5,475 research outputs found

    CFD Modelling of the Mixture Preparation in a Modern Gasoline Direct Injection Engine and Correlations with Experimental PN Emissions

    Get PDF
    A detailed 3D CFD analysis of a modern gasoline direct injection (GDI) engine is carried out to reveal the connections between pre-combustion mixture indicators and PN emissions. Firstly, a novel calibration methodology is introduced to accurately predict the widely used characteristics of the high-pressure fuel spray. The methodology utilised the Siemens STAR-CD 3D CFD software environment and employed a combination of statistical and optimization methods supported by experimental data. The calibration process identified dominant factors influencing spray properties and established their optimal levels. The two most used models for fuel atomisation were investigated. The Kelvin–Helmholtz/Rayleigh–Taylor (KH–RT) and Reitz–Diwakar (RD) break-up models were calibrated in conjunction with the Rosin–Rammler (RR) mono-modal droplet size distribution. RD outperformed KH–RT in terms of prediction when comparing numerical spray tip penetration and droplet size characteristics to the experimental counterparts. Then, the modelling protocol incorporated droplet-wall interaction models and a multi-component surrogate fuel blend model. The comprehensive digital model was validated using published data and applied to a modern small-capacity GDI engine. The study explored various engine operating conditions and highlights the contribution of fuel mal-distribution and liquid film retention at spark timing to Particle Number (PN) emissions. Finally, a novel surrogate model was developed to predict the engine-out PN. An extensive CFD analysis was conducted considering part-load operating conditions and variations of engine control variables. The PN surrogate model was developed using an Elastic Net (EN) regression technique, establishing relationships between experimental PN emission levels and modelled, pre-combustion, air-fuel mixture quality indicators. The approach enabled the reliable prediction of engine sooting tendencies without relying on complex measurements of combustion characteristics. These research efforts aim to enhance engine efficiency, reduce emissions, and contribute to the development of a reliable and cost-effective digital toolset for engine development and diagnostics

    Probabilistic design of support structures for offshore wind turbines by means of non-Gaussian spectral analysis

    Get PDF
    Offshore wind energy is of special importance in order to meet the ambitious goals to produce climate-neutral energy. Therefore, an accelerated installation of offshore wind turbines is required. The design is to be achieved with respect to standards and guidelines. Especially probabilistic design methods allow an accurate and economic structural design. Not only the environmental conditions vary during the lifetime, but the short-term loads are also subject of random scattering. For the design of offshore wind turbines, the required load simulations are usually carried out in time domain. In comparison, it is less time-consuming to obtain loads by means of frequency-domain analysis. This is very beneficial for the probabilistic design which requires significantly more load simulations in time domain. However, non-linearities and time-variant behaviour of offshore wind turbines cannot be represented well during the load simulation in frequency domain. Extreme loads and fatigue loads can be calculated by means of frequency-domain analysis. The determination of the distribution functions of extreme values is well established on a theoretical background. As for the fatigue design, different empirical models exist which describe the distribution function of fatigue loads on the basis of frequency-domain analysis. In this thesis, a new model is introduced which leads to more accurate results. Since frequency-domain analysis is not always suitable, the transformation of signals given in frequency domain is required to generate respective random time series. As for the design of offshore wind turbines, only limited recommendations are stated in standards on how to carry out this transformation. Detailed analysis shows that accurate results with respect to wave-induced loads are also obtained for coarser discretisation of spectra. The resulting loads and their statistical properties are still accurate, while the numerical effort can be reduced in comparison to the stated recommendations. On the basis of theoretical findings, time series from load simulations of offshore wind turbine are analysed regarding their spectral properties. Investigations are carried out to evaluate the agreement between the extreme load and fatigue loads which are either simulated or calculated on the basis of the spectral properties. It is also shown that currents within sea states lead to increased fatigue loads

    UMSL Bulletin 2023-2024

    Get PDF
    The 2023-2024 Bulletin and Course Catalog for the University of Missouri St. Louis.https://irl.umsl.edu/bulletin/1088/thumbnail.jp

    LIPIcs, Volume 251, ITCS 2023, Complete Volume

    Get PDF
    LIPIcs, Volume 251, ITCS 2023, Complete Volum

    UMSL Bulletin 2022-2023

    Get PDF
    The 2022-2023 Bulletin and Course Catalog for the University of Missouri St. Louis.https://irl.umsl.edu/bulletin/1087/thumbnail.jp

    HiQR: An efficient algorithm for high dimensional quadratic regression with penalties

    Full text link
    This paper investigates the efficient solution of penalized quadratic regressions in high-dimensional settings. We propose a novel and efficient algorithm for ridge-penalized quadratic regression that leverages the matrix structures of the regression with interactions. Building on this formulation, we develop an alternating direction method of multipliers (ADMM) framework for penalized quadratic regression with general penalties, including both single and hybrid penalty functions. Our approach greatly simplifies the calculations to basic matrix-based operations, making it appealing in terms of both memory storage and computational complexity.Comment: 18 page

    Contactless excitation for electric machines: high temperature superconducting flux pumps

    Get PDF
    With the intensification of global warming and climate change, the pace of transformation to a neutral-emission society is accelerating. In various sectors, electrification has become the absolute tendency to promote such a movement, where electric machines play an important role in the current power generation system. It is widely convinced that electric machines with very high power density are essential for future applications, which, however, can be hardly achieved by conventional technologies. Owing to the maturation of the second generation (2G) high temperature superconducting (HTS) technologies, it has been recognized that superconducting machine could be a competitive candidate to realize the vision. One significant obstacle that hinders the implementation of superconducting machines is how to provide the required magnetic fields, or in other words, how to energise them appropriately. Conventional direct injection is not suitable for HTS machines, because the current leads would bridge ambident temperature to the cryogenic environment, which can impose considerable heat load on the system and increase the operational cost. Thus, an efficient energisation method is demanded by HTS machines. As an emerging technology that can accumulate substantial flux in a closed loop without any physical contact, HTS flux pumps have been proposed as a promising solution. Among the existing developed HTS flux pumps, rotary HTS flux pumps, or so-called HTS dynamo, can output non-zero time-averaged DC voltage and charge the rest of the circuit if a closed loop has been formed. This type of flux pump is often employed together with HTS coils, where the HTS coils can potentially work in the persistent current mode, and act like electromagnets with a considerable magnetic field, having a wide range of applications in industry. The output characteristics of rotary HTS flux pumps have been extensively explored through experiments and finite element method (FEM) simulations, yet the work on constructing statistical models as an alternative approach to capture key characteristics has not been studied. In this thesis, a 2D FEM program has been developed to model the operation of rotary HTS flux pumps and evaluate the effects of different factors on the output voltage through parameter sweeping and analysis of variance. Typical design considerations, including the operating frequency, air gap, HTS tape width, and remanent flux density have been investigated, in particular, the bilateral effect of HTS tape width has been discovered and explained by looking at the averaged integration of the electric field over the HTS tape. Based on the data obtained from various simulations, regression analysis has been conducted through a collection of machine learning methods. It has been demonstrated that the output voltage of a rotary HTS flux pump can be obtained promptly with satisfactory accuracy via Gaussian process regression, aiming to provide a novel approach for future research and a powerful design tool for industrial applications using rotary HTS flux pumps. To enhance the applicability of the proposed statistical models, an updated FEM program has been built to take more parameters into account. The newly added parameters, namely the rotor radius and the width of permanent magnet, together with formerly included ones, should have covered all the key design parameters for a rotary HTS flux pump. Based on data collected from the FEM model, a well-trained semi-deep neural network (DNN) model with a back-propagation algorithm has been put forward and validated. The proposed DNN model is capable of quantifying the output voltage of a rotary HTS flux pump instantly with an overall accuracy of 98% with respect to the simulated values with all design parameters explicitly specified. The model possesses a powerful ability to characterize the output behaviour of rotary HTS flux pumps by integrating all design parameters, and the output characteristics of rotary HTS flux pumps have been successfully demonstrated and visualized using this model. Compared to conventional time-consuming FEM-based numerical models, the proposed DNN model has the advantages of fast learning, accurate computation, as well as strong programmability. Therefore, the DNN model can greatly facilitate the design and optimization process for rotary HTS flux pumps. An executable application has been developed accordingly based on the DNN model, which is believed to provide a useful tool for learners and designers of rotary HTS flux pumps. A new variant inspired by the working principles of rotary HTS flux pumps has been proposed and termed as stationary wave HTS flux pumps. The superiority of this type is that it has a simple structure without any moving components, and it utilises a controllable current-driven electromagnet to provide the required magnetic field. It has been demonstrated that the origin of the output voltage is determined by the asymmetric distribution of the dynamic resistance in the HTS tape, for which the electromagnet must be placed at such a position that its central line is not aligned with that of the HTS tape. A numerical model has been built to simulate the operation of a stationary wave HTS flux pump, based on which the output characteristics and dynamic resistance against various parameters have been investigated. Besides, accurate and reliable statistical models have been proposed to predict the open circuit voltage and effective dynamic resistance by adapting the previously developed machine learning techniques. The work presented in this PhD thesis can bring more insight into HTS flux pumps as an emerging promising contactless energisation technology, and the proposed statistical models can be particularly useful for the design and optimization of such devices

    Random block coordinate methods for inconsistent convex optimisation problems

    Full text link
    We develop a novel randomised block coordinate primal-dual algorithm for a class of non-smooth ill-posed convex programs. Lying in the midway between the celebrated Chambolle-Pock primal-dual algorithm and Tseng's accelerated proximal gradient method, we establish global convergence of the last iterate as well optimal O(1/k)O(1/k) and O(1/k2)O(1/k^{2}) complexity rates in the convex and strongly convex case, respectively, kk being the iteration count. Motivated by the increased complexity in the control of distribution level electric power systems, we test the performance of our method on a second-order cone relaxation of an AC-OPF problem. Distributed control is achieved via the distributed locational marginal prices (DLMPs), which are obtained \revise{as} dual variables in our optimisation framework.Comment: Changed title and revised manuscrip

    Simultaneous Multiparametric and Multidimensional Cardiovascular Magnetic Resonance Imaging

    Get PDF
    No abstract available

    Towards Reliable and Accurate Global Structure-from-Motion

    Get PDF
    Reconstruction of objects or scenes from sparse point detections across multiple views is one of the most tackled problems in computer vision. Given the coordinates of 2D points tracked in multiple images, the problem consists of estimating the corresponding 3D points and cameras\u27 calibrations (intrinsic and pose), and can be solved by minimizing reprojection errors using bundle adjustment. However, given bundle adjustment\u27s nonlinear objective function and iterative nature, a good starting guess is required to converge to global minima. Global and Incremental Structure-from-Motion methods appear as ways to provide good initializations to bundle adjustment, each with different properties. While Global Structure-from-Motion has been shown to result in more accurate reconstructions compared to Incremental Structure-from-Motion, the latter has better scalability by starting with a small subset of images and sequentially adding new views, allowing reconstruction of sequences with millions of images. Additionally, both Global and Incremental Structure-from-Motion methods rely on accurate models of the scene or object, and under noisy conditions or high model uncertainty might result in poor initializations for bundle adjustment. Recently pOSE, a class of matrix factorization methods, has been proposed as an alternative to conventional Global SfM methods. These methods use VarPro - a second-order optimization method - to minimize a linear combination of an approximation of reprojection errors and a regularization term based on an affine camera model, and have been shown to converge to global minima with a high rate even when starting from random camera calibration estimations.This thesis aims at improving the reliability and accuracy of global SfM through different approaches. First, by studying conditions for global optimality of point set registration, a point cloud averaging method that can be used when (incomplete) 3D point clouds of the same scene in different coordinate systems are available. Second, by extending pOSE methods to different Structure-from-Motion problem instances, such as Non-Rigid SfM or radial distortion invariant SfM. Third and finally, by replacing the regularization term of pOSE methods with an exponential regularization on the projective depth of the 3D point estimations, resulting in a loss that achieves reconstructions with accuracy close to bundle adjustment
    • …
    corecore