Power Management for Deep Submicron Microprocessors

As VLSI technology scales, the enhanced performance of smaller transistors comes at the expense of increased power consumption. In addition to the dynamic power consumed by the circuits there is a tremendous increase in the leakage power consumption which is further exacerbated by the increasing operating temperatures. The total power consumption of modern processors is distributed between the processor core, memory and interconnects. In this research two novel power management techniques are presented targeting the functional units and the global interconnects. First, since most leakage control schemes for processor functional units are based on circuit level techniques, such schemes inherently lack information about the operational profile of higher-level components of the system. This is a barrier to the pivotal task of predicting standby time. Without this prediction, it is extremely difficult to assess the value of any leakage control scheme. Consequently, a methodology that can predict the standby time is highly beneficial in bridging the gap between the information available at the application level and the circuit implementations. In this work, a novel Dynamic Sleep Signal Generator (DSSG) is presented. It utilizes the usage traces extracted from cycle accurate simulations of benchmark programs to predict the long standby periods associated with the various functional units. The DSSG bases its decisions on the current and previous standby state of the functional units to accurately predict the length of the next standby period. The DSSG presents an alternative to Static Sleep Signal Generation (SSSG) based on static counters that trigger the generation of the sleep signal when the functional units idle for a prespecified number of cycles. The test results of the DSSG are obtained by the use of a modified RISC superscalar processor, implemented by SimpleScalar, the most widely accepted open source vehicle for architectural analysis. In addition, the results are further verified by a Simultaneous Multithreading simulator implemented by SMTSIM. Leakage saving results shows an increase of up to 146% in leakage savings using the DSSG versus the SSSG, with an accuracy of 60-80% for predicting long standby periods. Second, chip designers in their effort to achieve timing closure, have focused on achieving the lowest possible interconnect delay through buffer insertion and routing techniques. This approach, though, taxes the power budget of modern ICs, especially those intended for wireless applications. Also, in order to achieve more functionality, die sizes are constantly increasing. This trend is leading to an increase in the average global interconnect length which, in turn, requires more buffers to achieve timing closure. Unconstrained buffering is bound to adversely affect the overall chip performance, if the power consumption is added as a major performance metric. In fact, the number of global interconnect buffers is expected to reach hundreds of thousands to achieve an appropriate timing closure. To mitigate the impact of the power consumed by the interconnect buffers, a power-efficient multi-pin routing technique is proposed in this research. The problem is based on a graph representation of the routing possibilities, including buffer insertion and identifying the least power path between the interconnect source and set of sinks. The novel multi-pin routing technique is tested by applying it to the ISPD and IBM benchmarks to verify the accuracy, complexity, and solution quality. Results obtained indicate that an average power savings as high as 32% for the 130-nm technology is achieved with no impact on the maximum chip frequency

Energy-aware synthesis for networks on chip architectures

The Network on Chip (NoC) paradigm was introduced as a scalable communication infrastructure for future System-on-Chip applications. Designing application specific customized communication architectures is critical for obtaining low power, high performance solutions. Two significant design automation problems are the creation of an optimized configuration, given application requirement the implementation of this on-chip network. Automating the design of on-chip networks requires models for estimating area and energy, algorithms to effectively explore the design space and network component libraries and tools to generate the hardware description. Chip architects are faced with managing a wide range of customization options for individual components, routers and topology. As energy is of paramount importance, the effectiveness of any custom NoC generation approach lies in the availability of good energy models to effectively explore the design space. This thesis describes a complete NoC synthesis flow, called NoCGEN, for creating energy-efficient custom NoC architectures. Three major automation problems are addressed: custom topology generation, energy modeling and generation. An iterative algorithm is proposed to generate application specific point-to-point and packet-switched networks. The algorithm explores the design space for efficient topologies using characterized models and a system-level floorplanner for evaluating placement and wire-energy. Prior to our contribution, building an energy model required careful analysis of transistor or gate implementations. To alleviate the burden, an automated linear regression-based methodology is proposed to rapidly extract energy models for many router designs. The resulting models are cycle accurate with low-complexity and found to be within 10% of gate-level energy simulations, and execute several orders of magnitude faster than gate-level simulations. A hardware description of the custom topology is generated using a parameterizable library and custom HDL generator. Fully reusable and scalable network components (switches, crossbars, arbiters, routing algorithms) are described using a template approach and are used to compose arbitrary topologies. A methodology for building and composing routers and topologies using a template engine is described. The entire flow is implemented as several demonstrable extensible tools with powerful visualization functionality. Several experiments are performed to demonstrate the design space exploration capabilities and compare it against a competing min-cut topology generation algorithm

Minimizing and exploiting leakage in VLSI

Power consumption of VLSI (Very Large Scale Integrated) circuits has been growing at an alarmingly rapid rate. This increase in power consumption, coupled with the increasing demand for portable/hand-held electronics, has made power consumption a dominant concern in the design of VLSI circuits today. Traditionally dynamic (switching) power has dominated the total power consumption of VLSI circuits. However, due to process scaling trends, leakage power has now become a major component of the total power consumption in VLSI circuits. This dissertation explores techniques to reduce leakage, as well as techniques to exploit leakage currents through the use of sub-threshold circuits. This dissertation consists of two studies. In the first study, techniques to reduce leakage are presented. These include a low leakage ASIC design methodology that uses high VT sleep transistors selectively, a methodology that combines input vector control and circuit modification, and a scheme to find the optimum reverse body bias voltage to minimize leakage. As the minimum feature size of VLSI fabrication processes continues to shrink with each successive process generation (along with the value of supply voltage and therefore the threshold voltage of the devices), leakage currents increase exponentially. Leakage currents are hence seen as a necessary evil in traditional VLSI design methodologies. We present an approach to turn this problem into an opportunity. In the second study in this dissertation, we attempt to exploit leakage currents to perform computation. We use sub-threshold digital circuits and come up with ways to get around some of the pitfalls associated with sub-threshold circuit design. These include a technique that uses body biasing adaptively to compensate for Process, Voltage and Temperature (PVT) variations, a design approach that uses asynchronous micro-pipelined Network of Programmable Logic Arrays (NPLAs) to help improve the throughput of sub-threshold designs, and a method to find the optimum supply voltage that minimizes energy consumption in a circuit

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip

The sustained demand for faster, more powerful chips has been met by the availability of chip manufacturing processes allowing for the integration of increasing numbers of computation units onto a single die. The resulting outcome, especially in the embedded domain, has often been called SYSTEM-ON-CHIP (SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC). MPSoC design brings to the foreground a large number of challenges, one of the most prominent of which is the design of the chip interconnection. With a number of on-chip blocks presently ranging in the tens, and quickly approaching the hundreds, the novel issue of how to best provide on-chip communication resources is clearly felt. NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable answer to this design concern. By bringing large-scale networking concepts to the on-chip domain, they guarantee a structured answer to present and future communication requirements. The point-to-point connection and packet switching paradigms they involve are also of great help in minimizing wiring overhead and physical routing issues. However, as with any technology of recent inception, NoC design is still an evolving discipline. Several main areas of interest require deep investigation for NoCs to become viable solutions: • The design of the NoC architecture needs to strike the best tradeoff among performance, features and the tight area and power constraints of the onchip domain. • Simulation and verification infrastructure must be put in place to explore, validate and optimize the NoC performance. • NoCs offer a huge design space, thanks to their extreme customizability in terms of topology and architectural parameters. Design tools are needed to prune this space and pick the best solutions. • Even more so given their global, distributed nature, it is essential to evaluate the physical implementation of NoCs to evaluate their suitability for next-generation designs and their area and power costs. This dissertation performs a design space exploration of network-on-chip architectures, in order to point-out the trade-offs associated with the design of each individual network building blocks and with the design of network topology overall. The design space exploration is preceded by a comparative analysis of state-of-the-art interconnect fabrics with themselves and with early networkon- chip prototypes. The ultimate objective is to point out the key advantages that NoC realizations provide with respect to state-of-the-art communication infrastructures and to point out the challenges that lie ahead in order to make this new interconnect technology come true. Among these latter, technologyrelated challenges are emerging that call for dedicated design techniques at all levels of the design hierarchy. In particular, leakage power dissipation, containment of process variations and of their effects. The achievement of the above objectives was enabled by means of a NoC simulation environment for cycleaccurate modelling and simulation and by means of a back-end facility for the study of NoC physical implementation effects. Overall, all the results provided by this work have been validated on actual silicon layout

Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201