2022 roadmap on neuromorphic computing and engineering

Modern computation based on von Neumann architecture is now a mature cutting-edge science. In the von Neumann architecture, processing and memory units are implemented as separate blocks interchanging data intensively and continuously. This data transfer is responsible for a large part of the power consumption. The next generation computer technology is expected to solve problems at the exascale with 10$^{18}$ calculations each second. Even though these future computers will be incredibly powerful, if they are based on von Neumann type architectures, they will consume between 20 and 30 megawatts of power and will not have intrinsic physically built-in capabilities to learn or deal with complex data as our brain does. These needs can be addressed by neuromorphic computing systems which are inspired by the biological concepts of the human brain. This new generation of computers has the potential to be used for the storage and processing of large amounts of digital information with much lower power consumption than conventional processors. Among their potential future applications, an important niche is moving the control from data centers to edge devices. The aim of this roadmap is to present a snapshot of the present state of neuromorphic technology and provide an opinion on the challenges and opportunities that the future holds in the major areas of neuromorphic technology, namely materials, devices, neuromorphic circuits, neuromorphic algorithms, applications, and ethics. The roadmap is a collection of perspectives where leading researchers in the neuromorphic community provide their own view about the current state and the future challenges for each research area. We hope that this roadmap will be a useful resource by providing a concise yet comprehensive introduction to readers outside this field, for those who are just entering the field, as well as providing future perspectives for those who are well established in the neuromorphic computing community

Algorithm and Hardware Co-Design for Local/Edge Computing

Advances in VLSI manufacturing and design technology over the decades have created many computing paradigms for disparate computing needs. With concerns for transmission cost, security, latency of centralized computing, edge/local computing are increasingly prevalent in the faster growing sectors like Internet-of-Things (IoT) and other sectors that require energy/connectivity autonomous systems such as biomedical and industrial applications. Energy and power efficient are the main design constraints in local and edge computing. While there exists a wide range of low power design techniques, they are often underutilized in custom circuit designs as the algorithms are developed independent of the hardware. Such compartmentalized design approach fails to take advantage of the many compatible algorithmic and hardware techniques that can improve the efficiency of the entire system. Algorithm hardware co-design is to explore the design space with whole stack awareness. The main goal of the algorithm hardware co-design methodology is the enablement and improvement of small form factor edge and local VLSI systems operating under strict constraints of area and energy efficiency. This thesis presents selected works of application specific digital and mixed-signal integrated circuit designs. The application space ranges from implantable biomedical devices to edge machine learning acceleration

The internet of ontological things: On symmetries between ubiquitous problems and their computational solutions in the age of smart objects

This dissertation is about an abstract form of computer network that has recently earned a new physical incarnation called “the Internet of Things.” It surveys the ontological transformations that have occurred over recent decades to the computational components of this network, objects—initially designed as abstract algorithmic agents in a source code of computer programming but now transplanted into real-world objects. Embodying the ideal of modularity, objects have provided computer programmers with more intuitive means to construct a software application with lots of simple and reusable functional building blocks. Their capability of being reassembled into many different networks for a variety of applications has also embodied another ideal of computing machines, namely general-purposiveness. In the algorithmic cultures of the past century, these objects existed as mere abstractions to help humans to understand electromagnetic signals that had infiltrated every corner of automatized spaces from private to public. As an instrumental means to domesticate these elusive signals into programmable architectures according to the goals imposed by professional programmers and amateur end-users, objects promised a universal language for any computable human activities. This utopian vision for the object-oriented domestication of the digital has had enough traction for the growth of the software industry as it has provided an alibi to hide another process of colonization occurring on the flipside of their interfacing between humans and machines: making programmable the highest number of online and offline human activities possible. A more recent media age, which this dissertation calls the age of the Internet of Things, refers to the second phase of this colonization of human cultures by the algorithmic objects, no longer trapped in the hard-wired circuit boards of personal computer, but now residing in real-life objects with new wireless communicability. Chapters of this dissertation examine each different computer application—a navigation system in a smart car, smart home, open-world video games, and neuro-prosthetics—as each particular case of this object-oriented redefinition of human cultures

Electronic systems for the restoration of the sense of touch in upper limb prosthetics

In the last few years, research on active prosthetics for upper limbs focused on improving the human functionalities and the control. New methods have been proposed for measuring the user muscle activity and translating it into the prosthesis control commands. Developing the feed-forward interface so that the prosthesis better follows the intention of the user is an important step towards improving the quality of life of people with limb amputation. However, prosthesis users can neither feel if something or someone is touching them over the prosthesis and nor perceive the temperature or roughness of objects. Prosthesis users are helped by looking at an object, but they cannot detect anything otherwise. Their sight gives them most information. Therefore, to foster the prosthesis embodiment and utility, it is necessary to have a prosthetic system that not only responds to the control signals provided by the user, but also transmits back to the user the information about the current state of the prosthesis. This thesis presents an electronic skin system to close the loop in prostheses towards the restoration of the sense of touch in prosthesis users. The proposed electronic skin system inlcudes an advanced distributed sensing (electronic skin), a system for (i) signal conditioning, (ii) data acquisition, and (iii) data processing, and a stimulation system. The idea is to integrate all these components into a myoelectric prosthesis. Embedding the electronic system and the sensing materials is a critical issue on the way of development of new prostheses. In particular, processing the data, originated from the electronic skin, into low- or high-level information is the key issue to be addressed by the embedded electronic system. Recently, it has been proved that the Machine Learning is a promising approach in processing tactile sensors information. Many studies have been shown the Machine Learning eectiveness in the classication of input touch modalities.More specically, this thesis is focused on the stimulation system, allowing the communication of a mechanical interaction from the electronic skin to prosthesis users, and the dedicated implementation of algorithms for processing tactile data originating from the electronic skin. On system level, the thesis provides design of the experimental setup, experimental protocol, and of algorithms to process tactile data. On architectural level, the thesis proposes a design ow for the implementation of digital circuits for both FPGA and integrated circuits, and techniques for the power management of embedded systems for Machine Learning algorithms

Enhanced Living Environments

This open access book was prepared as a Final Publication of the COST Action IC1303 “Algorithms, Architectures and Platforms for Enhanced Living Environments (AAPELE)”. The concept of Enhanced Living Environments (ELE) refers to the area of Ambient Assisted Living (AAL) that is more related with Information and Communication Technologies (ICT). Effective ELE solutions require appropriate ICT algorithms, architectures, platforms, and systems, having in view the advance of science and technology in this area and the development of new and innovative solutions that can provide improvements in the quality of life for people in their homes and can reduce the financial burden on the budgets of the healthcare providers. The aim of this book is to become a state-of-the-art reference, discussing progress made, as well as prompting future directions on theories, practices, standards, and strategies related to the ELE area. The book contains 12 chapters and can serve as a valuable reference for undergraduate students, post-graduate students, educators, faculty members, researchers, engineers, medical doctors, healthcare organizations, insurance companies, and research strategists working in this area

Investigando Natural User Interfaces (NUIs) : tecnologias e interação em contexto de acessibilidade

Orientador: Maria Cecília Calani BaranauskasTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Natural User Interfaces (NUIs) representam um novo paradigma de interação, com a promessa de ser mais intuitivo e fácil de usar do que seu antecessor, que utiliza mouse e teclado. Em um contexto no qual as tecnologias estão cada vez mais invisíveis e pervasivas, não só a quantidade mas também a diversidade de pessoas que participam deste contexto é crescente. Nesse caso, é preciso estudar como esse novo paradigma de interação de fato consegue ser acessível a todas as pessoas que podem utilizá-lo no dia-a-dia. Ademais, é preciso também caracterizar o paradigma em si, para entender o que o torna, de fato, natural. Portanto, nesta tese apresentamos o caminho que percorremos em busca dessas duas respostas: como caracterizar NUIs, no atual contexto tecnológico, e como tornar NUIs acessíveis para todos. Para tanto, primeiro apresentamos uma revisão sistemática de literatura com o estado da arte. Depois, mostramos um conjunto de heurísticas para o design e a avaliação de NUIs, que foram aplicadas em estudos de caso práticos. Em seguida, estruturamos as ideias desta pesquisa dentro dos artefatos da Semiótica Organizacional, e obtivemos esclarecimentos sobre como fazer o design de NUIs com Acessibilidade, seja por meio de Design Universal, seja para propor Tecnologias Assistivas. Depois, apresentamos três estudos de caso com sistemas NUI cujo design foi feito por nós. A partir desses estudos de caso, expandimos nosso referencial teórico e conseguimos, por fim, encontrar três elementos que resumem a nossa caracterização de NUI: diferenças, affordances e enaçãoAbstract: Natural User Interfaces (NUIs) represent a new interaction paradigm, with the promise of being more intuitive and easy to use than its predecessor, that utilizes mouse and keyboard. In a context where technology is becoming each time more invisible and pervasive, not only the amount but also the diversity of people who participate in this context is increasing. In this case, it must be studied how this new interaction paradigm can, in fact, be accessible to all the people who may use it on their daily routine. Furthermore, it is also necessary to characterize the paradigm itself, to understand what makes it, in fact, natural. Therefore, in this thesis we present the path we took in search of these two answers: how to characterize NUIs in the current technological context, and how to make NUIs accessible to all. To do so, first we present a systematic literature review with the state of the art. Then, we show a set of heuristics for the design and evaluation of NUIs, which were applied in practical study cases. Afterwards, we structure the ideas of this research into the Organizational Semiotics artifacts, and we obtain insights into how to design NUIs with Accessibility, be it through Universal Design, be it to propose Assistive Technologies. Then, we present three case studies with NUI systems which we designed. From these case studies, we expanded our theoretical references were able to, finally, find three elements that sum up our characterization of NUI: differences, affordances and enactionDoutoradoCiência da ComputaçãoDoutora em Ciência da Computação160911/2015-0CAPESCNP

High-Performance Modelling and Simulation for Big Data Applications

This open access book was prepared as a Final Publication of the COST Action IC1406 “High-Performance Modelling and Simulation for Big Data Applications (cHiPSet)“ project. Long considered important pillars of the scientific method, Modelling and Simulation have evolved from traditional discrete numerical methods to complex data-intensive continuous analytical optimisations. Resolution, scale, and accuracy have become essential to predict and analyse natural and complex systems in science and engineering. When their level of abstraction raises to have a better discernment of the domain at hand, their representation gets increasingly demanding for computational and data resources. On the other hand, High Performance Computing typically entails the effective use of parallel and distributed processing units coupled with efficient storage, communication and visualisation systems to underpin complex data-intensive applications in distinct scientific and technical domains. It is then arguably required to have a seamless interaction of High Performance Computing with Modelling and Simulation in order to store, compute, analyse, and visualise large data sets in science and engineering. Funded by the European Commission, cHiPSet has provided a dynamic trans-European forum for their members and distinguished guests to openly discuss novel perspectives and topics of interests for these two communities. This cHiPSet compendium presents a set of selected case studies related to healthcare, biological data, computational advertising, multimedia, finance, bioinformatics, and telecommunications