12,350 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Reflection-Aware Sound Source Localization
We present a novel, reflection-aware method for 3D sound localization in
indoor environments. Unlike prior approaches, which are mainly based on
continuous sound signals from a stationary source, our formulation is designed
to localize the position instantaneously from signals within a single frame. We
consider direct sound and indirect sound signals that reach the microphones
after reflecting off surfaces such as ceilings or walls. We then generate and
trace direct and reflected acoustic paths using inverse acoustic ray tracing
and utilize these paths with Monte Carlo localization to estimate a 3D sound
source position. We have implemented our method on a robot with a cube-shaped
microphone array and tested it against different settings with continuous and
intermittent sound signals with a stationary or a mobile source. Across
different settings, our approach can localize the sound with an average
distance error of 0.8m tested in a room of 7m by 7m area with 3m height,
including a mobile and non-line-of-sight sound source. We also reveal that the
modeling of indirect rays increases the localization accuracy by 40% compared
to only using direct acoustic rays.Comment: Submitted to ICRA 2018. The working video is available at
(https://youtu.be/TkQ36lMEC-M
SRA: Fast Removal of General Multipath for ToF Sensors
A major issue with Time of Flight sensors is the presence of multipath
interference. We present Sparse Reflections Analysis (SRA), an algorithm for
removing this interference which has two main advantages. First, it allows for
very general forms of multipath, including interference with three or more
paths, diffuse multipath resulting from Lambertian surfaces, and combinations
thereof. SRA removes this general multipath with robust techniques based on
optimization. Second, due to a novel dimension reduction, we are able to
produce a very fast version of SRA, which is able to run at frame rate.
Experimental results on both synthetic data with ground truth, as well as real
images of challenging scenes, validate the approach
The modeling of diffuse boundaries in the 2-D digital waveguide mesh
The digital waveguide mesh can be used to simulate the propagation of sound waves in an acoustic system. The accurate simulation of the acoustic characteristics of boundaries within such a system is an important part of the model. One significant property of an acoustic boundary is its diffusivity. Previous approaches to simulating diffuse boundaries in a digital waveguide mesh are effective but exhibit limitations and have not been analyzed in detail. An improved technique is presented here that simulates diffusion at boundaries and offers a high degree of control and consistency. This technique works by rotating wavefronts as they pass through a special diffusing layer adjacent to the boundary. The waves are rotated randomly according to a chosen probability function and the model is lossless. This diffusion model is analyzed in detail, and its diffusivity is quantified in the form of frequency dependent diffusion coefficients. The approach used to measuring boundary diffusion is described here in detail for the 2-D digital waveguide mesh and can readily be extended for the 3-D case
A deep learning framework for quality assessment and restoration in video endoscopy
Endoscopy is a routine imaging technique used for both diagnosis and
minimally invasive surgical treatment. Artifacts such as motion blur, bubbles,
specular reflections, floating objects and pixel saturation impede the visual
interpretation and the automated analysis of endoscopy videos. Given the
widespread use of endoscopy in different clinical applications, we contend that
the robust and reliable identification of such artifacts and the automated
restoration of corrupted video frames is a fundamental medical imaging problem.
Existing state-of-the-art methods only deal with the detection and restoration
of selected artifacts. However, typically endoscopy videos contain numerous
artifacts which motivates to establish a comprehensive solution.
We propose a fully automatic framework that can: 1) detect and classify six
different primary artifacts, 2) provide a quality score for each frame and 3)
restore mildly corrupted frames. To detect different artifacts our framework
exploits fast multi-scale, single stage convolutional neural network detector.
We introduce a quality metric to assess frame quality and predict image
restoration success. Generative adversarial networks with carefully chosen
regularization are finally used to restore corrupted frames.
Our detector yields the highest mean average precision (mAP at 5% threshold)
of 49.0 and the lowest computational time of 88 ms allowing for accurate
real-time processing. Our restoration models for blind deblurring, saturation
correction and inpainting demonstrate significant improvements over previous
methods. On a set of 10 test videos we show that our approach preserves an
average of 68.7% which is 25% more frames than that retained from the raw
videos.Comment: 14 page
- …