NASA SBIR abstracts of 1991 phase 1 projects

The objectives of 301 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1991 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 301, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1991 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included

Research and Education in Computational Science and Engineering

Over the past two decades the field of computational science and engineering (CSE) has penetrated both basic and applied research in academia, industry, and laboratories to advance discovery, optimize systems, support decision-makers, and educate the scientific and engineering workforce. Informed by centuries of theory and experiment, CSE performs computational experiments to answer questions that neither theory nor experiment alone is equipped to answer. CSE provides scientists and engineers of all persuasions with algorithmic inventions and software systems that transcend disciplines and scales. Carried on a wave of digital technology, CSE brings the power of parallelism to bear on troves of data. Mathematics-based advanced computing has become a prevalent means of discovery and innovation in essentially all areas of science, engineering, technology, and society; and the CSE community is at the core of this transformation. However, a combination of disruptive developments---including the architectural complexity of extreme-scale computing, the data revolution that engulfs the planet, and the specialization required to follow the applications to new frontiers---is redefining the scope and reach of the CSE endeavor. This report describes the rapid expansion of CSE and the challenges to sustaining its bold advances. The report also presents strategies and directions for CSE research and education for the next decade.Comment: Major revision, to appear in SIAM Revie

[Activity of Institute for Computer Applications in Science and Engineering]

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science

NASA high performance computing and communications program

The National Aeronautics and Space Administration's HPCC program is part of a new Presidential initiative aimed at producing a 1000-fold increase in supercomputing speed and a 100-fold improvement in available communications capability by 1997. As more advanced technologies are developed under the HPCC program, they will be used to solve NASA's 'Grand Challenge' problems, which include improving the design and simulation of advanced aerospace vehicles, allowing people at remote locations to communicate more effectively and share information, increasing scientist's abilities to model the Earth's climate and forecast global environmental trends, and improving the development of advanced spacecraft. NASA's HPCC program is organized into three projects which are unique to the agency's mission: the Computational Aerosciences (CAS) project, the Earth and Space Sciences (ESS) project, and the Remote Exploration and Experimentation (REE) project. An additional project, the Basic Research and Human Resources (BRHR) project exists to promote long term research in computer science and engineering and to increase the pool of trained personnel in a variety of scientific disciplines. This document presents an overview of the objectives and organization of these projects as well as summaries of individual research and development programs within each project

PC-grade parallel processing and hardware acceleration for large-scale data analysis

Arguably, modern graphics processing units (GPU) are the first commodity, and desktop parallel processor. Although GPU programming was originated from the interactive rendering in graphical applications such as computer games, researchers in the field of general purpose computation on GPU (GPGPU) are showing that the power, ubiquity and low cost of GPUs makes them an ideal alternative platform for high-performance computing. This has resulted in the extensive exploration in using the GPU to accelerate general-purpose computations in many engineering and mathematical domains outside of graphics. However, limited to the development complexity caused by the graphics-oriented concepts and development tools for GPU-programming, GPGPU has mainly been discussed in the academic domain so far and has not yet fully fulfilled its promises in the real world. This thesis aims at exploiting GPGPU in the practical engineering domain and presented a novel contribution to GPGPU-driven linear time invariant (LTI) systems that are employed by the signal processing techniques in stylus-based or optical-based surface metrology and data processing. The core contributions that have been achieved in this project can be summarized as follow. Firstly, a thorough survey of the state-of-the-art of GPGPU applications and their development approaches has been carried out in this thesis. In addition, the category of parallel architecture pattern that the GPGPU belongs to has been specified, which formed the foundation of the GPGPU programming framework design in the thesis. Following this specification, a GPGPU programming framework is deduced as a general guideline to the various GPGPU programming models that are applied to a large diversity of algorithms in scientific computing and engineering applications. Considering the evolution of GPU’s hardware architecture, the proposed frameworks cover through the transition of graphics-originated concepts for GPGPU programming based on legacy GPUs and the abstraction of stream processing pattern represented by the compute unified device architecture (CUDA) in which GPU is considered as not only a graphics device but a streaming coprocessor of CPU. Secondly, the proposed GPGPU programming framework are applied to the practical engineering applications, namely, the surface metrological data processing and image processing, to generate the programming models that aim to carry out parallel computing for the corresponding algorithms. The acceleration performance of these models are evaluated in terms of the speed-up factor and the data accuracy, which enabled the generation of quantifiable benchmarks for evaluating consumer-grade parallel processors. It shows that the GPGPU applications outperform the CPU solutions by up to 20 times without significant loss of data accuracy and any noticeable increase in source code complexity, which further validates the effectiveness of the proposed GPGPU general programming framework. Thirdly, this thesis devised methods for carrying out result visualization directly on GPU by storing processed data in local GPU memory through making use of GPU’s rendering device features to achieve realtime interactions. The algorithms employed in this thesis included various filtering techniques, discrete wavelet transform, and the fast Fourier Transform which cover the common operations implemented in most LTI systems in spatial and frequency domains. Considering the employed GPUs’ hardware designs, especially the structure of the rendering pipelines, and the characteristics of the algorithms, the series of proposed GPGPU programming models have proven its feasibility, practicality, and robustness in real engineering applications. The developed GPGPU programming framework as well as the programming models are anticipated to be adaptable for future consumer-level computing devices and other computational demanding applications. In addition, it is envisaged that the devised principles and methods in the framework design are likely to have significant benefits outside the sphere of surface metrology.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Hybrid Analog-Digital Co-Processing for Scientific Computation

In the past 10 years computer architecture research has moved to more heterogeneity and less adherence to conventional abstractions. Scientists and engineers hold an unshakable belief that computing holds keys to unlocking humanity's Grand Challenges. Acting on that belief they have looked deeper into computer architecture to find specialized support for their applications. Likewise, computer architects have looked deeper into circuits and devices in search of untapped performance and efficiency. The lines between computer architecture layers---applications, algorithms, architectures, microarchitectures, circuits and devices---have blurred. Against this backdrop, a menagerie of computer architectures are on the horizon, ones that forgo basic assumptions about computer hardware, and require new thinking of how such hardware supports problems and algorithms. This thesis is about revisiting hybrid analog-digital computing in support of diverse modern workloads. Hybrid computing had extensive applications in early computing history, and has been revisited for small-scale applications in embedded systems. But architectural support for using hybrid computing in modern workloads, at scale and with high accuracy solutions, has been lacking. I demonstrate solving a variety of scientific computing problems, including stochastic ODEs, partial differential equations, linear algebra, and nonlinear systems of equations, as case studies in hybrid computing. I solve these problems on a system of multiple prototype analog accelerator chips built by a team at Columbia University. On that team I made contributions toward programming the chips, building the digital interface, and validating the chips' functionality. The analog accelerator chip is intended for use in conjunction with a conventional digital host computer. The appeal and motivation for using an analog accelerator is efficiency and performance, but it comes with limitations in accuracy and problem sizes that we have to work around. The first problem is how to do problems in this unconventional computation model. Scientific computing phrases problems as differential equations and algebraic equations. Differential equations are a continuous view of the world, while algebraic equations are a discrete one. Prior work in analog computing mostly focused on differential equations; algebraic equations played a minor role in prior work in analog computing. The secret to using the analog accelerator to support modern workloads on conventional computers is that these two viewpoints are interchangeable. The algebraic equations that underlie most workloads can be solved as differential equations, and differential equations are naturally solvable in the analog accelerator chip. A hybrid analog-digital computer architecture can focus on solving linear and nonlinear algebra problems to support many workloads. The second problem is how to get accurate solutions using hybrid analog-digital computing. The reason that the analog computation model gives less accurate solutions is it gives up representing numbers as digital binary numbers, and instead uses the full range of analog voltage and current to represent real numbers. Prior work has established that encoding data in analog signals gives an energy efficiency advantage as long as the analog data precision is limited. While the analog accelerator alone may be useful for energy-constrained applications where inputs and outputs are imprecise, we are more interested in using analog in conjunction with digital for precise solutions. This thesis gives novel insight that the trick to do so is to solve nonlinear problems where low-precision guesses are useful for conventional digital algorithms. The third problem is how to solve large problems using hybrid analog-digital computing. The reason the analog computation model can't handle large problems is it gives up step-by-step discrete-time operation, instead allowing variables to evolve smoothly in continuous time. To make that happen the analog accelerator works by chaining hardware for mathematical operations end-to-end. During computation analog data flows through the hardware with no overheads in control logic and memory accesses. The downside is then the needed hardware size grows alongside problem sizes. While scientific computing researchers have for a long time split large problems into smaller subproblems to fit in digital computer constraints, this thesis is a first attempt to consider these divide-and-conquer algorithms as an essential tool in using the analog model of computation. As we enter the post-Moore’s law era of computing, unconventional architectures will offer specialized models of computation that uniquely support specific problem types. Two prominent examples are deep neural networks and quantum computers. Recent trends in computer science research show these unconventional architectures will soon have broad adoption. In this thesis I show another specialized, unconventional architecture is to use analog accelerators to solve problems in scientific computing. Computer architecture researchers will discover other important models of computation in the future. This thesis is an example of the discovery process, implementation, and evaluation of how an unconventional architecture supports specialized workloads

Development and application of real-time and interactive software for complex system

Soft materials have attracted considerable interest in recent years for predicting the characteristics of phase separation and self-assembly in nanoscale structures. A popular method for demonstrating and simulating the dynamic behaviour of particles (e.g. particle tracking) and to consider effects of simulation parameters is cell dynamic simulation (CDS). This is a cellular computerisation technique that can be used to investigate different aspects of morphological topographies of soft material systems. The acquisition of quantitative data from particles is a critical requirement in order to obtain a better understanding and of characterising their dynamic behaviour. To achieve this objective particle tracking methods considering quantitative data and focusing on different properties and components of particles is essential. Despite the availability of various types of particle tracking used in experimental work, there is no method available to consider uniform computational data. In order to achieve accurate and efficient computational results for cell dynamic simulation method and particle tracking, two factors are essential: computing/calculating time-scale and simulation system size. Consequently, finding available computing algorithms and resources such as sequential algorithm for implementing a complex technique and achieving precise results is critical and rather expensive. Therefore, it is highly desirable to consider a parallel algorithm and programming model to solve time-consuming and massive computational processing issues. Hence, the gaps between the experimental and computational works and solving time consuming for expensive computational calculations need to be filled in order to investigate a uniform computational technique for particle tracking and significant enhancements in speed and execution times. The work presented in this thesis details a new particle tracking method for integrating diblock copolymers in the form of spheres with a shear flow and a novel designed GPU-based parallel acceleration approach to cell dynamic simulation (CDS). In addition, the evaluation of parallel models and architectures (CPUs and GPUs) utilising the mixtures of application program interface, OpenMP and programming model, CUDA were developed. Finally, this study presents the performance enhancements achieved with GPU-CUDA of approximately ~2 times faster than multi-threading implementation and 13~14 times quicker than optimised sequential processing for the CDS computations/workloads respectively

RIACS

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities that serves as a bridge between NASA and the academic community. Under a five-year co-operative agreement with NASA, research at RIACS is focused on areas that are strategically enabling to the Ames Research Center's role as NASA's Center of Excellence for Information Technology. The primary mission of RIACS is charted to carry out research and development in computer science. This work is devoted in the main to tasks that are strategically enabling with respect to NASA's bold mission in space exploration and aeronautics. There are three foci for this work: (1) Automated Reasoning. (2) Human-Centered Computing. and (3) High Performance Computing and Networking. RIACS has the additional goal of broadening the base of researcher in these areas of importance to the nation's space and aeronautics enterprises. Through its visiting scientist program, RIACS facilitates the participation of university-based researchers, including both faculty and students, in the research activities of NASA and RIACS. RIACS researchers work in close collaboration with NASA computer scientists on projects such as the Remote Agent Experiment on Deep Space One mission, and Super-Resolution Surface Modeling