large-scale sensor networks, respectively. Although their Medium Access Control protocols have attracted much research interest, they have yet to fully consider the influences of channel errors and buffer sizes on the performance evaluation of these Medium Access Control (MAC) protocols. Therefore, this thesis first proposed a new analytical model based on a Markov chain and Queuing analysis to evaluate the performance of IEEE 802.11p under imperfect channels with both saturated and unsaturated traffic. All influential factors of the Enhanced Distributed Channel Access (EDCA) mechanism in IEEE 802.11p are considered, including the backoff counter freezing, Arbitration Inter-Frame Spacing (AIFS) defers, the internal collision, and finite MAC buffer sizes. Furthermore, this proposed model considers more common and actual conditions with the influence of channel errors and finite MAC buffer sizes. The effectiveness and accuracy of the developed model have been validated through extensive ns-3 simulation experiments. Second, this thesis proposes a developed analytical model based on Advanced Queuing Analysis and the Gilbert-Elliot model to analyse the performance of IEEE 802.11p with burst error transmissions. This proposed analytical model simultaneously describes transmission queues for all four Access Categories (AC) queues with the influence of burst errors. Similarly, this presented model can analyse QoS performance, including throughputs and end-to-end delays with the unsaturated or saturated load traffics. Furthermore, this model operates under more actual bursty error channels in vehicular environments. In addition, a series of simulation experiments with a natural urban environment is designed to validate the efficiency and accuracy of the presented model. The simulation results reflect the reliability and effectiveness of the presented model in terms of throughput and end-to-end delays under various channel conditions. Third, this thesis designed and implemented a simulation experiment to analyse the performance of IEEE 802.11ah. These simulation experiments are based on ns-3 and an extension. These simulation experiments' results indicate the Restricted Access Window (RAW) mechanism's influence on the throughputs, end-to-end delays, and packet loss rates. Furthermore, the influences of channel errors and bursty errors are considered in the simulations. The results also show the strong impact of channel errors on the performance of IEEE 802.11ah due to urban environments. Finally, the potential future work based on the proposed models and simulations is analysed in this thesis. The proposed models of IEEE 802.11p can be an excellent fundamental to optimise the QoS due to the precise evaluation of the influence of factors on the performance of IEEE 802.11p. Moreover, it is possible to migrate the analytical models of IEEE 802.11p to evaluate the performance of IEEE 802.11ah

Models and Performance of VANET based Emergency Braking

The network research community is working in the field of automotive to provide VANET based safety applications to reduce the number of accidents, deaths, injuries and loss of money. Several approaches are proposed and investigated in VANET literature, but in a completely network-oriented fashion. Most of them do not take into account application requirements and no one considers the dynamics of the vehicles. Moreover, message repropagation schemes are widely proposed without investigating their benefits and using very complicated approaches. This technical report, which is derived from the Master Thesis of Michele Segata, focuses on the Emergency Electronic Brake Lights (EEBL) safety application, meant to send warning messages in the case of an emergency brake, in particular performing a joint analysis of network requirements and provided application level benefits. The EEBL application is integrated within a Collaborative Adaptive Cruise Control (CACC) which uses network-provided information to automatically brake the car if the driver does not react to the warning. Moreover, an information aggregation scheme is proposed to analyze the benefits of repropagation together with the consequent increase of network load. This protocol is compared to a protocol without repropagation and to a rebroadcast protocol found in the literature (namely the weighted p-persistent rebroadcast). The scenario is a highway stretch in which a platoon of vehicles brake down to a complete stop. Simulations are performed using the NS_3 network simulation in which two mobility models have been embedded. The first one, which is called Intelligent Driver Model (IDM) emulates the behavior of a driver trying to reach a desired speed and braking when approaching vehicles in front. The second one (Minimizing Overall Braking Induced by Lane change (MOBIL)), instead, decides when a vehicle has to change lane in order to perform an overtake or optimize its path. The original simulator has been modified by - introducing real physical limits to naturally reproduce real crashes; - implementing a CACC; - implementing the driver reaction when a warning is received; - implementing different network protocols. The tests are performed in different situations, such as different number of lanes (one to five), different average speeds, different network protocols and different market penetration rates and they show that: - the adoption of this technology considerably decreases car accidents since the overall average maximum deceleration is reduced; - network load depends on application-level details, such as the implementation of the CACC; - VANET safety application can improve safety even with a partial market penetration rate; - message repropagation is important to reduce the risk of accidents when not all vehicles are equipped; - benefits are gained not only by equipped vehicles but also by unequipped ones

Intelligent and bandwidth-efficient medium access control protocols for IEEE 802.11p-based Vehicular Ad hoc Networks

Vehicle-to-Vehicle (V2V) technology aims to enable safer and more sophisticated transportation via the spontaneous formation of Vehicular Ad hoc Networks (VANETs). This type of wireless networks allows the exchange of kinematic and other data among vehicles, for the primary purpose of safer and more efficient driving, as well as efficient traffic management and other third-party services. Their infrastructure-less, unbounded nature allows the formation of dense networks that present a channel sharing issue, which is harder to tackle than in conventional WLANs. This thesis focuses on optimising channel access strategies, which is important for the efficient usage of the available wireless bandwidth and the successful deployment of VANETs. To start with, the default channel access control method for V2V is evaluated hardware via modifying the appropriate wireless interface Linux driver to enable finer on-the-fly control of IEEE 802.11p access control layer parameters. More complex channel sharing scenarios are evaluated via simulations and findings on the behaviour of the access control mechanism are presented. A complete channel sharing efficiency assessment is conducted, including throughput, fairness and latency measurements. A new IEEE 802.11p-compatible Q-Learning-based access control approach that improves upon the studied protocol is presented. The stations feature algorithms that “learn” how to act optimally in VANETs in order to maximise their achieved packet delivery and minimise bandwidth wastage. The feasibility of Q-Learning to be used as the base of selflearning protocols for IEEE 802.11p-based V2V communication access control in dense environments is investigated in terms of parameter tuning, necessary time of exploration, achieving latency requirements, scaling, multi-hop and accommodation of simultaneous applications. Additionally, the novel Collection Contention Estimation (CCE) mechanism for Q-Learning-based access control is presented. By embedding it on the Q-Learning agents, faster convergence, higher throughput, better service separation and short-term fairness are achieved in simulated network deployments. The acquired new insights on the network performance of the proposed algorithms can provide precise guidelines for efficient designs of practical, reliable, fair and ultra-low latency V2V communication systems for dense topologies. These results can potentially have an impact across a range of related areas, including various types of wireless networks and resource allocation for these, network protocol and transceiver design as well as QLearning applicability and considerations for correct use

A Q-Learning approach with collective contention estimation for bandwidth-efficient and fair access control in IEEE 802.11p vehicular networks

Vehicular Ad hoc Networks (VANETs) are wireless networks formed of moving vehicle-stations, that enable safety-related packet exchanges among them. Their infrastructure-less, unbounded nature allows the formation of dense networks that present a channel sharing issue, which is harder to tackle than in conventional WLANs, due to fundamental differences of the protocol stack. Optimising channel access strategies is important for the efficient usage of the available wireless bandwidth and the successful deployment of VANETs. We present a Q-Learning-based approach to wirelessly network a big number of vehicles and enable the efficient exchange of data packets among them. More specifically, this work focuses on a IEEE 802.11p-compatible contention-based Medium Access Control (MAC) protocol for efficiently sharing the wireless channel among multiple vehicular stations. The stations feature algorithms that "learn" how to act optimally in a network in order to maximise their achieved packet delivery and minimise bandwidth wastage. Additionally, via a Collective Contention Estimation (CCE) mechanism which we embed on the Q-Learning agent, faster convergence, higher throughput and short-term fairness are achieved