Fast jitter tolerance testing for high-speed serial links in post-silicon validation

Post-silicon electrical validation of high-speed input/output (HSIO) links is a critical process for product qualification schedules of high-performance computer platforms under current aggressive time-to-market (TTM) commitments. Improvements in signaling methods, circuits, and process technologies have allowed HSIO data rates to scale well beyond 10 Gb/s. Noise and EM effects can create multiple signal integrity problems, which are aggravated by continuously faster bus technologies. The goal of post-silicon validation for HSIO links is to ensure design robustness of both receiver (Rx) and transmitter (Tx) circuitry in real system environments. One of the most common ways to evaluate the performance of a HSIO link is to characterize the Rx jitter tolerance (JTOL) performance by measuring the bit error rate (BER) of the link under worst stressing conditions. However, JTOL testing is extremely time-consuming when executed at specification BER considering manufacturing process, voltage, and temperature (PVT) test coverage. In order to significantly accelerate this process, we propose a novel approach for JTOL testing based on an efficient direct search optimization methodology. Our approach exploits the fast execution of a modified golden section search with a high BER, while overcoming the lack of correlation between different BERs by performing a downward linear search at the actual target BER until no errors are found. Our proposed methodology is validated in a realistic industrial server post-silicon validation platform for three different computer HSIO links: SATA, USB3, and PCIe3.ITESO, A.C

Innovative Techniques for Testing and Diagnosing SoCs

We rely upon the continued functioning of many electronic devices for our everyday welfare, usually embedding integrated circuits that are becoming even cheaper and smaller with improved features. Nowadays, microelectronics can integrate a working computer with CPU, memories, and even GPUs on a single die, namely System-On-Chip (SoC). SoCs are also employed on automotive safety-critical applications, but need to be tested thoroughly to comply with reliability standards, in particular the ISO26262 functional safety for road vehicles. The goal of this PhD. thesis is to improve SoC reliability by proposing innovative techniques for testing and diagnosing its internal modules: CPUs, memories, peripherals, and GPUs. The proposed approaches in the sequence appearing in this thesis are described as follows: 1. Embedded Memory Diagnosis: Memories are dense and complex circuits which are susceptible to design and manufacturing errors. Hence, it is important to understand the fault occurrence in the memory array. In practice, the logical and physical array representation differs due to an optimized design which adds enhancements to the device, namely scrambling. This part proposes an accurate memory diagnosis by showing the efforts of a software tool able to analyze test results, unscramble the memory array, map failing syndromes to cell locations, elaborate cumulative analysis, and elaborate a final fault model hypothesis. Several SRAM memory failing syndromes were analyzed as case studies gathered on an industrial automotive 32-bit SoC developed by STMicroelectronics. The tool displayed defects virtually, and results were confirmed by real photos taken from a microscope. 2. Functional Test Pattern Generation: The key for a successful test is the pattern applied to the device. They can be structural or functional; the former usually benefits from embedded test modules targeting manufacturing errors and is only effective before shipping the component to the client. The latter, on the other hand, can be applied during mission minimally impacting on performance but is penalized due to high generation time. However, functional test patterns may benefit for having different goals in functional mission mode. Part III of this PhD thesis proposes three different functional test pattern generation methods for CPU cores embedded in SoCs, targeting different test purposes, described as follows: a. Functional Stress Patterns: Are suitable for optimizing functional stress during I Operational-life Tests and Burn-in Screening for an optimal device reliability characterization b. Functional Power Hungry Patterns: Are suitable for determining functional peak power for strictly limiting the power of structural patterns during manufacturing tests, thus reducing premature device over-kill while delivering high test coverage c. Software-Based Self-Test Patterns: Combines the potentiality of structural patterns with functional ones, allowing its execution periodically during mission. In addition, an external hardware communicating with a devised SBST was proposed. It helps increasing in 3% the fault coverage by testing critical Hardly Functionally Testable Faults not covered by conventional SBST patterns. An automatic functional test pattern generation exploiting an evolutionary algorithm maximizing metrics related to stress, power, and fault coverage was employed in the above-mentioned approaches to quickly generate the desired patterns. The approaches were evaluated on two industrial cases developed by STMicroelectronics; 8051-based and a 32-bit Power Architecture SoCs. Results show that generation time was reduced upto 75% in comparison to older methodologies while increasing significantly the desired metrics. 3. Fault Injection in GPGPU: Fault injection mechanisms in semiconductor devices are suitable for generating structural patterns, testing and activating mitigation techniques, and validating robust hardware and software applications. GPGPUs are known for fast parallel computation used in high performance computing and advanced driver assistance where reliability is the key point. Moreover, GPGPU manufacturers do not provide design description code due to content secrecy. Therefore, commercial fault injectors using the GPGPU model is unfeasible, making radiation tests the only resource available, but are costly. In the last part of this thesis, we propose a software implemented fault injector able to inject bit-flip in memory elements of a real GPGPU. It exploits a software debugger tool and combines the C-CUDA grammar to wisely determine fault spots and apply bit-flip operations in program variables. The goal is to validate robust parallel algorithms by studying fault propagation or activating redundancy mechanisms they possibly embed. The effectiveness of the tool was evaluated on two robust applications: redundant parallel matrix multiplication and floating point Fast Fourier Transform

Metodologia de monitorização do envelhecimento para aplicações de auto-teste embutido

Dissertação de mestrado, Engenharia Eléctrica e Electrónica, Instituto Superior de Engenharia, Universidade do Algarve, 2013The high integration level achieved as well as complexity and performance enhancements in new nanometer technologies make IC (Integrated Circuits) products very difficult to test. Moreover, long term operation brings aging cumulative degradations, due to new processes and materials that lead to emerging defect phenomena and the consequence are products with increased variability in their behaviour, more susceptible to delay-faults and with a reduced expected lifecycle. The main objectives of this thesis are twofold, as explained in the following. First, a new software tool is presented to generate HDL (Hardware Description Language) for BIST (Built-In Self-Test) structures, aiming delay-faults, and inserted the new auto-test functionality in generic sequential CMOS circuits. The BIST methodology used implements a scan based BIST approach, using a new BIST controller to implement the Launch-On-Shift (LOS) and Launch-On-Capture (LOC) delay-fault techniques. Second, it will be shown that multi-VDD tests in circuits with BIST infra-structures can be used to detect gross delay-faults during on-field operations, and consequently can be used as an aging sensor methodology during circuits’ lifecycle. The discrete set of multi-VDD BIST sessions generates a Voltage Signature Collection (VSC) and the presence of a delay-fault (or a physical defect) modifies the VSC collection, allowing the aging sensor capability. The proposed Design for Testability (DFT) method and tool are demonstrated with extensive SPICE simulation using three ITC’99 benchmark circuits.O elevado nível de integração atingida, complexidade, assim como performances melhoradas em novas tecnologias nanométricas tornam os produtos em circuitos integrados tecnológicos muito difíceis de testar. Para além disso, a operação a longo prazo produz degradações cumulativas pelo envelhecimento dos circuitos, devido a novos processos e materiais que conduzem a novos defeitos e a consequência são produtos com maior variabilidade no seu funcionamento, mais susceptíveis às faltas de atraso e com um tempo de vida menor. Os principais objectivos desta tese são dois, como explicado em seguida. Primeiro, é apresentada uma nova ferramenta de software para gerar estruturas de auto-teste integrado (BIST, Built-In Self-Test) descritas em linguagens de descrição de hardware (HDL, Hardware Description Language), com o objectivo de detectar faltas de atraso, e inserir a nova funcionalidade de auto-teste em circuitos genéricos sequenciais CMOS. A metodologia de BIST utilizada implementa um procedimento baseado em caminhos de deslocamento, utilizando um novo controlador de BIST para implementar técnicas de faltas de atraso, como Launch-On-Shift (LOS) e Launch-On-Capture (LOC). Segundo, irá ser mostrado que testes multi-VDD em circuitos com infra-estruturas de BIST podem ser usados para detectar faltas de atraso grosseiras durante a operação no terreno e, consequentemente, pode ser usado como uma metodologia de sensor de envelhecimento durante o tempo de vida dos circuitos. Um número discreto de sessões BIST multi-VDD geram uma Colecção de Assinaturas de Tensão (Voltage Signature Collection, VSC) e a presença de uma falta de atraso (ou um defeito físico) faz modificar a colecção VSC, comportando-se como sensor de envelhecimento. O trabalho foi iniciado com o estudo do estado da arte nesta área. Assim, foram estudadas e apresentadas no capítulo 2 as principais técnicas de DfT (Design for Testability) disponíveis e utilizadas pela indústria, nomeadamente, as técnicas de SP (Scan Path), de BIST e as técnicas de scan para delay-faults, LOS e LOC. No capítulo 3, ainda referente ao estudo sobre o estado da arte, é apresentado o estudo sobre os fenómenos que provocam o envelhecimento dos circuitos digitais, nomeadamente o NBTI (Negative Bias Temperature Instability), que é considerado o factor mais relevante no envelhecimento de circuitos integrados (especialmente em nanotecnologias). Em seguida, iniciou-se o desenvolvimento do primeiro objectivo. Relativamente a este assunto, começou-se por definir qual o comportamento das estruturas de BIST e como se iriam interligar. O comportamento foi descrito, bloco a bloco, em VHDL comportamental, ao nível RTL (Register Transfer Level). Esta descrição foi então validada por simulação, utilizando a ferramenta ModelSim. Posteriormente, esta descrição comportamental foi sintetizada através da ferramenta Synopsys, com a colaboração do INESC-ID em Lisboa (instituição parceira nestes trabalhos de investigação), e foi obtida uma netlist ao nível de porta lógica, que foi guardada utilizando a linguagem de descrição de hardware Verilog. Assim, obtiveram-se dois tipos de descrição dos circuitos BIST: uma comportamental, em VHDL, e outra estrutural, em Verilog (esta descrição estrutural em Verilog irá permitir, posteriormente, fazer a simulação e análise de envelhecimento). A nova estrutura de BIST obtida é baseada no modelo clássico de BIST, mas apresenta algumas alterações, nomeadamente ao nível da geração de vectores de teste e no controlo e aplicação desses vectores ao circuito. Estas modificações têm como objectivo aumentar a detecção de faltas e permitir o teste de faltas de atraso. É composto por três blocos denominados LFSRs (Linear Feedback Shift Registers), um utilizado para gerar os vectores pseudo-aleatórios para as entradas primárias do circuito, outro para gerar os vectores para a entrada do scan path, e o último utilizado como contador para controlar o número de bits introduzidos no scan path. Relativamente ao controlador, este foi especificamente desenhado para controlar um teste com estratégia de test-per-scan (ou seja, um teste baseado no caminho de varrimento existente no circuito) e tem uma codificação de estados que permite implementar as estratégias de teste de faltas de atraso, Launch-On-Shift (LOS) e Launch-On-Capture (LOC). Na secção de saída do novo modelo de BIST, o processo de compactação usa o mesmo princípio do modelo tradicional, utilizando neste caso um MISR (Multiple Input Signature Register). Ainda relativamente ao primeiro objectivo, seguiu-se o desenvolvimento da ferramenta BISTGen, para automatizar a geração das estruturas de BIST atrás mencionadas, nos dois tipos de descrição, e automaticamente inserir estas estruturas num circuito de teste (CUT, Circuit Under Test). A aplicação de software deve permitir o manuseamento de dois tipos de informação relativa ao circuito: descrição do circuito pelo seu comportamento, em VHDL, e descrição do circuito pela sua estrutura, em Verilog. Deve ter como saída a descrição de hardware supra citada, inserindo todos os blocos integrantes da estrutura num só ficheiro, contendo apenas um dos tipos de linguagem (Verilog ou VHDL), escolhida previamente pelo utilizador. No caso dos LFSRs e do MISR, o programa deve permitir ao utilizador a escolha de LFSRs do tipo linear ou do tipo modular (também conhecidos por fibonacci ou galois), e deve também possuir suporte para automaticamente seleccionar de uma base de dados quais as realimentações necessárias que conduzem à definição do polinómio primitivo para o LFSR. Será necessário ainda criar uma estrutura em base de dados para gerir os nomes e o número de entradas e saídas do circuito submetido a teste, a que chamamos CUT, de forma a simplificar o processo de renomeação que o utilizador poderá ter de efectuar. Dar a conhecer ao programa os nomes das entradas e saídas do CUT é de relevante importância, uma vez que a atribuição de nomes para as entradas e saídas pode vir em qualquer língua ou dialecto, não coincidindo com os nomes padrão normalmente atribuídos. Relativamente às duas linguagens que o programa recebe através do CUT na sua entrada, no caso VHDL após inserir BIST o ficheiro final terá sempre uma estrutura semelhante, qualquer que seja o ficheiro a ser tratado, variando apenas com o hardware apresentado pelo CUT. No entanto, para o caso Verilog a situação será diferente, uma vez que o programa tem de permitir que o ficheiro final gerado possa surgir de duas formas dependendo da escolha desejada. A primeira forma que o software deve permitir para o caso Verilog é gerar um ficheiro contendo módulos, de uma forma semelhante ao que acontece no caso VHDL. No entanto, deve permitir também a obtenção, caso o utilizador solicite, de um ficheiro unificado, sem sub-módulos nos blocos, para que o ficheiro final contenha apenas uma única estrutura, facilitando a sua simulação e análise de envelhecimento nas etapas seguintes. Relativamente ao segundo objectivo, com base no trabalho anterior já efectuado em metodologias para detectar faltas de delay em circuitos com BIST, foi definida uma metodologia de teste para, durante a vida útil dos circuitos, permitir avaliar como vão envelhecendo, tratando-se assim de uma metodologia de monitorização de envelhecimento para circuitos com BIST. Um aspecto fundamental para a realização deste segundo objectivo é podermos prever como o circuito vai envelhecer. Para realizar esta tarefa, sempre subjectiva, utilizou-se uma ferramenta desenvolvida no ISE-UAlg em outra tese de mestrado anterior a esta, a ferramenta AgingCalc. Esta ferramenta inicia-se com a definição, por parte do utilizador, das probabilidades de operação das entradas primárias do circuito (probabilidades de cada entrada estar a ‘0’ ou a ‘1’). De notar que este é o processo subjectivo existente na análise de envelhecimento, já que é impossível prever como um circuito irá ser utilizado. Com base nestas probabilidades de operação, o programa utiliza a estrutura do circuito para calcular, numa primeira instância, as probabilidades dos nós do circuito estarem a ‘0’ ou a ‘1’, e numa segunda instância as probabilidades de cada transístor PMOS estar ligado e com o seu canal em stress (com uma tensão negativa aplicada à tensão VGS e um campo eléctrico aplicado ao dieléctrico da porta). Utilizando fórmulas definidas na literatura para modelação do parâmetro Vth (tensão limiar de condução) do transístor de acordo com um envelhecimento produzido pelo efeito NBTI (Negative Bias Temperature Instability), o programa calcula, para cada ano ou tempo de envelhecimento a considerar, as variações ocorridas no Vth de cada transístor PMOS, com base nas probabilidades e condições de operação previamente definidas, obtendo um novo Vth para cada transístor (os valores prováveis para os transístores envelhecidos). Em seguida, o programa instancia o simulador HSPICE para simular as portas lógicas do circuito, utilizando uma descrição que contém os Vth calculados. Esta simulação permite calcular os atrasos em cada porta para cada ano de envelhecimento considerado, podendo em seguida calcular e obter a previsão para o envelhecimento de cada caminho combinatório do circuito. É de notar que, embora a previsão de envelhecimento seja subjectiva, pois depende de uma previsão de operação, é possível definir diferentes probabilidades de operação de forma a estabelecer limites prováveis para o envelhecimento de cada caminho. Tendo uma ferramenta que permite prever como o circuito irá envelhecer, é possível utilizá-la para modificar a estrutura do circuito e introduzir faltas de delay produzidas pelo envelhecimento por NBTI ao longo dos anos de operação (modelados pelo Vth dos transístores PMOS). Assim, no capítulo 5 irá ser mostrado que testes multi-VDD em circuitos com infra-estruturas de BIST podem ser usados para detectar faltas de atraso grosseiras durante a operação no terreno, podendo em alguns casos identificar variações provocadas pelo envelhecimento em caminhos curtos, e consequentemente, estes testes podem ser usados como uma metodologia de sensor de envelhecimento durante o tempo de vida dos circuitos. Um número discreto de sessões BIST multi-VDD geram uma Colecção de Assinaturas de Tensão (Voltage Signature Collection, VSC) e a presença de uma falta de atraso (ou um defeito físico) faz modificar a colecção VSC, comportando-se como sensor de envelhecimento. O objectivo será, especificando, fazer variar a tensão de alimentação, baixando o seu valor dentro de um determinado intervalo e submetendo o circuito a sucessivas sessões de BIST para cada valor de tensão, até que o circuito retorne uma assinatura diferente da esperada. Este procedimento de simulação será feito para uma maturidade de até 20 anos, podendo o incremento não ser unitário. Na realidade os circuitos nos primeiros anos de vida em termos estatísticos não sofrem envelhecimento a ponto de causar falhas por esse efeito. As falhas que podem acelerar o processo de envelhecimento estão relacionadas com defeitos significativos no processo de fabrico mas que ainda assim não são suficientes para no início do seu ciclo de vida fazer o circuito falhar, tornando-se efectivas após algum tempo de utilização. Os métodos e ferramentas propostos de DfT são demonstrados com extensas simulações VHDL e SPICE, utilizando circuitos de referência

Towards the development of flexible, reliable, reconfigurable, and high-performance imaging systems

Current FPGAs can implement large systems because of the high density of reconfigurable logic resources in a single chip. FPGAs are comprehensive devices that combine flexibility and high performance in the same platform compared to other platform such as General-Purpose Processors (GPPs) and Application Specific Integrated Circuits (ASICs). The flexibility of modern FPGAs is further enhanced by introducing Dynamic Partial Reconfiguration (DPR) feature, which allows for changing the functionality of part of the system while other parts are functioning. FPGAs became an important platform for digital image processing applications because of the aforementioned features. They can fulfil the need of efficient and flexible platforms that execute imaging tasks efficiently as well as the reliably with low power, high performance and high flexibility. The use of FPGAs as accelerators for image processing outperforms most of the current solutions. Current FPGA solutions can to load part of the imaging application that needs high computational power on dedicated reconfigurable hardware accelerators while other parts are working on the traditional solution to increase the system performance. Moreover, the use of the DPR feature enhances the flexibility of image processing further by swapping accelerators in and out at run-time. The use of fault mitigation techniques in FPGAs enables imaging applications to operate in harsh environments following the fact that FPGAs are sensitive to radiation and extreme conditions. The aim of this thesis is to present a platform for efficient implementations of imaging tasks. The research uses FPGAs as the key component of this platform and uses the concept of DPR to increase the performance, flexibility, to reduce the power dissipation and to expand the cycle of possible imaging applications. In this context, it proposes the use of FPGAs to accelerate the Image Processing Pipeline (IPP) stages, the core part of most imaging devices. The thesis has a number of novel concepts. The first novel concept is the use of FPGA hardware environment and DPR feature to increase the parallelism and achieve high flexibility. The concept also increases the performance and reduces the power consumption and area utilisation. Based on this concept, the following implementations are presented in this thesis: An implementation of Adams Hamilton Demosaicing algorithm for camera colour interpolation, which exploits the FPGA parallelism to outperform other equivalents. In addition, an implementation of Automatic White Balance (AWB), another IPP stage that employs DPR feature to prove the mentioned novelty aspects. Another novel concept in this thesis is presented in chapter 6, which uses DPR feature to develop a novel flexible imaging system that requires less logic and can be implemented in small FPGAs. The system can be employed as a template for any imaging application with no limitation. Moreover, discussed in this thesis is a novel reliable version of the imaging system that adopts novel techniques including scrubbing, Built-In Self Test (BIST), and Triple Modular Redundancy (TMR) to detect and correct errors using the Internal Configuration Access Port (ICAP) primitive. These techniques exploit the datapath-based nature of the implemented imaging system to improve the system's overall reliability. The thesis presents a proposal for integrating the imaging system with the Robust Reliable Reconfigurable Real-Time Heterogeneous Operating System (R4THOS) to get the best out of the system. The proposal shows the suitability of the proposed DPR imaging system to be used as part of the core system of autonomous cars because of its unbounded flexibility. These novel works are presented in a number of publications as shown in section 1.3 later in this thesis

Modelling methods for testability analysis of analog integrated circuits based on pole-zero analysis

Testability analysis for analog circuits provides valuable information for designers and test engineers. Such information includes a number of testable and nontestable elements of a circuit, ambiguity groups, and nodes to be tested. This information is useful for solving the fault diagnosis problem. In order to verify the functionality of analog circuits, a large number of specifications have to be checked. However, checking all circuit specifications can result in prohibitive testing times on expensive automated test equipment. Therefore, the test engineer has to select a finite subset of specifications to be measured. This subset of specifications must result in reducing the test time and guaranteeing that no faulty chips are shipped. This research develops a novel methodology for testability analysis of linear analog circuits based on pole-zero analysis and on pole-zero sensitivity analysis. Based on this methodology, a new interpretation of ambiguity groups is provided relying on the circuit theory. The testability analysis methodology can be employed as a guideline for constructing fault diagnosis equations and for selecting the test nodes. We have also proposed an algorithm for selecting specifications that need to be measured. The element testability concept will be introduced. This concept provides the degree of difficulty in testing circuit elements. The value of the element testability can easily be obtained using the pole sensitivities. Then, specifications which need to be measured can be selected based on this concept. Consequently, the selected measurements can be utilized for reducing the test time without sacrificing the fault coverage and maximizing the information for fault diagnosis

Energy-Efficient and Reliable Computing in Dark Silicon Era

Dark silicon denotes the phenomenon that, due to thermal and power constraints, the fraction of transistors that can operate at full frequency is decreasing in each technology generation. Moore’s law and Dennard scaling had been backed and coupled appropriately for five decades to bring commensurate exponential performance via single core and later muti-core design. However, recalculating Dennard scaling for recent small technology sizes shows that current ongoing multi-core growth is demanding exponential thermal design power to achieve linear performance increase. This process hits a power wall where raises the amount of dark or dim silicon on future multi/many-core chips more and more. Furthermore, from another perspective, by increasing the number of transistors on the area of a single chip and susceptibility to internal defects alongside aging phenomena, which also is exacerbated by high chip thermal density, monitoring and managing the chip reliability before and after its activation is becoming a necessity. The proposed approaches and experimental investigations in this thesis focus on two main tracks: 1) power awareness and 2) reliability awareness in dark silicon era, where later these two tracks will combine together. In the first track, the main goal is to increase the level of returns in terms of main important features in chip design, such as performance and throughput, while maximum power limit is honored. In fact, we show that by managing the power while having dark silicon, all the traditional benefits that could be achieved by proceeding in Moore’s law can be also achieved in the dark silicon era, however, with a lower amount. Via the track of reliability awareness in dark silicon era, we show that dark silicon can be considered as an opportunity to be exploited for different instances of benefits, namely life-time increase and online testing. We discuss how dark silicon can be exploited to guarantee the system lifetime to be above a certain target value and, furthermore, how dark silicon can be exploited to apply low cost non-intrusive online testing on the cores. After the demonstration of power and reliability awareness while having dark silicon, two approaches will be discussed as the case study where the power and reliability awareness are combined together. The first approach demonstrates how chip reliability can be used as a supplementary metric for power-reliability management. While the second approach provides a trade-off between workload performance and system reliability by simultaneously honoring the given power budget and target reliability

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast