525 research outputs found
Whole-Body MPC for a Dynamically Stable Mobile Manipulator
Autonomous mobile manipulation offers a dual advantage of mobility provided
by a mobile platform and dexterity afforded by the manipulator. In this paper,
we present a whole-body optimal control framework to jointly solve the problems
of manipulation, balancing and interaction as one optimization problem for an
inherently unstable robot. The optimization is performed using a Model
Predictive Control (MPC) approach; the optimal control problem is transcribed
at the end-effector space, treating the position and orientation tasks in the
MPC planner, and skillfully planning for end-effector contact forces. The
proposed formulation evaluates how the control decisions aimed at end-effector
tracking and environment interaction will affect the balance of the system in
the future. We showcase the advantages of the proposed MPC approach on the
example of a ball-balancing robot with a robotic manipulator and validate our
controller in hardware experiments for tasks such as end-effector pose tracking
and door opening
Disturbance Observer-based Robust Control and Its Applications: 35th Anniversary Overview
Disturbance Observer has been one of the most widely used robust control
tools since it was proposed in 1983. This paper introduces the origins of
Disturbance Observer and presents a survey of the major results on Disturbance
Observer-based robust control in the last thirty-five years. Furthermore, it
explains the analysis and synthesis techniques of Disturbance Observer-based
robust control for linear and nonlinear systems by using a unified framework.
In the last section, this paper presents concluding remarks on Disturbance
Observer-based robust control and its engineering applications.Comment: 12 pages, 4 figure
Asymmetric Dual-Arm Task Execution using an Extended Relative Jacobian
Coordinated dual-arm manipulation tasks can be broadly characterized as
possessing absolute and relative motion components. Relative motion tasks, in
particular, are inherently redundant in the way they can be distributed between
end-effectors. In this work, we analyse cooperative manipulation in terms of
the asymmetric resolution of relative motion tasks. We discuss how existing
approaches enable the asymmetric execution of a relative motion task, and show
how an asymmetric relative motion space can be defined. We leverage this result
to propose an extended relative Jacobian to model the cooperative system, which
allows a user to set a concrete degree of asymmetry in the task execution. This
is achieved without the need for prescribing an absolute motion target.
Instead, the absolute motion remains available as a functional redundancy to
the system. We illustrate the properties of our proposed Jacobian through
numerical simulations of a novel differential Inverse Kinematics algorithm.Comment: Accepted for presentation at ISRR19. 16 Page
Control strategies for robotic manipulators
This survey is aimed at presenting the major robust control strategies for rigid robot manipulators. The techniques discussed are feedback linearization/Computed torque control, Variable structure compensator, Passivity based approach and Disturbance observer based control. The first one is based on complete dynamic model of a robot. It results in simple linear control which offers guaranteed stability. Variable structure compensator uses a switching/relay action to overcome dynamic uncertainties and disturbances. Passivity based controller make use of passive structure of a robot. If passivity of a feedback system is proved, nonlinearities and uncertainties will not affect the stability. Disturbance observer based controllers estimate disturbances, which can be cancelled out to achieve a nominal model, for which a simple controller can then be designed. This paper, after explaining each control strategy in detail, finally compares these strategies for their pros and cons. Possible solutions to cope with the drawbacks have also been presented in tabular form. © 2012 IEEE
An approach to CMG steering using feedback linearization
This paper presents an approach for controlling spacecraft equipped with control moment gyroscopes. A technique from feedback linearization theory is used to transform the original nonlinear problem to an equivalent linear form without approximating assumptions. In this form, the spacecraft dynamics appear linearly, and are decoupled from redundancy in the system of gyroscopes. A general approach to distributing control effort among the available actuators is described which includes provisions for redistribution of rotors, explicit bounds in gimbal rates, and guaranteed operation at or near singular configurations. A particular algorithm is developed for systems of double-gimbal devices, and demonstrated in two examples for which existing approaches fail to give adequate performance
Dynamics and Control of Whole Arm Grasps
In this paper we consider the dynamics and control of whole arm grasping systems. We develop a control scheme that employs a minimal set of inputs to control the trajectory of the system while using the surplus inputs to control the interaction forces in order to maintain the unilateral constraints at both rolling and sliding contacts. Since the number of surplus inputs is less than the number of output force variables, we propose a controller that controls the critical contact force components. We emphasize the dynamic models and algorithms for computing contact forces, which are crucial to the development of the control algorithms. Finally, we show how compliant contact models and a previously developed integrated simulation approach [14] are used to overcome the difficulties with uniqueness and existence of solutions. A planar whole arm manipulation system is used as an example to illustrate the basic ideas
Dynamic Neural Networks for Motion-Force Control of Redundant Manipulators: An Optimization Perspective
Accurate position-force control is a core and challenging problem in robotics, especially for manipulators with redundant DOFs. For example, trajectory tracking based control usually fails for grinding robots due to intolerable impact forces imposed onto the end-effectors. The main difficulties lie in the coupling of motion and contact force, redundancy resolution and physical constraints, etc. In this paper, we propose a novel motionforce control strategy in the framework of projection recurrent neural networks. Tracking error and contact force are described in orthogonal spaces respectively, and by selecting minimizing joint torque as secondary task, the control problem is formulated as a quadratic-programming (QP) problem under multiple constraints. In order to obtain real-time optimization of joint toque which is non-convex relative to joint angles, the original QP is reconstructed in velocity level, where the original objective function is replaced by its time derivative. Then a dynamic neural network which is convergence provable is established to solve the modified QP problem online. This work generalizes projection recurrent neural network based position control of manipulators to that of position-force control, which opens a new avenue to shift position-force control of manipulators from pure control perspective to cross design with both convergence and optimality consideration. Numerical and experimental results show that the proposed scheme achieves accurate position-force control, and is capable of handling inequality constraints such as joint angular, velocity and torque limitations, simultaneously, consumption of joint torque can be decreased effectively
Kinematics and Robot Design I, KaRD2018
This volume collects the papers published on the Special Issue “Kinematics and Robot Design I, KaRD2018” (https://www.mdpi.com/journal/robotics/special_issues/KARD), which is the first issue of the KaRD Special Issue series, hosted by the open access journal “MDPI Robotics”. The KaRD series aims at creating an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2018 received 22 papers and, after the peer-review process, accepted only 14 papers. The accepted papers cover some theoretical and many design/applicative aspects
- …