Architectural level delay and leakage power modelling of manufacturing process variation

PhD ThesisThe effect of manufacturing process variations has become a major issue regarding the estimation of circuit delay and power dissipation, and will gain more importance in the future as device scaling continues in order to satisfy market place demands for circuits with greater performance and functionality per unit area. Statistical modelling and analysis approaches have been widely used to reflect the effects of a variety of variational process parameters on system performance factor which will be described as probability density functions (PDFs). At present most of the investigations into statistical models has been limited to small circuits such as a logic gate. However, the massive size of present day electronic systems precludes the use of design techniques which consider a system to comprise these basic gates, as this level of design is very inefficient and error prone. This thesis proposes a methodology to bring the effects of process variation from transistor level up to architectural level in terms of circuit delay and leakage power dissipation. Using a first order canonical model and statistical analysis approach, a statistical cell library has been built which comprises not only the basic gate cell models, but also more complex functional blocks such as registers, FIFOs, counters, ALUs etc. Furthermore, other sensitive factors to the overall system performance, such as input signal slope, output load capacitance, different signal switching cases and transition types are also taken into account for each cell in the library, which makes it adaptive to an incremental circuit design. The proposed methodology enables an efficient analysis of process variation effects on system performance with significantly reduced computation time compared to the Monte Carlo simulation approach. As a demonstration vehicle for this technique, the delay and leakage power distributions of a 2-stage asynchronous micropipeline circuit has been simulated using this cell library. The experimental results show that the proposed method can predict the delay and leakage power distribution with less than 5% error and at least 50,000 times faster computation time compare to 5000-sample SPICE based Monte Carlo simulation. The methodology presented here for modelling process variability plays a significant role in Design for Manufacturability (DFM) by quantifying the direct impact of process variations on system performance. The advantages of being able to undertake this analysis at a high level of abstraction and thus early in the design cycle are two fold. First, if the predicted effects of process variation render the circuit performance to be outwith specification, design modifications can be readily incorporated to rectify the situation. Second, knowing what the acceptable limits of process variation are to maintain design performance within its specification, informed choices can be made regarding the implementation technology and manufacturer selected to fabricate the design

Hybrid Gate-Level Leakage Model for Monte Carlo Analysis on Multiple GPUs

This paper proposes a hybrid gate-level leakage model for the use with the Monte Carlo (MC) analysis approach, which combines a lookup table (LUT) model with a first-order exponential-polynomial model (first-order model, herein). For the process parameters having strong nonlinear relationships with the logarithm of leakage current, the proposed model uses the LUT approach for the sake of modeling accuracy. For the other process parameters, it uses the first-order model for increased efficiency. During the library characterization for each type of logic gates, the proposed approach determines the process parameters for which it will use the LUT model. And, it determines the number of LUT data points, which can maximize analysis efficiency with acceptable accuracy, based on the user-defined threshold. The proposed model was implemented for gate-level MC leakage analysis using three graphic processing units. In experiments, the proposed approach exhibited the average errors of <5% in both mean and standard deviation with reference to SPICE-level MC leakage analysis. In comparison, MC analysis with the first-order model exhibited more than 90% errors. In CPU times, the proposed hybrid approach took only two to five times longer runtimes. In comparison with the full LUT model, the proposed hybrid model was up to one hundred times faster while increasing the average errors by only 3%. Finally, the proposed approach completed a leakage analysis of an OpenSparc T2 core of 4.5 million gates with a runtime of <5 min.1150Ysciescopu

AI/ML Algorithms and Applications in VLSI Design and Technology

An evident challenge ahead for the integrated circuit (IC) industry in the nanometer regime is the investigation and development of methods that can reduce the design complexity ensuing from growing process variations and curtail the turnaround time of chip manufacturing. Conventional methodologies employed for such tasks are largely manual; thus, time-consuming and resource-intensive. In contrast, the unique learning strategies of artificial intelligence (AI) provide numerous exciting automated approaches for handling complex and data-intensive tasks in very-large-scale integration (VLSI) design and testing. Employing AI and machine learning (ML) algorithms in VLSI design and manufacturing reduces the time and effort for understanding and processing the data within and across different abstraction levels via automated learning algorithms. It, in turn, improves the IC yield and reduces the manufacturing turnaround time. This paper thoroughly reviews the AI/ML automated approaches introduced in the past towards VLSI design and manufacturing. Moreover, we discuss the scope of AI/ML applications in the future at various abstraction levels to revolutionize the field of VLSI design, aiming for high-speed, highly intelligent, and efficient implementations

Parametric Yield of VLSI Systems under Variability: Analysis and Design Solutions

Variability has become one of the vital challenges that the designers of integrated circuits encounter. variability becomes increasingly important. Imperfect manufacturing process manifest itself as variations in the design parameters. These variations and those in the operating environment of VLSI circuits result in unexpected changes in the timing, power, and reliability of the circuits. With scaling transistor dimensions, process and environmental variations become significantly important in the modern VLSI design. A smaller feature size means that the physical characteristics of a device are more prone to these unaccounted-for changes. To achieve a robust design, the random and systematic fluctuations in the manufacturing process and the variations in the environmental parameters should be analyzed and the impact on the parametric yield should be addressed. This thesis studies the challenges and comprises solutions for designing robust VLSI systems in the presence of variations. Initially, to get some insight into the system design under variability, the parametric yield is examined for a small circuit. Understanding the impact of variations on the yield at the circuit level is vital to accurately estimate and optimize the yield at the system granularity. Motivated by the observations and results, found at the circuit level, statistical analyses are performed, and solutions are proposed, at the system level of abstraction, to reduce the impact of the variations and increase the parametric yield. At the circuit level, the impact of the supply and threshold voltage variations on the parametric yield is discussed. Here, a design centering methodology is proposed to maximize the parametric yield and optimize the power-performance trade-off under variations. In addition, the scaling trend in the yield loss is studied. Also, some considerations for design centering in the current and future CMOS technologies are explored. The investigation, at the circuit level, suggests that the operating temperature significantly affects the parametric yield. In addition, the yield is very sensitive to the magnitude of the variations in supply and threshold voltage. Therefore, the spatial variations in process and environmental variations make it necessary to analyze the yield at a higher granularity. Here, temperature and voltage variations are mapped across the chip to accurately estimate the yield loss at the system level. At the system level, initially the impact of process-induced temperature variations on the power grid design is analyzed. Also, an efficient verification method is provided that ensures the robustness of the power grid in the presence of variations. Then, a statistical analysis of the timing yield is conducted, by taking into account both the process and environmental variations. By considering the statistical profile of the temperature and supply voltage, the process variations are mapped to the delay variations across a die. This ensures an accurate estimation of the timing yield. In addition, a method is proposed to accurately estimate the power yield considering process-induced temperature and supply voltage variations. This helps check the robustness of the circuits early in the design process. Lastly, design solutions are presented to reduce the power consumption and increase the timing yield under the variations. In the first solution, a guideline for floorplaning optimization in the presence of temperature variations is offered. Non-uniformity in the thermal profiles of integrated circuits is an issue that impacts the parametric yield and threatens chip reliability. Therefore, the correlation between the total power consumption and the temperature variations across a chip is examined. As a result, floorplanning guidelines are proposed that uses the correlation to efficiently optimize the chip's total power and takes into account the thermal uniformity. The second design solution provides an optimization methodology for assigning the power supply pads across the chip for maximizing the timing yield. A mixed-integer nonlinear programming (MINLP) optimization problem, subject to voltage drop and current constraint, is efficiently solved to find the optimum number and location of the pads

Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs

The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies. The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification

Variability-Aware VLSI Design Automation For Nanoscale Technologies

As technology scaling enters the nanometer regime, design of large scale ICs gets more challenging due to shrinking feature sizes and increasing design complexity. Aggressive scaling causes significant degradation in reliability, increased susceptibility to fabrication and environmental randomness and increased dynamic and leakage power dissipation. In this work, we investigate these scaling issues in large scale integrated systems. This dissertation proposes to develop variability-aware design methodologies by proposing design analysis, design-time optimization, post-silicon tunability and runtime-adaptivity based optimization techniques for handling variability. We discuss our research in the area of variability-aware analysis, specifically focusing on the problem of statistical timing analysis. The first technique presents the concept of error budgeting that achieves significant runtime speedups during statistical timing analysis. The second work presents a general framework for non-linear non-Gaussian statistical timing analysis considering correlations. Further, we present our work on design-time optimization schemes that are applicable during physical synthesis. Firstly, we present a buffer insertion technique that considers wire-length uncertainty and proposes algorithms to perform probabilistic buffer insertion. Secondly, we present a stochastic optimization framework based on Monte-Carlo technique considering fabrication variability. This optimization framework can be applied to problems that can be modeled as linear programs without without imposing any assumptions on the nature of the variability. Subsequently, we present our work on post-silicon tunability based design optimization. This work presents a design management framework that can be used to balance the effort spent on pre-silicon (through gate sizing) and post-silicon optimization (through tunable clock-tree buffers) while maximizing the yield gains. Lastly, we present our work on variability-aware runtime optimization techniques. We look at the problem of runtime supply voltage scaling for dynamic power optimization, and propose a framework to consider the impact of variability on the reliability of such designs. We propose a probabilistic design synthesis technique where reliability of the design is a primary optimization metric

Statistical Yield Analysis and Design for Nanometer VLSI

Process variability is the pivotal factor impacting the design of high yield integrated circuits and systems in deep sub-micron CMOS technologies. The electrical and physical properties of transistors and interconnects, the building blocks of integrated circuits, are prone to significant variations that directly impact the performance and power consumption of the fabricated devices, severely impacting the manufacturing yield. However, the large number of the transistors on a single chip adds even more challenges for the analysis of the variation effects, a critical task in diagnosing the cause of failure and designing for yield. Reliable and efficient statistical analysis methodologies in various design phases are key to predict the yield before entering such an expensive fabrication process. In this thesis, the impacts of process variations are examined at three different levels: device, circuit, and micro-architecture. The variation models are provided for each level of abstraction, and new methodologies are proposed for efficient statistical analysis and design under variation. At the circuit level, the variability analysis of three crucial sub-blocks of today's system-on-chips, namely, digital circuits, memory cells, and analog blocks, are targeted. The accurate and efficient yield analysis of circuits is recognized as an extremely challenging task within the electronic design automation community. The large scale of the digital circuits, the extremely high yield requirement for memory cells, and the time-consuming analog circuit simulation are major concerns in the development of any statistical analysis technique. In this thesis, several sampling-based methods have been proposed for these three types of circuits to significantly improve the run-time of the traditional Monte Carlo method, without compromising accuracy. The proposed sampling-based yield analysis methods benefit from the very appealing feature of the MC method, that is, the capability to consider any complex circuit model. However, through the use and engineering of advanced variance reduction and sampling methods, ultra-fast yield estimation solutions are provided for different types of VLSI circuits. Such methods include control variate, importance sampling, correlation-controlled Latin Hypercube Sampling, and Quasi Monte Carlo. At the device level, a methodology is proposed which introduces a variation-aware design perspective for designing MOS devices in aggressively scaled geometries. The method introduces a yield measure at the device level which targets the saturation and leakage currents of an MOS transistor. A statistical method is developed to optimize the advanced doping profiles and geometry features of a device for achieving a maximum device-level yield. Finally, a statistical thermal analysis framework is proposed. It accounts for the process and thermal variations simultaneously, at the micro-architectural level. The analyzer is developed, based on the fact that the process variations lead to uncertain leakage power sources, so that the thermal profile, itself, would have a probabilistic nature. Therefore, by a co-process-thermal-leakage analysis, a more reliable full-chip statistical leakage power yield is calculated

Process Variation Aware DRAM (Dynamic Random Access Memory) Design Using Block-Based Adaptive Body Biasing Algorithm

Large dense structures like DRAMs (Dynamic Random Access Memory) are particularly susceptible to process variation, which can lead to variable latencies in different memory arrays. However, very little work exists on variation studies in DRAMs. This is due to the fact that DRAMs were traditionally placed off-chip and their latency changes due to process variation did not impact the overall processor performance. However, emerging technology trends like three-dimensional integration, use of sophisticated memory controllers, and continued scaling of technology node, substantially reduce DRAM access latency. Hence, future technology nodes will see widespread adoption of embedded DRAMs. This makes process variation a critical upcoming challenge in DRAMs that must be addressed in current and forthcoming technology generations. In this paper, techniques for modeling the effect of random, as well as spatial variation, in large DRAM array structures are presented. Sensitivity-based gate level process variation models combined with statistical timing analysis are used to estimate the impact of process variation on the DRAM performance and leakage power. A simulated annealing-based Vth assignment algorithm using adaptive body biasing is proposed in this thesis to improve the yield of DRAM structures. By applying the algorithm on a 1GB DRAM array, an average of 14.66% improvement in the DRAM yield is obtained

Efficient Monte Carlo Based Methods for Variability Aware Analysis and Optimization of Digital Circuits.

Process variability is of increasing concern in modern nanometer-scale CMOS. The suitability of Monte Carlo based algorithms for efficient analysis and optimization of digital circuits under variability is explored in this work. Random sampling based Monte Carlo techniques incur high cost of computation, due to the large sample size required to achieve target accuracy. This motivates the need for intelligent sample selection techniques to reduce the number of samples. As these techniques depend on information about the system under analysis, there is a need to tailor the techniques to fit the specific application context. We propose efficient smart sampling based techniques for timing and leakage power consumption analysis of digital circuits. For the case of timing analysis, we show that the proposed method requires 23.8X fewer samples on average to achieve comparable accuracy as a random sampling approach, for benchmark circuits studied. It is further illustrated that the parallelism available in such techniques can be exploited using parallel machines, especially Graphics Processing Units. Here, we show that SH-QMC implemented on a Multi GPU is twice as fast as a single STA on a CPU for benchmark circuits considered. Next we study the possibility of using such information from statistical analysis to optimize digital circuits under variability, for example to achieve minimum area on silicon though gate sizing while meeting a timing constraint. Though several techniques to optimize circuits have been proposed in literature, it is not clear how much gains are obtained in these approaches specifically through utilization of statistical information. Therefore, an effective lower bound computation technique is proposed to enable efficient comparison of statistical design optimization techniques. It is shown that even techniques which use only limited statistical information can achieve results to within 10% of the proposed lower bound. We conclude that future optimization research should shift focus from use of more statistical information to achieving more efficiency and parallelism to obtain speed ups.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/78936/1/tvvin_1.pd

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements