Acquisition scenario analysis for face recognition at a distance

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-17289-2_44Proceedings of 6th International Symposium, ISVC 2010, Las Vegas, NV, (USA)An experimental analysis of three acquisition scenarios for face recognition at a distance is reported, namely: close, medium, and far distance between camera and query face, the three of them considering templates enrolled in controlled conditions. These three representative scenarios are studied using data from the NIST Multiple Biometric Grand Challenge, as the first step in order to understand the main variability factors that affect face recognition at a distance based on realistic yet workable and widely available data. The scenario analysis is conducted quantitatively in two ways. First, we analyze the information content in segmented faces in the different scenarios. Second, we analyze the performance across scenarios of three matchers, one commercial, and two other standard approaches using popular features (PCA and DCT) and matchers (SVM and GMM). The results show to what extent the acquisition setup impacts on the verification performance of face recognition at a distance.This work has been partially supported by projects Bio-Challenge (TEC2009-11186), Contexts (S2009/TIC-1485), TeraSense (CSD2008-00068) and "Cátedra UAM-Telefónica"

Face recognition at a distance: Scenario analysis and applications

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-14883-5_44Proceedings of the International Symposium of Distributed Computing and Artificial Intelligence held in Valencia (Spain).Face recognition is the most popular biometric used in applications at a distance, which range from high security scenarios such as border control to others such as video games. This is a very challenging task since there are many varying factors (illumination, pose, expression, etc.) This paper reports an experimental analysis of three acquisition scenarios for face recognition at a distance, namely: close, medium, and far distance between camera and query face, the three of them considering templates enrolled in controlled conditions. These three representative scenarios are studied using data from the NIST Multiple Biometric Grand Challenge, as the first step in order to understand the main variability factors that affect face recognition at a distance based on realistic yet workable and widely available data. The scenario analysis is conducted quantitatively in two ways. First, an analysis of the information content in segmented faces in the different scenarios. Second, an analysis of the performance across scenarios of three matchers, one commercial, and two other standard approaches using popular features (PCA and DCT) and matchers (SVM and GMM). The results show to what extent the acquisition setup impacts on the verification performance of face recognition at a distance.This work has been supported by project Contexts (S2009/TIC-1485)

Fusion of facial regions using color information in a forensic scenario

Comunicación presentada en: 18th Iberoamerican Congress on Pattern Recognition, CIARP 2013; Havana; Cuba; 20-23 November 2013The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-642-41827-3_50This paper reports an analysis of the benefits of using color information on a region-based face recognition system. Three different color spaces are analysed (RGB, YCbCr, lαβ) in a very challenging scenario matching good quality mugshot images against video surveillance images. This scenario is of special interest for forensics, where examiners carry out a comparison of two face images using the global information of the faces, but paying special attention to each individual facial region (eyes, nose, mouth, etc.). This work analyses the discriminative power of 15 facial regions comparing both the grayscale and color information. Results show a significant improvement of performance when fusing several regions of the face compared to just using the whole face image. A further improvement of performance is achieved when color information is consideredThis work has been partially supported by contract with Spanish Guardia Civil and projects BBfor2 (FP7-ITN-238803), bio-Challenge (TEC2009-11186), Bio Shield (TEC2012-34881), Contexts (S2009/TIC-1485), TeraSense (CSD2008-00068) and "Cátedra UAM-Telefónica

Novel methods for real-time 3D facial recognition

In this paper we discuss our approach to real-time 3D face recognition. We argue the need for real time operation in a realistic scenario and highlight the required pre- and post-processing operations for effective 3D facial recognition. We focus attention to some operations including face and eye detection, and fast post-processing operations such as hole filling, mesh smoothing and noise removal. We consider strategies for hole filling such as bilinear and polynomial interpolation and Laplace and conclude that bilinear interpolation is preferred. Gaussian and moving average smoothing strategies are compared and it is shown that moving average can have the edge over Gaussian smoothing. The regions around the eyes normally carry a considerable amount of noise and strategies for replacing the eyeball with a spherical surface and the use of an elliptical mask in conjunction with hole filling are compared. Results show that the elliptical mask with hole filling works well on face models and it is simpler to implement. Finally performance issues are considered and the system has demonstrated to be able to perform real-time 3D face recognition in just over 1s 200ms per face model for a small database

Fast and Accurate 3D Face Recognition Using Registration to an Intrinsic Coordinate System and Fusion of Multiple Region classifiers

In this paper we present a new robust approach for 3D face registration to an intrinsic coordinate system of the face. The intrinsic coordinate system is defined by the vertical symmetry plane through the nose, the tip of the nose and the slope of the bridge of the nose. In addition, we propose a 3D face classifier based on the fusion of many dependent region classifiers for overlapping face regions. The region classifiers use PCA-LDA for feature extraction and the likelihood ratio as a matching score. Fusion is realised using straightforward majority voting for the identification scenario. For verification, a voting approach is used as well and the decision is defined by comparing the number of votes to a threshold. Using the proposed registration method combined with a classifier consisting of 60 fused region classifiers we obtain a 99.0% identification rate on the all vs first identification test of the FRGC v2 data. A verification rate of 94.6% at FAR=0.1% was obtained for the all vs all verification test on the FRGC v2 data using fusion of 120 region classifiers. The first is the highest reported performance and the second is in the top-5 of best performing systems on these tests. In addition, our approach is much faster than other methods, taking only 2.5 seconds per image for registration and less than 0.1 ms per comparison. Because we apply feature extraction using PCA and LDA, the resulting template size is also very small: 6 kB for 60 region classifiers

CORe50: a New Dataset and Benchmark for Continuous Object Recognition

Continuous/Lifelong learning of high-dimensional data streams is a challenging research problem. In fact, fully retraining models each time new data become available is infeasible, due to computational and storage issues, while na\"ive incremental strategies have been shown to suffer from catastrophic forgetting. In the context of real-world object recognition applications (e.g., robotic vision), where continuous learning is crucial, very few datasets and benchmarks are available to evaluate and compare emerging techniques. In this work we propose a new dataset and benchmark CORe50, specifically designed for continuous object recognition, and introduce baseline approaches for different continuous learning scenarios

On Acquisition and Analysis of a Dataset Comprising of Gait, Ear and Semantic data

In outdoor scenarios such as surveillance where there is very little control over the environments, complex computer vision algorithms are often required for analysis. However constrained environments, such as walkways in airports where the surroundings and the path taken by individuals can be controlled, provide an ideal application for such systems. Figure 1.1 depicts an idealised constrained environment. The path taken by the subject is restricted to a narrow path and once inside is in a volume where lighting and other conditions are controlled to facilitate biometric analysis. The ability to control the surroundings and the flow of people greatly simplifes the computer vision task, compared to typical unconstrained environments. Even though biometric datasets with greater than one hundred people are increasingly common, there is still very little known about the inter and intra-subject variation in many biometrics. This information is essential to estimate the recognition capability and limits of automatic recognition systems. In order to accurately estimate the inter- and the intra- class variance, substantially larger datasets are required [40]. Covariates such as facial expression, headwear, footwear type, surface type and carried items are attracting increasing attention; although considering the potentially large impact on an individuals biometrics, large trials need to be conducted to establish how much variance results. This chapter is the first description of the multibiometric data acquired using the University of Southampton's Multi-Biometric Tunnel [26, 37]; a biometric portal using automatic gait, face and ear recognition for identification purposes. The tunnel provides a constrained environment and is ideal for use in high throughput security scenarios and for the collection of large datasets. We describe the current state of data acquisition of face, gait, ear, and semantic data and present early results showing the quality and range of data that has been collected. The main novelties of this dataset in comparison with other multi-biometric datasets are: 1. gait data exists for multiple views and is synchronised, allowing 3D reconstruction and analysis; 2. the face data is a sequence of images allowing for face recognition in video; 3. the ear data is acquired in a relatively unconstrained environment, as a subject walks past; and 4. the semantic data is considerably more extensive than has been available previously. We shall aim to show the advantages of this new data in biometric analysis, though the scope for such analysis is considerably greater than time and space allows for here

Face Identification and Clustering

In this thesis, we study two problems based on clustering algorithms. In the first problem, we study the role of visual attributes using an agglomerative clustering algorithm to whittle down the search area where the number of classes is high to improve the performance of clustering. We observe that as we add more attributes, the clustering performance increases overall. In the second problem, we study the role of clustering in aggregating templates in a 1:N open set protocol using multi-shot video as a probe. We observe that by increasing the number of clusters, the performance increases with respect to the baseline and reaches a peak, after which increasing the number of clusters causes the performance to degrade. Experiments are conducted using recently introduced unconstrained IARPA Janus IJB-A, CS2, and CS3 face recognition datasets