Future bathroom: A study of user-centred design principles affecting usability, safety and satisfaction in bathrooms for people living with disabilities

Research and development work relating to assistive technology 2010-11 (Department of Health) Presented to Parliament pursuant to Section 22 of the Chronically Sick and Disabled Persons Act 197

Learning Motion Predictors for Smart Wheelchair using Autoregressive Sparse Gaussian Process

Constructing a smart wheelchair on a commercially available powered wheelchair (PWC) platform avoids a host of seating, mechanical design and reliability issues but requires methods of predicting and controlling the motion of a device never intended for robotics. Analog joystick inputs are subject to black-box transformations which may produce intuitive and adaptable motion control for human operators, but complicate robotic control approaches; furthermore, installation of standard axle mounted odometers on a commercial PWC is difficult. In this work, we present an integrated hardware and software system for predicting the motion of a commercial PWC platform that does not require any physical or electronic modification of the chair beyond plugging into an industry standard auxiliary input port. This system uses an RGB-D camera and an Arduino interface board to capture motion data, including visual odometry and joystick signals, via ROS communication. Future motion is predicted using an autoregressive sparse Gaussian process model. We evaluate the proposed system on real-world short-term path prediction experiments. Experimental results demonstrate the system's efficacy when compared to a baseline neural network model.Comment: The paper has been accepted to the International Conference on Robotics and Automation (ICRA2018

How a Diverse Research Ecosystem Has Generated New Rehabilitation Technologies: Review of NIDILRR’s Rehabilitation Engineering Research Centers

Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their conception by a panel of the National Academy of Science in 1970, these centers were intended to take a “total approach to rehabilitation”, combining medicine, engineering, and related science, to improve the quality of life of individuals with a disability. Here, we review the scope, achievements, and ongoing projects of an unbiased sample of 19 currently active or recently terminated RERCs. Specifically, for each center, we briefly explain the needs it targets, summarize key historical advances, identify emerging innovations, and consider future directions. Our assessment from this review is that the RERC program indeed involves a multidisciplinary approach, with 36 professional fields involved, although 70% of research and development staff are in engineering fields, 23% in clinical fields, and only 7% in basic science fields; significantly, 11% of the professional staff have a disability related to their research. We observe that the RERC program has substantially diversified the scope of its work since the 1970’s, addressing more types of disabilities using more technologies, and, in particular, often now focusing on information technologies. RERC work also now often views users as integrated into an interdependent society through technologies that both people with and without disabilities co-use (such as the internet, wireless communication, and architecture). In addition, RERC research has evolved to view users as able at improving outcomes through learning, exercise, and plasticity (rather than being static), which can be optimally timed. We provide examples of rehabilitation technology innovation produced by the RERCs that illustrate this increasingly diversifying scope and evolving perspective. We conclude by discussing growth opportunities and possible future directions of the RERC program

Empowering and assisting natural human mobility: The simbiosis walker

This paper presents the complete development of the Simbiosis Smart Walker. The device is equipped with a set of sensor subsystems to acquire user-machine interaction forces and the temporal evolution of user's feet during gait. The authors present an adaptive filtering technique used for the identification and separation of different components found on the human-machine interaction forces. This technique allowed isolating the components related with the navigational commands and developing a Fuzzy logic controller to guide the device. The Smart Walker was clinically validated at the Spinal Cord Injury Hospital of Toledo - Spain, presenting great acceptability by spinal chord injury patients and clinical staf

Toward an Automatic Road Accessibility Information Collecting and Sharing Based on Human Behavior Sensing Technologies of Wheelchair Users

AbstractThis research proposes a methodology for digitizing street level accessibility with human sensing of wheelchair users. The dig- itization of street level accessibility is essential to develop accessibility maps or to personalize a route considering accessibility. However, current digitization methodologies are not sufficient because it requires a lot of manpower and therefore money and time cost. The proposed method makes it possible to digitize the accessibility semi-automatically. In this research, a three-axis accelerometer embedded on iPod touch sensed actions of nine wheelchair users across the range of disabilities and aged groups, in Tokyo, approximately 9hours. This paper reports out attempts to estimate both environmental factors: the status of street and subjective factors: driver's fatigue from human sensing data using machine learning

IoT-based smart wheelchair system for physically impaired person / Muhammad Afiq Mohd Aizam... [et al.]

Disabled persons usually require an assistant to help them in their daily routines especially for their mobility. The limitation of being physically impaired affects the quality of life in executing their daily routine especially the ones with a wheelchair. Pushing a wheelchair has its own side effects for the user especially the person with hands and arms impairments. This paper aims to develop a smart wheelchair system integrated with home automation. With the advent of the Internet of Things (IoT), a smart wheelchair can be operated using voice command through the Google assistant Software Development Kit (SDK). The smart wheelchair system and the home automation of this study were powered by Raspberry Pi 3 B+ and NodeMCU, respectively. Voice input commands were processed by the Google assistant Artificial Intelligence Yourself (AIY) to steer the movement of wheelchair. Users were able to speak to Google to discover any information from the website. For the safety of the user, a streaming camera was added on the wheelchair. An improvement to the wheelchair system that was added on the wheelchair is its combination with the home automation to help the impaired person to control their home appliances through Blynk application. Observations on three voice tones (low, medium and high) of voice command show that the minimum voice intensity for this smart wheelchair system is 68.2 dB. Besides, the user is also required to produce a clear voice command to increase the system accuracy

Impulsive differential equations by using the Euler method

The theory of impulsive differential equations is emerging as an important area of investigation since such equations appear to represent a natural framework for mathematical modeling of several real phenomena. There have been intensive studies on the qualitative behavior of solutions of the impulsive differential equations. However, many impulsive differential equations cannot be solved analytically or their solving is complicated. In this paper, we represent the algorithm which follows the theory of impulsive differential equations to solve the impulsive differential equations by using the Euler methods. It is clearly shown the impulsive operators k I that acts at the moments k t influence the error. Finally, the better convergence result of the numerical solution is given by solving the numerical examples

Impulsive differential equations by using the Euler method

The theory of impulsive differential equations is emerging as an important area of investigation since such equations appear to represent a natural framework for mathematical modeling of several real phenomena. There have been intensive studies on the qualitative behavior of solutions of the impulsive differential equations. However, many impulsive differential equations cannot be solved analytically or their solving is complicated. In this paper, we represent the algorithm which follows the theory of impulsive differential equations to solve the impulsive differential equations by using the Euler methods. It is clearly shown the impulsive operators k I that acts at the moments k t influence the error. Finally, the better convergence result of the numerical solution is given by solving the numerical examples