2,619 research outputs found
Secure Distributed Dynamic State Estimation in Wide-Area Smart Grids
Smart grid is a large complex network with a myriad of vulnerabilities,
usually operated in adversarial settings and regulated based on estimated
system states. In this study, we propose a novel highly secure distributed
dynamic state estimation mechanism for wide-area (multi-area) smart grids,
composed of geographically separated subregions, each supervised by a local
control center. We firstly propose a distributed state estimator assuming
regular system operation, that achieves near-optimal performance based on the
local Kalman filters and with the exchange of necessary information between
local centers. To enhance the security, we further propose to (i) protect the
network database and the network communication channels against attacks and
data manipulations via a blockchain (BC)-based system design, where the BC
operates on the peer-to-peer network of local centers, (ii) locally detect the
measurement anomalies in real-time to eliminate their effects on the state
estimation process, and (iii) detect misbehaving (hacked/faulty) local centers
in real-time via a distributed trust management scheme over the network. We
provide theoretical guarantees regarding the false alarm rates of the proposed
detection schemes, where the false alarms can be easily controlled. Numerical
studies illustrate that the proposed mechanism offers reliable state estimation
under regular system operation, timely and accurate detection of anomalies, and
good state recovery performance in case of anomalies
The Impact of Stealthy Attacks on Smart Grid Performance: Tradeoffs and Implications
The smart grid is envisioned to significantly enhance the efficiency of
energy consumption, by utilizing two-way communication channels between
consumers and operators. For example, operators can opportunistically leverage
the delay tolerance of energy demands in order to balance the energy load over
time, and hence, reduce the total operational cost. This opportunity, however,
comes with security threats, as the grid becomes more vulnerable to
cyber-attacks. In this paper, we study the impact of such malicious
cyber-attacks on the energy efficiency of the grid in a simplified setup. More
precisely, we consider a simple model where the energy demands of the smart
grid consumers are intercepted and altered by an active attacker before they
arrive at the operator, who is equipped with limited intrusion detection
capabilities. We formulate the resulting optimization problems faced by the
operator and the attacker and propose several scheduling and attack strategies
for both parties. Interestingly, our results show that, as opposed to
facilitating cost reduction in the smart grid, increasing the delay tolerance
of the energy demands potentially allows the attacker to force increased costs
on the system. This highlights the need for carefully constructed and robust
intrusion detection mechanisms at the operator.Comment: Technical report - this work was accepted to IEEE Transactions on
Control of Network Systems, 2016. arXiv admin note: substantial text overlap
with arXiv:1209.176
Recommended from our members
Survey in Smart Grid and Smart Home Security: Issues, Challenges and Countermeasures
The electricity industry is now at the verge of a new era. An era that promises, through the evolution of the existing electrical grids to Smart Grids, more efficient and effective power management, better reliability, reduced production costs and more environmentally friendly energy generation. Numerous initiatives across the globe, led by both industry and academia, reflect the mounting interest around the enormous benefits but also the great risks introduced by this evolution. This paper focuses on issues related to the security of the Smart Grid and the Smart Home, which we present as an integral part of the Smart Grid. Based on several scenarios we aim to present some of the most representative threats to the Smart Home / Smart Grid environment. The threats detected are categorized according to specific security goals set for the Smart Home/Smart Grid environment and their impact on the overall system security is evaluated. A review of contemporary literature is then conducted with the aim of presenting promising security countermeasures with respect to the identified specific security goals for each presented scenario. An effort to shed light on open issues and future research directions concludes the paper
Modeling and Detecting False Data Injection Attacks against Railway Traction Power Systems
Modern urban railways extensively use computerized sensing and control
technologies to achieve safe, reliable, and well-timed operations. However, the
use of these technologies may provide a convenient leverage to cyber-attackers
who have bypassed the air gaps and aim at causing safety incidents and service
disruptions. In this paper, we study false data injection (FDI) attacks against
railways' traction power systems (TPSes). Specifically, we analyze two types of
FDI attacks on the train-borne voltage, current, and position sensor
measurements - which we call efficiency attack and safety attack -- that (i)
maximize the system's total power consumption and (ii) mislead trains' local
voltages to exceed given safety-critical thresholds, respectively. To
counteract, we develop a global attack detection (GAD) system that serializes a
bad data detector and a novel secondary attack detector designed based on
unique TPS characteristics. With intact position data of trains, our detection
system can effectively detect the FDI attacks on trains' voltage and current
measurements even if the attacker has full and accurate knowledge of the TPS,
attack detection, and real-time system state. In particular, the GAD system
features an adaptive mechanism that ensures low false positive and negative
rates in detecting the attacks under noisy system measurements. Extensive
simulations driven by realistic running profiles of trains verify that a TPS
setup is vulnerable to the FDI attacks, but these attacks can be detected
effectively by the proposed GAD while ensuring a low false positive rate.Comment: IEEE/IFIP DSN-2016 and ACM Trans. on Cyber-Physical System
Bibliographical review on cyber attacks from a control oriented perspective
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented.Peer ReviewedPostprint (author's final draft
Graphical Convolution Network Based Semi-Supervised Methods for Detecting PMU Data Manipulation Attacks
With the integration of information and communications technologies (ICTs) into the power grid, electricity infrastructures are gradually transformed towards smart grid and power systems become more open to and accessible from outside networks. With ubiquitous sensors, computers and communication networks, modern power systems have become complicated cyber-physical systems. The cyber security issues and the impact of potential attacks on the smart grid have become an important issue. Among these attacks, false data injection attack (FDIA) becomes a growing concern because of its varied types and impacts. Several detection algorithms have been developed in the last few years, which were model-based, trajectory prediction-based or learning-based methods.
Phasor measurement units (PMUs) and supervisory control and data acquisition (SCADA) system work together to monitor the power system operation. The unsecured devices could offer opportunities to adversaries to compromise the system. In the literature review part of this thesis, the main methods are compared considering computing accuracy and complexity. Most work about PMUs ignored the reality that the number of PMUs installed in a power system is limited to realize observability because of high installing cost. Therefore, based on observable truth of PMU and the topology structure of power system, the graph convolution network (GCN) is proposed in this thesis. The main idea is using selected features to define violated PMU, and GCN is used to classify susceptible violated nodes and normal nodes. The basic detection method is introduced at first. And then the calculation process of neural network and Fourier transform are described with more details about graph convolution network. Later, the proposed detection mechanism and algorithm are introduced. Finally, the simulation results are given and analyzed
- …