Secrecy Energy Efficiency of MIMOME Wiretap Channels with Full-Duplex Jamming

Full-duplex (FD) jamming transceivers are recently shown to enhance the information security of wireless communication systems by simultaneously transmitting artificial noise (AN) while receiving information. In this work, we investigate if FD jamming can also improve the systems secrecy energy efficiency (SEE) in terms of securely communicated bits-per- Joule, when considering the additional power used for jamming and self-interference (SI) cancellation. Moreover, the degrading effect of the residual SI is also taken into account. In this regard, we formulate a set of SEE maximization problems for a FD multiple-input-multiple-output multiple-antenna eavesdropper (MIMOME) wiretap channel, considering both cases where exact or statistical channel state information (CSI) is available. Due to the intractable problem structure, we propose iterative solutions in each case with a proven convergence to a stationary point. Numerical simulations indicate only a marginal SEE gain, through the utilization of FD jamming, for a wide range of system conditions. However, when SI can efficiently be mitigated, the observed gain is considerable for scenarios with a small distance between the FD node and the eavesdropper, a high Signal-to-noise ratio (SNR), or for a bidirectional FD communication setup.Comment: IEEE Transactions on Communication

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

Secure and Private Cloud Storage Systems with Random Linear Fountain Codes

An information theoretic approach to security and privacy called Secure And Private Information Retrieval (SAPIR) is introduced. SAPIR is applied to distributed data storage systems. In this approach, random combinations of all contents are stored across the network. Our coding approach is based on Random Linear Fountain (RLF) codes. To retrieve a content, a group of servers collaborate with each other to form a Reconstruction Group (RG). SAPIR achieves asymptotic perfect secrecy if at least one of the servers within an RG is not compromised. Further, a Private Information Retrieval (PIR) scheme based on random queries is proposed. The PIR approach ensures the users privately download their desired contents without the servers knowing about the requested contents indices. The proposed scheme is adaptive and can provide privacy against a significant number of colluding servers.Comment: 8 pages, 2 figure

Throughput Improvement by Mode Selection in Hybrid Duplex Wireless Networks

Hybrid duplex wireless networks, use half duplex (HD) as well as full duplex (FD) modes to utilize the advantages of both technologies. This paper tries to determine the proportion of the network nodes that should be in HD or FD modes in such networks, to maximize the overall throughput of all FD and HD nodes. Here, by assuming imperfect self-interference cancellation (SIC) and using ALOHA protocol, the local optimum densities of FD, HD and idle nodes are obtained in a given time slot, using Karush–Kuhn–Tucker (KKT) conditions as well as stochastic geometry tool. We also obtain the sub-optimal value of the signal-to-interference ratio (SIR) threshold constrained by fixed node densities, using the steepest descent method in order to maximize the network throughput. The results show that in such networks, the proposed hybrid duplex mode selection scheme improves the level of throughput. The results also indicate the effect of imperfect SIC on reducing the throughput. Moreover, it is demonstrated that by choosing an optimal SIR threshold for mode selection process, the achievable throughput in such networks can increase by around 5%

Secrecy Enhancement in Cooperative Relaying Systems

Cooperative communications is obviously an evolution in wireless networks due to its noticeable advantages such as increasing the coverage as well as combating fading and shadowing effects. However, the broadcast characteristic of a wireless medium which is exploited in cooperative communications leads to a variety of security vulnerabilities. As cooperative communication networks are globally expanded, they expose to security attacks and threats more than ever. Primarily, researchers have focused on upper layers of network architectures to meet the requirements for secure cooperative transmission while the upper-layer security solutions are incapable of combating a number of security threats, e.g., jamming attacks. To address this issue, physical-layer security has been recommended as a complementary solution in the literature. In this thesis, physical layer attacks of the cooperative communication systems are studied, and corresponding security techniques including cooperative jamming, beamforming and diversity approaches are investigated. In addition, a novel security solution for a two-hop decode-and-forward relaying system is presented where the transmitters insert a random phase shift to the modulated data of each hop. The random phase shift is created based on a shared secret among communicating entities. Thus, the injected phase shift confuses the eavesdropper and secrecy capacity improves. Furthermore, a cooperative jamming strategy for multi-hop decode-and-forward relaying systems is presented where multiple non-colluding illegitimate nodes can overhear the communication. The jamming signal is created by the transmitter of each hop while being sent with the primary signal. The jamming signal is known at the intended receiver as it is according to a secret common knowledge between the communicating entities. Hence, artificial noise misleads the eavesdroppers, and decreases their signal-to-noise-ratio. As a result, secrecy capacity of the system is improved. Finally, power allocation among friendly jamming and main signal is proposed to ensure that suggested scheme enhances secrecy

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Cross Layer Coding Schemes for Broadcasting and Relaying

This dissertation is divided into two main topics. In the first topic, we study the joint source-channel coding problem of transmitting an analog source over a Gaussian channel in two cases - (i) the presence of interference known only to the transmitter and (ii) in the presence of side information about the source known only to the receiver. We introduce hybrid digital analog forms of the Costa and Wyner-Ziv coding schemes. We present random coding based schemes in contrast to lattice based schemes proposed by Kochman and Zamir. We also discuss superimposed digital and analog schemes for the above problems which show that there are infinitely many schemes for achieving the optimal distortion for these problems. This provides an extension of the schemes proposed by Bross and others to the interference/source side information case. The result of this study shows that the proposed hybrid digital analog schemes are more robust to a mismatch in channel signal-to-noise ratio (SNR), than pure separate source coding followed by channel coding solutions. We then discuss applications of the hybrid digital analog schemes for transmitting under a channel SNR mismatch and for broadcasting a Gaussian source with bandwidth compression. We also study applications of joint source-channel coding schemes for a cognitive setup and also for the setup of transmitting an analog Gaussian source over a Gaussian channel, in the presence of an eavesdropper. In the next topic, we consider joint physical layer coding and network coding solutions for bi-directional relaying. We consider a communication system where two transmitters wish to exchange information through a central relay. The transmitter and relay nodes exchange data over synchronized, average power constrained additive white Gaussian noise channels. We propose structured coding schemes using lattices for this problem. We study two decoding approaches, namely lattice decoding and minimum angle decoding. Both the decoding schemes can be shown to achieve the upper bound at high SNRs. The proposed scheme can be thought of as a joint physical layer, network layer code which outperforms other recently proposed analog network coding schemes. We also study extensions of the bi-directional relay for the case with asymmetric channel links and also for the multi-hop case. The result of this study shows that structured coding schemes using lattices perform close to the upper bound for the above communication system models