Active electromagnetic suspension system for improved vehicle dynamics

This paper offers motivations for an active suspension system which provides for both additional stability and maneuverability by performing active roll and pitch control during cornering and braking as well as eliminating road irregularities, hence increasing both vehicle and passenger safety and drive comfort. Various technologies are compared to the proposed electromagnetic suspension system which uses a tubular permanent magnet (PM) actuator together with a passive spring. Based upon on-road measurements and results from the literature, several specifications for the design of an electromagnetic suspension system are derived. The measured on-road movement of the passive suspension system is reproduced by electromagnetic actuation on a quarter car setup proving the dynamic capabilities of an electromagnetic suspension system

H2 optimal and μ-synthesis design of quarter car active suspension system

Better journey comfort and controllability of automobile are pursued via car industries with the aid of considering using suspension system which plays a very crucial function in handling and ride comfort characteristics. This paper presents the design of an active suspension of quarter automobile system using robust H2 optimal controller and robust μ - synthesis controller with a second order hydraulic actuator. Parametric uncertainties have been additionally considered to model within the system. Numerical simulation become completed to the designed controllers. Results display that during spite of introducing uncertainties, the designed μ - synthesis controller improves ride consolation and road protecting of the automobile while as compared to the H2 optimal controller

Series active variable geometry suspension application to comfort enhancement

This paper explores the potential of the Series Active Variable Geometry Suspension (SAVGS) for comfort and road holding enhancement. The SAVGS concept introduces significant nonlinearities associated with the rotation of the mechanical link that connects the chassis to the spring-damper unit. Although conventional linearization procedures implemented in multi-body software packages can deal with this configuration, they produce linear models of reduced applicability. To overcome this limitation, an alternative linearization approach based on energy conservation principles is proposed and successfully applied to one corner of the car, thus enabling the use of linear robust control techniques. An H∞ controller is synthesized for this simplified quarter-car linear model and tuned based on the singular value decomposition of the system's transfer matrix. The proposed control is thoroughly tested with one-corner and full-vehicle nonlinear multi-body models. In the SAVGS setup, the actuator appears in series with the passive spring-damper and therefore it would typically be categorized as a low bandwidth or slow active suspension. However, results presented in this paper for an SAVGS-retrofitted Grand Tourer show that this technology has the potential to also improve the high frequency suspension functions such as comfort and road holding

Active suspension control of electric vehicle with in-wheel motors

In-wheel motor (IWM) technology has attracted increasing research interests in recent years due to the numerous advantages it offers. However, the direct attachment of IWMs to the wheels can result in an increase in the vehicle unsprung mass and a significant drop in the suspension ride comfort performance and road holding stability. Other issues such as motor bearing wear motor vibration, air-gap eccentricity and residual unbalanced radial force can adversely influence the motor vibration, passenger comfort and vehicle rollover stability. Active suspension and optimized passive suspension are possible methods deployed to improve the ride comfort and safety of electric vehicles equipped with inwheel motor. The trade-off between ride comfort and handling stability is a major challenge in active suspension design. This thesis investigates the development of novel active suspension systems for successful implementation of IWM technology in electric cars. Towards such aim, several active suspension methods based on robust H∞ control methods are developed to achieve enhanced suspension performance by overcoming the conflicting requirement between ride comfort, suspension deflection and road holding. A novel fault-tolerant H∞ controller based on friction compensation is in the presence of system parameter uncertainties, actuator faults, as well as actuator time delay and system friction is proposed. A friction observer-based Takagi-Sugeno (T-S) fuzzy H∞ controller is developed for active suspension with sprung mass variation and system friction. This method is validated experimentally on a quarter car test rig. The experimental results demonstrate the effectiveness of proposed control methods in improving vehicle ride performance and road holding capability under different road profiles. Quarter car suspension model with suspended shaft-less direct-drive motors has the potential to improve the road holding capability and ride performance. Based on the quarter car suspension with dynamic vibration absorber (DVA) model, a multi-objective parameter optimization for active suspension of IWM mounted electric vehicle based on genetic algorithm (GA) is proposed to suppress the sprung mass vibration, motor vibration, motor bearing wear as well as improving ride comfort, suspension deflection and road holding stability. Then a fault-tolerant fuzzy H∞ control design approach for active suspension of IWM driven electric vehicles in the presence of sprung mass variation, actuator faults and control input constraints is proposed. The T-S fuzzy suspension model is used to cope with the possible sprung mass variation. The output feedback control problem for active suspension system of IWM driven electric vehicles with actuator faults and time delay is further investigated. The suspended motor parameters and vehicle suspension parameters are optimized based on the particle swarm optimization. A robust output feedback H∞ controller is designed to guarantee the system’s asymptotic stability and simultaneously satisfying the performance constraints. The proposed output feedback controller reveals much better performance than previous work when different actuator thrust losses and time delay occurs. The road surface roughness is coupled with in-wheel switched reluctance motor air-gap eccentricity and the unbalanced residual vertical force. Coupling effects between road excitation and in wheel switched reluctance motor (SRM) on electric vehicle ride comfort are also analysed in this thesis. A hybrid control method including output feedback controller and SRM controller are designed to suppress SRM vibration and to prolong the SRM lifespan, while at the same time improving vehicle ride comfort. Then a state feedback H∞ controller combined with SRM controller is designed for in-wheel SRM driven electric vehicle with DVA structure to enhance vehicle and SRM performance. Simulation results demonstrate the effectiveness of DVA structure based active suspension system with proposed control method its ability to significantly improve the road holding capability and ride performance, as well as motor performance

The pitch-heave dynamics of transportation vehicles

The analysis and design of suspensions for vehicles of finite length using pitch-heave models is presented. Dynamic models for the finite length vehicle include the spatial distribution of the guideway input disturbance over the vehicle length, as well as both pitch and heave degrees-of-freedom. Analytical results relate the vehicle front and rear accelerations to the pitch and heave natural frequencies, which are functions of vehicle suspension geometry and mass distribution. The effects of vehicle asymmetry and suspension contact area are evaluated. Design guidelines are presented for the modification of vehicle and suspension parameters to meet alternative ride quality criteria

Adaptive vibration control of a nonlinear quarter car model with an electromagnetic active suspension

The main goal of the active suspension system used in a vehicle is reducing the vehicle vibration. In this study, an adaptive control approach is applied to a nonlinear quarter car model with an active suspension system. An electromagnetic actuator is used in the active suspension system. The attractive aspect of the applied control method is not required to both vehicle parameters and actuator parameters. Using Lyapunov based stability analysis; it is shown that all the signals in the closed loop system are bounded. Hence, the applied controller ensures the vibration reduction of the nonlinear quarter car model. The simulation results show that the applied adaptive controller provide a good ride comfort despite the parametric uncertainties while keeping suspension travel and tire deflection in acceptable limits

Neurofuzzy controller based full vehicle nonlinear active suspension systems

To design a robust controller for active suspension systems is very important for guaranteeing the riding comfort for passengers and road handling quality for a vehicle. In this thesis, the mathematical model of full vehicle nonlinear active suspension systems with hydraulic actuators is derived to take into account all the motions of the vehicle and the nonlinearity behaviours of the active suspension system and hydraulic actuators. Four robust control types are designed and the comparisons among the robustness of those controllers against different disturbance types are investigated to select the best controller among them. The MATLAB SIMULINK toolboxes are used to simulate the proposed controllers with the controlled model and to display the responses of the controlled model under different types of disturbance. The results show that the neurofuzzy controller is more effective and robust than the other controller types. The implementation of the neurofuzzy controller using FPGA boards has been investigated in this work. The Xilinx ISE program is employed to synthesis the VHDL codes that describe the operation of the neurofuzzy controller and to generate the configuration file used to program the FPGA. The ModelSim program is used to simulate the operation of the VHDL codes and to obtain the expected output data of the FPGA boards. To confirm that FPGA the board used as the neurofuzzy controller system operated as expected, a MATLAB script file is used to compare the set of data obtained from the ModelSim program and the set of data obtained from the MATLAB SIMULINK model. The results show that the FPGA board is effective to be used as a neurofuzzy controller for full vehicle nonlinear active suspension systems. The active suspension system has a great performance for vibration isolation. However the main drawback of the active suspension is that it is high energy consumptive. Therefore, to use this suspension system in the proposed model, this drawback should be solved. Electromagnetic actuators are used to convert the vibration energy that arises from the rough road to useful electrical energy to reduce the energy consumption by the active suspension systems. The results show that the electromagnetic devices act as a power generator, i.e. the vibration energy excited by the rough road surface has been converted to a useful electrical energy supply for the actuators. Furthermore, when the nonlinear damper models are replaced by the electromagnetic actuators, riding comfort and the road handling quality are improved. As a result, two targets have been achieved by using hydraulic actuators with electromagnetic suspension systems: increasing fuel economy and improving the vehicle performance

The ride comfort and energy-regenerative characteristics analysis of hydraulic-electricity energy regenerative suspension

For optimization of performances of a hydraulic-electricity energy regenerative suspension (HERS) unit, the tradeoff point was determined based on study of ride comfort and energy-regenerative characteristics of a HERS unit in this study. A HERS unit as a new energy reclaiming suspension device is equipped with an energy-harvesting hydraulic electromagnetic shock absorber (HESA). The HESA together with a quarter car was modeled based on theoretical analysis and experiments, in which the root mean square (RMS) values of the sprung mass vibration acceleration and the recovered power are regarded as the optimization objectives under different road excitation conditions such as the constraints (natural frequency, dynamic displacement, and dynamic load of wheels). The HERS unit was optimized after the relationship between the ride comfort and the energy regeneration was obtained. In comparison with the traditional suspension, the HERS unit may be utilized to improve the ride comfort and meet the vehicle-driving requirements. Moreover, the total input power may be saved by 34-100 W on average while the vibration acceleration is among 0.65-1.06 m/s2. Furthermore, it is verified that the HERS damping force control is the feasible under various load currents