Active Learning of Multiple Source Multiple Destination Topologies

We consider the problem of inferring the topology of a network with $M$ sources and $N$ receivers (hereafter referred to as an $M$-by-$N$ network), by sending probes between the sources and receivers. Prior work has shown that this problem can be decomposed into two parts: first, infer smaller subnetwork components (i.e., $1$-by-$N$'s or $2$-by-$2$'s) and then merge these components to identify the $M$-by-$N$ topology. In this paper, we focus on the second part, which had previously received less attention in the literature. In particular, we assume that a $1$-by-$N$ topology is given and that all $2$-by-$2$ components can be queried and learned using end-to-end probes. The problem is which $2$-by-$2$'s to query and how to merge them with the given $1$-by-$N$, so as to exactly identify the $2$-by-$N$ topology, and optimize a number of performance metrics, including the number of queries (which directly translates into measurement bandwidth), time complexity, and memory usage. We provide a lower bound, $\lceil \frac{N}{2} \rceil$, on the number of $2$-by-$2$'s required by any active learning algorithm and propose two greedy algorithms. The first algorithm follows the framework of multiple hypothesis testing, in particular Generalized Binary Search (GBS), since our problem is one of active learning, from $2$-by-$2$ queries. The second algorithm is called the Receiver Elimination Algorithm (REA) and follows a bottom-up approach: at every step, it selects two receivers, queries the corresponding $2$-by-$2$, and merges it with the given $1$-by-$N$; it requires exactly $N-1$ steps, which is much less than all $\binom{N}{2}$ possible $2$-by-$2$'s. Simulation results over synthetic and realistic topologies demonstrate that both algorithms correctly identify the $2$-by-$N$ topology and are near-optimal, but REA is more efficient in practice

Alternative Multiple Spanning Tree Protocol (AMSTP) for Optical Ethernet Backbones

The availability and affordable cost of Gigabit and 10 Gigabit Ethernet switches has impacted the deployment of metropolitan area networks (MAN) and campus networks. This paper presents a new protocol, the alternative multiple spanning tree protocol (AMSTP), that uses multiple source based spanning trees for backbones using Ethernet switches. It provides minimum paths and more efficient usage of optical backbone infrastructure than currently proposed protocols such as resilient packet ring and rapid spanning tree. The protocol exhibits features similar to MAC routing protocols like Link State Over MAC (LSOM) such as optimum path and effective infrastructure usage, without requiring MAC routing due to the use of the spanning tree protocol paradigm. AMSTP is not restricted to specific topologies such as ring or tree, but performs efficiently in arbitrary topologies. Among the application areas are optical backbones of campus and MANs.Publicad

Hierarchical Up/Down Routing Architecture for Ethernet backbones and campus networks

We describe a new layer two distributed and scalable routing architecture. It uses an automatic hierarchical node identifier assignment mechanism associated to the rapid spanning tree protocol. Enhanced up/down mechanisms are used to prohibit some turns at nodes to break cycles, instead of blocking links like the spannning tree protocol does. The protocol performance is similar or better than other turn prohibition algorithms recently proposed with lower complexity O(Nd) and better scalability. Simulations show that the fraction of prohibited turns over random networks is less than 0.2. The effect of root bridge election on the performance of the protocol is limited both in the random and regular networks studied. The use of hierarchical, tree-descriptive addresses simplifies the routing, and avoids the need of all nodes having a global knowleddge of the network topology. Routing frames through the hierarchical tree at very high speed is possible by progressive decoding of frame destination address, without routing tables or port address learning. Coexistence with standard bridges is achieved using combined devices: bridges that forward the frames having global destination MAC addresses as standard bridges and frames with local MAC frames with the proposed protocol.Publicad

PACE: Simple Multi-hop Scheduling for Single-radio 802.11-based Stub Wireless Mesh Networks

IEEE 802.11-based Stub Wireless Mesh Networks (WMNs) are a cost-effective and flexible solution to extend wired network infrastructures. Yet, they suffer from two major problems: inefficiency and unfairness. A number of approaches have been proposed to tackle these problems, but they are too restrictive, highly complex, or require time synchronization and modifications to the IEEE 802.11 MAC. PACE is a simple multi-hop scheduling mechanism for Stub WMNs overlaid on the IEEE 802.11 MAC that jointly addresses the inefficiency and unfairness problems. It limits transmissions to a single mesh node at each time and ensures that each node has the opportunity to transmit a packet in each network-wide transmission round. Simulation results demonstrate that PACE can achieve optimal network capacity utilization and greatly outperforms state of the art CSMA/CA-based solutions as far as goodput, delay, and fairness are concerned

Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Large scale probabilistic available bandwidth estimation

The common utilization-based definition of available bandwidth and many of the existing tools to estimate it suffer from several important weaknesses: i) most tools report a point estimate of average available bandwidth over a measurement interval and do not provide a confidence interval; ii) the commonly adopted models used to relate the available bandwidth metric to the measured data are invalid in almost all practical scenarios; iii) existing tools do not scale well and are not suited to the task of multi-path estimation in large-scale networks; iv) almost all tools use ad-hoc techniques to address measurement noise; and v) tools do not provide enough flexibility in terms of accuracy, overhead, latency and reliability to adapt to the requirements of various applications. In this paper we propose a new definition for available bandwidth and a novel framework that addresses these issues. We define probabilistic available bandwidth (PAB) as the largest input rate at which we can send a traffic flow along a path while achieving, with specified probability, an output rate that is almost as large as the input rate. PAB is expressed directly in terms of the measurable output rate and includes adjustable parameters that allow the user to adapt to different application requirements. Our probabilistic framework to estimate network-wide probabilistic available bandwidth is based on packet trains, Bayesian inference, factor graphs and active sampling. We deploy our tool on the PlanetLab network and our results show that we can obtain accurate estimates with a much smaller measurement overhead compared to existing approaches.Comment: Submitted to Computer Network