OmpSs@cloudFPGA: An FPGA task-based programming model with message passing

Nowadays, a new parallel paradigm for energy-efficient heterogeneous hardware infrastructures is required to achieve better performance at a reasonable cost on high-performance computing applications. Under this new paradigm, some application parts are offloaded to specialized accelerators that run faster or are more energy-efficient than CPUs. Field-Programmable Gate Arrays (FPGA) are one of those types of accelerators that are becoming widely available in data centers. This paper proposes OmpSs@cloudFPGA, which includes novel extensions to parallel task-based programming models that enable easy and efficient programming of heterogeneous clusters with FPGAs. The programmer only needs to annotate, with OpenMP-like pragmas, the tasks of the application that should be accelerated in the cluster of FPGAs. Next, the proposed programming model framework automatically extracts parts annotated with High-Level Synthesis (HLS) pragmas and synthesizes them into hardware accelerator cores for FPGAs. Additionally, our extensions include and support two novel features: 1) FPGA-to-FPGA direct communication using a Message Passing Interface (MPI) similar Application Programming Interface (API) with one-to-one and collective communications to alleviate host communication channel bottleneck, and 2) creating and spawning work from inside the FPGAs to their own accelerator cores based on an MPI rank-like identification. These features break the classical host-accelerator model, where the host (typically the CPU) generates all the work and distributes it to each accelerator. We also present an evaluation of OmpSs@cloudFPGA for different parallel strategies of the N-Body application on the IBM cloudFPGA research platform. Results show that for cluster sizes up to 56 FPGAs, the performance scales linearly. To the best of our knowledge, this is the best performance obtained for N-body over FPGA platforms, reaching 344 Gpairs/s with 56 FPGAs. Finally, we compare the performance and power consumption of the proposed approach with the ones obtained by a classical execution on the MareNostrum 4 supercomputer, demonstrating that our FPGA approach reduces power consumption by an order of magnitude.This work has been done in the context of the IBM/BSC Deep Learning Center initiative. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 754337 (EuroEXA), from Spanish Government (PID2019-107255GBC21/AEI/10.13039/501100011033), and from Generalitat de Catalunya (2017-SGR-1414 and 2017-SGR-1328).Peer ReviewedPostprint (author's final draft

ACiS: smart switches with application-level acceleration

Network performance has contributed fundamentally to the growth of supercomputing over the past decades. In parallel, High Performance Computing (HPC) peak performance has depended, first, on ever faster/denser CPUs, and then, just on increasing density alone. As operating frequency, and now feature size, have levelled off, two new approaches are becoming central to achieving higher net performance: configurability and integration. Configurability enables hardware to map to the application, as well as vice versa. Integration enables system components that have generally been single function-e.g., a network to transport data—to have additional functionality, e.g., also to operate on that data. More generally, integration enables compute-everywhere: not just in CPU and accelerator, but also in network and, more specifically, the communication switches. In this thesis, we propose four novel methods of enhancing HPC performance through Advanced Computing in the Switch (ACiS). More specifically, we propose various flexible and application-aware accelerators that can be embedded into or attached to existing communication switches to improve the performance and scalability of HPC and Machine Learning (ML) applications. We follow a modular design discipline through introducing composable plugins to successively add ACiS capabilities. In the first work, we propose an inline accelerator to communication switches for user-definable collective operations. MPI collective operations can often be performance killers in HPC applications; we seek to solve this bottleneck by offloading them to reconfigurable hardware within the switch itself. We also introduce a novel mechanism that enables the hardware to support MPI communicators of arbitrary shape and that is scalable to very large systems. In the second work, we propose a look-aside accelerator for communication switches that is capable of processing packets at line-rate. Functions requiring loops and states are addressed in this method. The proposed in-switch accelerator is based on a RISC-V compatible Coarse Grained Reconfigurable Arrays (CGRAs). To facilitate usability, we have developed a framework to compile user-provided C/C++ codes to appropriate back-end instructions for configuring the accelerator. In the third work, we extend ACiS to support fused collectives and the combining of collectives with map operations. We observe that there is an opportunity of fusing communication (collectives) with computation. Since the computation can vary for different applications, ACiS support should be programmable in this method. In the fourth work, we propose that switches with ACiS support can control and manage the execution of applications, i.e., that the switch be an active device with decision-making capabilities. Switches have a central view of the network; they can collect telemetry information and monitor application behavior and then use this information for control, decision-making, and coordination of nodes. We evaluate the feasibility of ACiS through extensive RTL-based simulation as well as deployment in an open-access cloud infrastructure. Using this simulation framework, when considering a Graph Convolutional Network (GCN) application as a case study, a speedup of on average 3.4x across five real-world datasets is achieved on 24 nodes compared to a CPU cluster without ACiS capabilities

Computing Platforms for Big Biological Data Analytics: Perspectives and Challenges.

The last decade has witnessed an explosion in the amount of available biological sequence data, due to the rapid progress of high-throughput sequencing projects. However, the biological data amount is becoming so great that traditional data analysis platforms and methods can no longer meet the need to rapidly perform data analysis tasks in life sciences. As a result, both biologists and computer scientists are facing the challenge of gaining a profound insight into the deepest biological functions from big biological data. This in turn requires massive computational resources. Therefore, high performance computing (HPC) platforms are highly needed as well as efficient and scalable algorithms that can take advantage of these platforms. In this paper, we survey the state-of-the-art HPC platforms for big biological data analytics. We first list the characteristics of big biological data and popular computing platforms. Then we provide a taxonomy of different biological data analysis applications and a survey of the way they have been mapped onto various computing platforms. After that, we present a case study to compare the efficiency of different computing platforms for handling the classical biological sequence alignment problem. At last we discuss the open issues in big biological data analytics

BlueDBM: An Appliance for Big Data Analytics

Complex data queries, because of their need for random accesses, have proven to be slow unless all the data can be accommodated in DRAM. There are many domains, such as genomics, geological data and daily twitter feeds where the datasets of interest are 5TB to 20 TB. For such a dataset, one would need a cluster with 100 servers, each with 128GB to 256GBs of DRAM, to accommodate all the data in DRAM. On the other hand, such datasets could be stored easily in the flash memory of a rack-sized cluster. Flash storage has much better random access performance than hard disks, which makes it desirable for analytics workloads. In this paper we present BlueDBM, a new system architecture which has flash-based storage with in-store processing capability and a low-latency high-throughput inter-controller network. We show that BlueDBM outperforms a flash-based system without these features by a factor of 10 for some important applications. While the performance of a ram-cloud system falls sharply even if only 5%~10% of the references are to the secondary storage, this sharp performance degradation is not an issue in BlueDBM. BlueDBM presents an attractive point in the cost-performance trade-off for Big Data analytics.Quanta Computer (Firm)Samsung (Firm)Lincoln Laboratory (PO7000261350)Intel Corporatio

Mapping applications onto FPGA-centric clusters

High Performance Computing (HPC) is becoming increasingly important throughout science and engineering as ever more complex problems must be solved through computational simulations. In these large computational applications, the latency of communication between processing nodes is often the key factor that limits performance. An emerging alternative computer architecture that addresses the latency problem is the FPGA-centric cluster (FCC); in these systems, the devices (FPGAs) are directly interconnected and thus many layers of hardware and software are avoided. The result can be scalability not currently achievable with other technologies. In FCCs, FPGAs serve multiple functions: accelerator, network interface card (NIC), and router. Moreover, because FPGAs are configurable, there is substantial opportunity to tailor the router hardware to the application; previous work has demonstrated that such application-aware configuration can effect a substantial improvement in hardware efficiency. One constraint of FCCs is that it is convenient for their interconnect to be static, direct, and have a two or three dimensional mesh topology. Thus, applications that are naturally of a different dimensionality (have a different logical topology) from that of the FCC must be remapped to obtain optimal performance. In this thesis we study various aspects of the mapping problem for FCCs. There are two major research thrusts. The first is finding the optimal mapping of logical to physical topology. This problem has received substantial attention by both the theory community, where topology mapping is referred to as graph embedding, and by the High Performance Computing (HPC) community, where it is a question of process placement. We explore the implications of the different mapping strategies on communication behavior in FCCs, especially on resulting load imbalance. The second major research thrust is built around the hypothesis that applications that need to be remapped (due to differing logical and physical topologies) will have different optimal router configurations from those applications that do not. For example, due to remapping, some virtual or physical communication links may have little occupancy; therefore fewer resources should be allocated to them. Critical here is the creation of a new set of parameterized hardware features that can be configured to best handle load imbalances caused by remapping. These two thrusts form a codesign loop: certain mapping algorithms may be differentially optimal due to application-aware router reconfiguration that accounts for this mapping. This thesis has four parts. The first part introduces the background and previous work related to communication in general and, in particular, how it is implemented in FCCs. We build on previous work on application-aware router configuration. The second part introduces topology mapping mechanisms including those derived from graph embeddings and a greedy algorithm commonly used in HPC. In the third part, topology mappings are evaluated for performance and imbalance; we note that different mapping strategies lead to different imbalances both in the overall network and in each node. The final part introduces reconfigure router design that allocates resources based on different imbalance situations caused by different mapping behaviors

Accelerating Pattern Matching in Neuromorphic Text Recognition System Using Intel Xeon Phi Coprocessor

Neuromorphic computing systems refer to the computing architecture inspired by the working mechanism of human brains. The rapidly reducing cost and increasing performance of state-of-the-art computing hardware allows large-scale implementation of machine intelligence models with neuromorphic architectures and opens the opportunity for new applications. One such computing hardware is Intel Xeon Phi coprocessor, which delivers over a TeraFLOP of computing power with 61 integrated processing cores. How to efficiently harness such computing power to achieve real time decision and cognition is one of the key design considerations. This work presents an optimized implementation of Brain-State-in-a-Box (BSB) neural network model on the Xeon Phi coprocessor for pattern matching in the context of intelligent text recognition of noisy document images. From a scalability standpoint on a High Performance Computing (HPC) platform we show that efficient workload partitioning and resource management can double the performance of this many-core architecture for neuromorphic applications

A cross-stack, network-centric architectural design for next-generation datacenters

This thesis proposes a full-stack, cross-layer datacenter architecture based on in-network computing and near-memory processing paradigms. The proposed datacenter architecture is built atop two principles: (1) utilizing commodity, off-the-shelf hardware (i.e., processor, DRAM, and network devices) with minimal changes to their architecture, and (2) providing a standard interface to the programmers for using the novel hardware. More specifically, the proposed datacenter architecture enables a smart network adapter to collectively compress/decompress data exchange between distributed DNN training nodes and assist the operating system in performing aggressive processor power management. It also deploys specialized memory modules in the servers, capable of performing general-purpose computation and network connectivity. This thesis unlocks the potentials of hardware and operating system co-design in architecting application-transparent, near-data processing hardware for improving datacenter's performance, energy efficiency, and scalability. We evaluate the proposed datacenter architecture using a combination of full-system simulation, FPGA prototyping, and real-system experiments

Cooperative high-performance computing with FPGAs - matrix multiply case-study

In high-performance computing, there is great opportunity for systems that use FPGAs to handle communication while also performing computation on data in transit in an ``altruistic'' manner--that is, using resources for computation that might otherwise be used for communication, and in a way that improves overall system performance and efficiency. We provide a specific definition of \textbf{Computing in the Network} that captures this opportunity. We then outline some overall requirements and guidelines for cooperative computing that include this ability, and make suggestions for specific computing capabilities to be added to the networking hardware in a system. We then explore some algorithms running on a network so equipped for a few specific computing tasks: dense matrix multiplication, sparse matrix transposition and sparse matrix multiplication. In the first instance we give limits of problem size and estimates of performance that should be attainable with present-day FPGA hardware