Optimization of 5-Axis milling processes based on the process models with application to airfoil machining

5-axis milling is widely used in machining of complex surfaces such as airfoils. Improper selection of machining parameters may cause low productivity and undesired results during machining. There are several constraints such as available power and torque, chatter stability, tool breakage etc. In order to respect such constraints proper machining parameters should be determined. In this paper, methodologies for improving 5-axis milling processes are presented. Selection of machining parameters is performed using process simulations. The developed methodologies are presented on an example airfoil

Computational Geometry for Optimal Workpiece Orientation

Workpiece orientation is formulated as an optimal design problem based on a discrete approximation of design surface geometry, the kinematic capabilities of the process machine tool, and processing cost. The primary process application addressed is three-and four-axis numerically controlled (NC) milling, although the techniques presented may be applied to machines with more general articulation. Recent developments in applied spherical geometry are employed to formulate a constrained problem, and furthermore, a nonlinear optimization problem. For three-axis milling applications, a weight is assigned to each surface normal of the discrete model corresponding to the actual area it represents. Workpiece/machine orientation is optimized such that the angle between the weighted normals and the milling tool axis is minimized. This formulation is augmented, for four-axis milling, to incorporate limitations of the rotational degree of freedom, into the optimization formulation. The influence of tool geometry is also discussed and incorporated within constrained orientation algorithm

Computer aided process planning for rapid prototyping using a genetic algorithm

This thesis presents a new method for Computer Aided Process Planning (CAPP) for a subtractive Rapid Prototyping (RP) process. The CNC-RP process uses a 4-axis CNC machining center to create parts with flat end-mills. The objective is to determine the optimal system parameters for the RP process - those that enable parts to be created in a shorter amount of time. Two main contributions make this possible. First, a method of generating different machining orientation sets enables the part to be created with the same level of safety and quality available with the current system. Second, machining time is related to tool selection. These two contributions are combined into a single objective function. A Genetic Algorithm technique is implemented to determine the best machining tool sizes and machining orientations. The results show that a Genetic Algorithm can be applied to a RP process plan to reduce the total processing time

Manufacturability analysis for non-feature-based objects

This dissertation presents a general methodology for evaluating key manufacturability indicators using an approach that does not require feature recognition, or feature-based design input. The contributions involve methods for computing three manufacturability indicators that can be applied in a hierarchical manner. The analysis begins with the computation of visibility, which determines the potential manufacturability of a part using material removal processes such as CNC machining. This manufacturability indicator is purely based on accessibility, without considering the actual machine setup and tooling. Then, the analysis becomes more specific by analyzing the complexity in setup planning for the part; i.e. how the part geometry can be oriented to a cutting tool in an accessible manner. This indicator establishes if the part geometry is accessible about an axis of rotation, namely, whether it can be manufactured on a 4th-axis indexed machining system. The third indicator is geometric machinability, which is computed for each machining operation to indicate the actual manufacturability when employing a cutting tool with specific shape and size. The three manufacturability indicators presented in this dissertation are usable as steps in a process; however they can be executed alone or hierarchically in order to render manufacturability information. At the end of this dissertation, a Multi-Layered Visibility Map is proposed, which would serve as a re-design mechanism that can guide a part design toward increased manufacturability

Topological model for machining of parts with complex shapes

Complex shapes are widely used to design products in several industries such as aeronautics, automotive and domestic appliances. Several variations of their curvatures and orientations generate difficulties during their manufacturing or the machining of dies used in moulding, injection and forging. Analysis of several parts highlights two levels of difficulties between three types of shapes: prismatic parts with simple geometrical shapes, aeronautic structure parts composed of several shallow pockets and forging dies composed of several deep cavities which often contain protrusions. This paper mainly concerns High Speed Machining (HSM) of these dies which represent the highest complexity level because of the shapes' geometry and their topology. Five axes HSM is generally required for such complex shaped parts but 3 axes machining can be sufficient for dies. Evolutions in HSM CAM software and machine tools lead to an important increase in time for machining preparation. Analysis stages of the CAD model particularly induce this time increase which is required for a wise choice of cutting tools and machining strategies. Assistance modules for prismatic parts machining features identification in CAD models are widely implemented in CAM software. In spite of the last CAM evolutions, these kinds of CAM modules are undeveloped for aeronautical structure parts and forging dies. Development of new CAM modules for the extraction of relevant machining areas as well as the definition of the topological relations between these areas must make it possible for the machining assistant to reduce the machining preparation time. In this paper, a model developed for the description of complex shape parts topology is presented. It is based on machining areas extracted for the construction of geometrical features starting from CAD models of the parts. As topology is described in order to assist machining assistant during machining process generation, the difficulties associated with tasks he carried out are analyzed at first. The topological model presented after is based on the basic geometrical features extracted. Topological relations which represent the framework of the model are defined between the basic geometrical features which are gathered afterwards in macro-features. Approach used for the identification of these macro-features is also presented in this paper. Detailed application on the construction of the topological model of forging dies is presented in the last part of the paper

Manufacturing Processes of Integral Blade Rotors for Turbomachinery, Processes and New Approaches

Manufacturing techniques applied to turbomachinery components represent a challenge in the aeronautical sector. These components are commonly composed of high resistant super-alloys; in order to satisfy the extreme working conditions, they have to support during their useful life. Besides, in the particular case of Integrally Bladed Rotors (IBR), they usually present complex geometries that need to be roughed and finished by milling and grinding processes, respectively. Thermoresistant superalloys present many challenges in terms of machinability what leads to find new alternatives to conventional manufacturing processes. In order to face this issue, this work presents a review of the last advances for IBR manufacturing and repairing processes.We are grateful to Basque Excellence university Groups IT IT1337-19, and Ministry of economy project IBRELIABLE (DPI2016-74845-R), and Elkartek PROCODA KK 2019-004

End mill tools integration in CNC machining for rapid manufacturing processes: simulation studies

Computer Numerical Controlled (CNC) machining has been recognized as a manufacturing process that is capable of producing metal parts with high precision and reliable quality, whereas many additive manufacturing methods are less capable in these respects. The introduction of a new layer removal methodology that utilizes an indexing device to clamp the workpiece can be used to extend CNC applications into the realm of rapid manufacturing (CNC-RM) processes. This study aims to improve the implementation of CNC machining for RM by formulating a distinct approach to integrate end mill tools during finishing processes. A main objective is to enhance process efficiency by minimizing the stair-casing effect of layer removal so as to improve the quality of machined parts. In order to achieve this, different types of end mill tools are introduced to cater for specific part surfaces during finishing operations. Virtual machining simulations are executed to verify the method and the implications. The findings indicate the advantages of the approach in terms of cutting time and excess volume left on the parts. It is shown that using different tools for finishing operations will improve the capabilities of CNC machining for rapid manufacturing applications