Power Estimation Technique for DSP Architectures.

The main goal of power estimation is to optimize the power consumption of a electronic design. Power is a strongly pattern dependent function. Input statistics greatly influence on average power. We solve the pattern dependence problem for intellectual property (IP) designs. In this paper, we present a power macro-modeling technique for digital signal processing (DSP) architectures in terms of the statistical knowledge of their primary inputs. During the power estimation procedure, the sequence of an input stream is generated by a genetic algorithm using input metrics. Then, a Monte Carlo zero delay simulation is performed and a power dissipation macro-model function is built from power dissipation results. From then on, this macro-model function can be used to estimate power dissipation of the system just by using the statistics of the macro-block’s primary in puts. In experiments with the DSP system, the average error is 26%

Multilevel Power Estimation Of VLSI Circuits Using Efficient Algorithms

New and complex systems are being implemented using highly advanced Electronic Design Automation (EDA) tools. As the complexity increases day by day, the dissipation of power has emerged as one of the very important design constraints. Now low power designs are not only used in small size applications like cell phones and handheld devices but also in high-performance computing applications. Embedded memories have been used extensively in modern SOC designs. In order to estimate the power consumption of the entire design correctly, an accurate memory power model is needed. However, the memory power model commonly used in commercial EDA tools is too simple to estimate the power consumption accurately. For complex digital circuits, building their power models is a popular approach to estimate their power consumption without detailed circuit information. In the literature, most of power models are built with lookup tables. However, building the power models with lookup tables may become infeasible for large circuits because the table size would increase exponentially to meet the accuracy requirement. This thesis involves two parts. In first part it uses the Synopsys power measurement tools together with the use of synthesis and extraction tools to determine power consumed by various macros at different levels of abstraction including the Register Transfer Level (RTL), the gate and the transistor level. In general, it can be concluded that as the level of abstraction goes down the accuracy of power measurement increases depending on the tool used. In second part a novel power modeling approach for complex circuits by using neural networks to learn the relationship between power dissipation and input/output characteristic vector during simulation has been developed. Our neural power model has very low complexity such that this power model can be used for complex circuits. Using such a simple structure, the neural power models can still have high accuracy because they can automatically consider the non-linear power distributions. Unlike the power characterization process in traditional approaches, our characterization process is very simple and straightforward. More importantly, using the neural power model for power estimation does not require any transistor-level or gate-level description of the circuits. The experimental results have shown that the estimations are accurate and efficient for different test sequences with wide range of input distributions

Data-dependent cycle-accurate power modeling of RTL-level IPs using machine learning

In a chip design project, early design planning has a strong impact on the schedule and the cost of design. Power estimation is part of early design planning, and it greatly affects design decisions. Power modeling performed at a high level of abstraction is fast but inaccurate due to lack of circuit switching activity information. By contrast, power modeling performed at a low level of abstraction is more accurate as the synthesized circuit synthesis is known, but this simulation is typically slow. This report explores a power modeling approach performed at register transfer level (RTL). It exploits machine learning models in order to have a fast yet relatively accurate cycle-by-cycle power estimation. The approach is data-dependent, where cycle-specific models are trained based on the switching activity of signals obtained from RTL simulation and cycle-by-cycle power values obtained from a reference gate-level simulation of an existing RTL design. Therefore, if any changes are applied to the RTL design, re-training of models is required. The approach aims at obtaining fast yet accurate power predictions for new invocations of a given trained model using signal activity information collected during simulation of the unmodified RTL. At a low level, the complete visibility of signals in a design unintuitively might cause overtraining the model leading to inaccurate estimation. The suggested model employs automatic feature selection in each cycle. Based on the invocations used to train the cycle-by-cycle models, only signals that may switch during a given cycle will be selected as the features for their respective cycle-specific model. The method was tested on an 8-by-8 DCT design and the power estimates were within 6.5% of those from a commercial power analysis tool. This report also simulates and compares the approach of cycle-specific models to the approach of a single global model for all cycles and show that the cycle-specific approach is twice as accurate.Electrical and Computer Engineerin

From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Transaction-level power analysis of VLSI digital systems

n/

Learning-based system-level power modeling of hardware IPs

Accurate power models for hardware components at high levels of abstraction are a critical component to enable system-level power analysis and optimization. Virtual platform prototypes are widely utilized to support early system-level design space exploration. There is, however, a lack of accurate and fast power models of hardware components at such high-levels of abstraction. In this dissertation, we present novel learning‑based approaches for extending fast functional simulation models of white-, gray-, and black-box custom hardware intellectual property components (IPs) with accurate power estimates. Depending on the observability, we extend high-level functional models with the capability to capture data-dependent resource, block, or I/O activity without a significant loss in simulation speed. We further leverage state-of-the-art machine learning techniques to synthesize abstract power models that can predict cycle-, block-, and invocation-level power from low-level hardware implementations, where we introduce novel structural decomposition techniques to reduce model complexities and increase estimation accuracy. Our white-box approach integrates with existing high-level synthesis (HLS) tools to automatically extract resource mapping information, which is used to trace data-dependent resource-level activity and drive a cycle-accurate online power-performance model during functional simulation. Our gray-box approach supports power estimation at coarser basic block granularity. It uses only limited information about block inputs and outputs to extract light-weight block-level activity from a functional simulation and drive a basic block-level power model that utilizes a control flow decomposition to improve accuracy and speed. It is faster than cycle-level models, while providing a finer granularity than invocation-level models, which allows to further navigate accuracy and speed trade-offs. We finally propose a novel approach for extending behavioral models of black-box hardware IPs with an invocation-level power estimate. Our black-box model only uses input and output history to track data-dependent pipeline behavior, where we introduce a specialized ensemble learning that is composed out of individually selected cycle-by-cycle models with reduced complexity and increased accuracy. The proposed approaches are fully automated by integrating with existing, commercial HLS tools for custom hardware synthesized by HLS. Results of applying our approaches to various industrial‑strength design examples show that our power models can predict cycle‑, basic block-, and invocation-level power consumption to within 10%, 9%, and 3% of a commercial gate-level power estimation tool, respectively, all while running at several order of magnitude faster speeds of 1-10Mcycles/sec.Electrical and Computer Engineerin

Methoden und Beschreibungssprachen zur Modellierung und Verifikation vonSchaltungen und Systemen: MBMV 2015 - Tagungsband, Chemnitz, 03. - 04. März 2015

Der Workshop Methoden und Beschreibungssprachen zur Modellierung und Verifikation von Schaltungen und Systemen (MBMV 2015) findet nun schon zum 18. mal statt. Ausrichter sind in diesem Jahr die Professur Schaltkreis- und Systementwurf der Technischen Universität Chemnitz und das Steinbeis-Forschungszentrum Systementwurf und Test. Der Workshop hat es sich zum Ziel gesetzt, neueste Trends, Ergebnisse und aktuelle Probleme auf dem Gebiet der Methoden zur Modellierung und Verifikation sowie der Beschreibungssprachen digitaler, analoger und Mixed-Signal-Schaltungen zu diskutieren. Er soll somit ein Forum zum Ideenaustausch sein. Weiterhin bietet der Workshop eine Plattform für den Austausch zwischen Forschung und Industrie sowie zur Pflege bestehender und zur Knüpfung neuer Kontakte. Jungen Wissenschaftlern erlaubt er, ihre Ideen und Ansätze einem breiten Publikum aus Wissenschaft und Wirtschaft zu präsentieren und im Rahmen der Veranstaltung auch fundiert zu diskutieren. Sein langjähriges Bestehen hat ihn zu einer festen Größe in vielen Veranstaltungskalendern gemacht. Traditionell sind auch die Treffen der ITGFachgruppen an den Workshop angegliedert. In diesem Jahr nutzen zwei im Rahmen der InnoProfile-Transfer-Initiative durch das Bundesministerium für Bildung und Forschung geförderte Projekte den Workshop, um in zwei eigenen Tracks ihre Forschungsergebnisse einem breiten Publikum zu präsentieren. Vertreter der Projekte Generische Plattform für Systemzuverlässigkeit und Verifikation (GPZV) und GINKO - Generische Infrastruktur zur nahtlosen energetischen Kopplung von Elektrofahrzeugen stellen Teile ihrer gegenwärtigen Arbeiten vor. Dies bereichert denWorkshop durch zusätzliche Themenschwerpunkte und bietet eine wertvolle Ergänzung zu den Beiträgen der Autoren. [... aus dem Vorwort