Multipath Propagation, Mitigation and Monitoring in the Light of Galileo and the Modernized GPS

Among the numerous potential sources of GNSS signal degradation, multipath takes on a prominent position. Unlike other errors like ionospheric or tropospheric path delays which can be modeled or significantly reduced by differential techniques, multipath influences cannot be mitigated by such approaches. Although a lot of multipath mitigation techniques have been proposed and developed in the past among them many receiver internal approaches using special signal processing algorithms multipath (especially multipath with small geometric path delays) still remains a major error source. This is why multipath has been a major design driver for the definition of the Galileo signal structure carried out in the past years and the subsequent signal optimization activities. This thesis tries to provide a broad and comprehensive insight into various aspects of multipath propagation, mitigation and monitoring (without claiming to be exhaustive). It contains an overview of the most important aspects of multipath propagation, including the discussion of different types of multipath signals (e.g. specular vs. diffuse multipath, satellite vs. receiver multipath or hardware-induced multipath), typical characteristics such as periodic signal variations whose frequency depends on the satellite-antenna-reflector geometry and the impact on the signal tracking process within a GNSS receiver. A large part of this thesis is dedicated to aspects of multipath mitigation, first providing a summary of the most common multipath mitigation techniques with a special focus on receiver-internal approaches such as the narrow correlation technique, double-delta correlator implementations, the Early-Late Slope (ELS) technique or Early/Early tracking implementations. However, other mitigation approaches such as using arrays of closely spaced antennas or multipath-limiting antennas are discussed as well. Some of these techniques are used for subsequent multipath performance analyses considering signals of the (modernized) GPS and Galileo. These analyses base on a new methodology to estimate typical and meaningful multipath errors making use of multipath error envelopes that are scaled in a suitable way to account for different multipath environments. It will be shown that typical (mean) multipath errors can be derived from these scaled envelopes by computation of the envelopes running average and that these mean multipath errors are of the same order as multipath errors obtained from complex statistical channel models. Another part of this thesis covers various aspects of multipath detection and monitoring. First, current techniques for multipath detection and monitoring are described and discussed with respect to their benefits and drawbacks or their real-time capability. Among the considered approaches are techniques like code minus carrier monitoring, SNR monitoring, the use of differenced observations or spectral and wavelet analysis. Following this introductory overview, a completely new approach for real-time multipath monitoring by processing multi-correlator observations will be introduced. Previously being used primarily for the detection of Evil Waveforms (signal failures that originate from a malfunction of the satellites signal generation and transmission hardware), the same basic observations (linear combinations of correlator outputs) can be used for the development of a multi-correlator-based real-time multipath monitoring system. The objective is to provide the user with instant information whether or not a signal is affected by multipath. The proposed monitoring scheme has been implemented in the form of a Matlab-based software called RTMM (Real-Time Multipath Monitor) which has been used to verify the monitoring approach and to determine its sensitivity.Die Qualität eines Satellitensignals wird durch eine Vielzahl potenzieller Fehlerquellen negativ beeinflusst. Neben atmosphärischen Einflüssen tragen Mehrwegeeinflüsse einen wesentlichen Anteil zum Gesamtfehlerbudget der Satellitennavigation bei. Während eine ganze Reihe von Fehlereinflüssen durch geeignete Modellierung oder differenzielle Verfahren deutlich reduziert werden können, ist dies durch die räumliche Dekorrelation der Mehrwegeeffekte nicht möglich. Obwohl in der Vergangenheit eine Vielzahl von Verfahren zur Mehrwegereduzierung vorgeschlagen und entwickelt wurden, stellen Mehrwegesignale noch immer eine wesentliche, stets zu berücksichtigende Fehlerquelle dar. Aus diesem Grund spielten die zu erwartenden Mehrwegefehler auch eine sehr wichtige Rolle im Zuge der Definition sowie der Optimierung der Galileo-Signalstruktur und können somit als wesentliches Design-Kriterium angesehen werden. Die vorliegende Arbeit gibt einen umfassenden Einblick in verschiedene Aspekte der Mehrwegeausbreitung, -reduzierung sowie der Detektion und der Überwachung auftretender Mehrwegeeffekte. Die Arbeit beschreibt zunächst die wichtigsten Aspekte der Mehrwegeausbreitung, wobei beispielsweise unterschiedliche Arten von Reflexionen oder unterschiedliche Entstehungsarten ebenso diskutiert werden wie typische Auswirkungen von Mehrwegesignalen wie die Entstehung periodischer Signalvariationen. Solche Signalvariationen sind in starkem Maße abhängig von der durch die Satellitenposition, dem Antennenstandpunkt und der Lage des Reflexionspunktes definierten Geometrie. Die Frequenz dieser Signalvariationen wird für unterschiedliche geometrische Verhältnisse berechnet. Zudem werden der Einfluss bzw. die Auswirkungen einer Mehrwegeausbreitung auf den Signalverarbeitungsprozess in einem GNSS Empfänger aufgezeigt. Einen weiteren Schwerpunkt dieser Arbeit bilden die derzeit gebräuchlichen Methoden zur Reduzierung von Mehrwegeeinflüssen. Dabei werden zunächst die wichtigsten empfängerinternen Ansätze vorgestellt. Aber auch Methoden wie die Verwendung von Antennenarrays oder spezieller Antennen bleiben nicht unberücksichtigt. Einige dieser Methoden bilden im Folgenden die Grundlage für die Bestimmung von typischen Mehrwegefehlern. Dazu wird eine neuartige Methodik vorgestellt, um aus Hüllkurven des Mehrwegefehlers aussagekräftige mittlere Mehrwegefehler zu bestimmen. Hierzu werden die Hüllkurven mit Hilfe einiger aus statistischen Kanalmodellen abgeleiteter Parameter in geeigneter Weise skaliert, um unterschiedlichen Mehrwegeumgebungen Rechnung zu tragen. Es wird gezeigt, dass die mit Hilfe dieser relativ einfachen und effizienten Methode ermittelten Mehrwegefehler in derselben Größenordnung liegen wie die aus komplexen statistischen Kanalmodellen ermittelten Fehler. Einen weiteren Themenkomplex stellen Methoden zur Detektion und zum Monitoring von Mehrwegeeinflüssen dar. Dabei werden zunächst derzeit verwendete Ansätze vorgestellt und hinsichtlich ihrer Vor- und Nachteile sowie hinsichtlich ihrer Echtzeitfähigkeit diskutiert. In Anschluss daran wird ein neuartiger Ansatz zur Detektion und zum Monitoring von Mehrwegesignalen in Echtzeit vorgestellt, der auf der Auswertung von Multikorrelatorbeobachtungen basiert. Ziel dieser Entwicklung ist es, einen potenziellen Nutzer sofort darüber informieren zu können, wenn ein Signal mit Mehrwegefehlern behaftet ist. Der vorgeschlagene Ansatz wurde in Form einer Matlab-basierten implementiert, welche im Folgenden zur Verifizierung und zur Bestimmung der Empfindlichkeit des Verfahrens verwendet wird

GNSS reflectometry for land remote sensing applications

Soil moisture and vegetation biomass are two essential parameters from a scienti c and economical point of view. On one hand, they are key for the understanding of the hydrological and carbon cycle. On the other hand, soil moisture is essential for agricultural applications and water management, and vegetation biomass is crucial for regional development programs. Several remote sensing techniques have been used to measure these two parameters. However, retrieving soil moisture and vegetation biomass with the required accuracy, and the appropriate spatial and temporal resolutions still remains a major challenge. The use of Global Navigation Satellite Systems (GNSS) reflected signals as sources of opportunity for measuring soil moisture and vegetation biomass is assessed in this PhD Thesis. This technique, commonly known as GNSS-Reflectometry (GNSS-R), has gained increasing interest among the scienti c community during the last two decades due to its unique characteristics. Previous experimental works have already shown the capabilities of GNSS-R to sense small reflectivity changes on the surface. The use of the co- and cross-polarized reflected signals was also proposed to mitigate nuisance parameters, such as soil surface roughness, in the determination of soil moisture. However, experimental evidence of the suitability of that technique could not be demonstrated. This work analyses from a theoretical and an experimental point of view the capabilities of polarimetric observations of GNSS reflected signals for monitoring soil moisture and vegetation biomass. The Thesis is structured in four main parts. The fi rst part examines the fundamental aspects of the technique and provides a detailed review of the GNSS-R state of the art for soil moisture and vegetation monitoring. The second part deals with the scattering models from land surfaces. A comprehensive description of the formation of scattered signals from rough surfaces is provided. Simulations with current state of the art models for bare and vegetated soils were performed in order to analyze the scattering components of GNSS reflected signals. A simpli ed scattering model was also developed in order to relate in a straightforward way experimental measurements to soil bio-geophysical parameters. The third part reviews the experimental work performed within this research. The development of a GNSS-R instrument for land applications is described, together with the three experimental campaigns carried out in the frame of this PhD Thesis. The analysis of the GNSS-R and ground truth data is also discussed within this part. As predicted by models, it was observed that GNSS scattered signals from natural surfaces are a combination of a coherent and an incoherent scattering components. A data analysis technique was proposed to separate both scattering contributions. The use of polarimetric observations for the determination of soil moisture was demonstrated to be useful under most soil conditions. It was also observed that forests with high levels of biomass could be observed with GNSS reflected signals. The fourth and last part of the Thesis provides an analysis of the technology perspectives. A GNSS-R End-to-End simulator was used to determine the capabilities of the technique to observe di erent soil reflectivity conditions from a low Earth orbiting satellite. It was determined that high accuracy in the estimation of reflectivity could be achieved within reasonable on-ground resolution, as the coherent scattering component is expected to be the predominant one in a spaceborne scenario. The results obtained in this PhD Thesis show the promising potential of GNSS-R measurements for land remote sensing applications, which could represent an excellent complementary observation for a wide range of Earth Observation missions such as SMOS, SMAP, and the recently approved ESA Earth Explorer Mission Biomass.La humedad del suelo y la biomasa de la vegetaci on son dos parametros clave desde un punto de vista tanto cient co como econ omico. Por una parte son esenciales para el estudio del ciclo del agua y del carbono. Por otra parte, la humedad del suelo es esencial para la gesti on de las cosechas y los recursos h dricos, mientras que la biomasa es un par ametro fundamental para ciertos programas de desarrollo. Varias formas de teledetección se han utilizado para la observaci on remota de estos par ametros, sin embargo, su monitorizaci on con la precisi on y resoluci on necesarias es todav a un importante reto tecnol ogico. Esta Tesis evalua la capacidad de medir humedad del suelo y biomasa de la vegetaci on con señales de Sistemas Satelitales de Posicionamiento Global (GNSS, en sus siglas en ingl es) reflejadas sobre la Tierra. La t ecnica se conoce como Reflectometr í a GNSS (GNSS-R), la cual ha ganado un creciente inter es dentro de la comunidad científ ca durante las dos ultimas d ecadas. Experimentos previos a este trabajo ya demostraron la capacidad de observar cambios en la reflectividad del terreno con GNSS-R. El uso de la componente copolar y contrapolar de la señal reflejada fue propuesto para independizar la medida de humedad del suelo de otros par ametros como la rugosidad del terreno. Sin embargo, no se pudo demostrar una evidencia experimental de la viabilidad de la t ecnica. En este trabajo se analiza desde un punto de vista te orico y experimental el uso de la informaci on polarim etrica de la señales GNSS reflejadas sobre el suelo para la determinaci on de humedad y biomasa de la vegetaci on. La Tesis se estructura en cuatro partes principales. En la primera parte se eval uan los aspectos fundamentales de la t ecnica y se da una revisi on detallada del estado del arte para la observaci on de humedad y vegetaci on. En la segunda parte se discuten los modelos de dispersi on electromagn etica sobre el suelo. Simulaciones con estos modelos fueron realizadas para analizar las componentes coherente e incoherente de la dispersi on de la señal reflejada sobre distintos tipos de terreno. Durante este trabajo se desarroll o un modelo de reflexi on simpli cado para poder relacionar de forma directa las observaciones con los par ametros geof sicos del suelo. La tercera parte describe las campañas experimentales realizadas durante este trabajo y discute el an alisis y la comparaci on de los datos GNSS-R con las mediciones in-situ. Como se predice por los modelos, se comprob o experimentalmente que la señal reflejada est a formada por una componente coherente y otra incoherente. Una t ecnica de an alisis de datos se propuso para la separacióon de estas dos contribuciones. Con los datos de las campañas experimentales se demonstr o el bene cio del uso de la informaci on polarim etrica en las señales GNSS reflejadas para la medici on de humedad del suelo, para la mayor a de las condiciones de rugosidad observadas. Tambi en se demostr o la capacidad de este tipo de observaciones para medir zonas boscosas densamente pobladas. La cuarta parte de la tesis analiza la capacidad de la t ecnica para observar cambios en la reflectividad del suelo desde un sat elite en orbita baja. Los resultados obtenidos muestran que la reflectividad del terreno podr a medirse con gran precisi on ya que la componente coherente del scattering ser a la predominante en ese tipo de escenarios. En este trabajo de doctorado se muestran la potencialidades de la t ecnica GNSS-R para observar remotamente par ametros del suelo tan importantes como la humedad del suelo y la biomasa de la vegetaci on. Este tipo de medidas pueden complementar un amplio rango de misiones de observaci on de la Tierra como SMOS, SMAP, y Biomass, esta ultima recientemente aprobada para la siguiente misi on Earth Explorer de la ESA

Signal processing techniques for GNSS anti-spoofing algorithms

The Global Navigation Satellite Systems (GNSS) usage is growing at a very high rate, and more applications are relying on GNSS for correct functioning. With the introduction of new GNSSs, like the European Galileo and the Chinese Beidou, in addition to the existing ones, the United States Global Positioning System (GPS) and the Russian GLONASS, the applications, accuracy of the position and usage of the signals are increasing by the day. Given that GNSS signals are received with very low power, they are prone to interference events that may reduce the usage or decrease the accuracy. From these interference, the spoofing attack is the one that has drawn major concerns in the GNSS community. A spoofing attack consist on the transmission of GNSS-like signals, with the goal of taking control of the receiver and make it compute an erroneous position and time solution. In the thesis, we focus on the design and validation of different signal processing techniques, that aim at detection and mitigation of the spoofing attack effects. These are standalone techniques, working at the receiver’s level and providing discrimination of spoofing events without the need of external hardware or communication links. Four different techniques are explored, each of them with its unique sets of advantages and disadvantages, and a unique approach to spoofing detection. For these techniques, a spoofing detection algorithm is designed and implemented, and its capabilities are validated by means of a set of datasets containing spoofing signals. The thesis focuses on two different aspects of the techniques, divided as per detection and mitigation capabilities. Both detection techniques are complementary, their joint use is explored and experimental results are shown that demonstrate the advantages. In addition, each mitigation technique is analyzed separately as they require specialized receiver architecture in order to achieve spoofing detection and mitigation. These techniques are able to decrease the effects of the spoofing attacks, to the point of removing the spoofing signal from the receiver and compute navigation solutions that are not controlled by the spoofer and lead in more accurate end results. The main contributions of this thesis are: the description of a multidimensional ratio metric test for distinction between spoofing and multipath effects; the introduction of a cross-check between automatic gain control measurements and the carrier to noise density ratio, for distinction between spoofing attacks and other interference events; the description of a novel signal processing method for detection and mitigation of spoofing effects, based on the use of linear regression algorithms; and the description of a spoofing detection algorithm based on a feedback tracking architecture

Security Evaluation of GNSS Signal Quality Monitoring Techniques against Optimal Spoofing Attacks

GNSSs have a significant impact on everyday life and, therefore, the are increasingly becoming an attractive target for illicit exploitation. As such, anti-spoofing algorithms have become an relevant research topic within the GNSS discipline. This Thesis provides a review of recent research in the field of GNSS spoofing/anti-spoofing, designs a method to generate an energy optimal spoofing signal and evaluates the performance of the anti-spoofing signal quality monitoring techniques against it

Physical Layer Challenges and Solutions in Seamless Positioning via GNSS, Cellular and WLAN Systems

As different positioning applications have started to be a common part of our lives, positioning methods have to cope with increasing demands. Global Navigation Satellite System (GNSS) can offer accurate location estimate outdoors, but achieving seamless large-scale indoor localization remains still a challenging topic. The requirements for simple and cost-effective indoor positioning system have led to the utilization of wireless systems already available, such as cellular networks and Wireless Local Area Network (WLAN). One common approach with the advantage of a large-scale standard-independent implementation is based on the Received Signal Strength (RSS) measurements.This thesis addresses both GNSS and non-GNSS positioning algorithms and aims to offer a compact overview of the wireless localization issues, concentrating on some of the major challenges and solutions in GNSS and RSS-based positioning. The GNSS-related challenges addressed here refer to the channel modelling part for indoor GNSS and to the acquisition part in High Sensitivity (HS)-GNSS. The RSSrelated challenges addressed here refer to the data collection and calibration, channel effects such as path loss and shadowing, and three-dimensional indoor positioning estimation.This thesis presents a measurement-based analysis of indoor channel models for GNSS signals and of path loss and shadowing models for WLAN and cellular signals. Novel low-complexity acquisition algorithms are developed for HS-GNSS. In addition, a solution to transmitter topology evaluation and database reduction solutions for large-scale mobile-centric RSS-based positioning are proposed. This thesis also studies the effect of RSS offsets in the calibration phase and various floor estimators, and offers an extensive comparison of different RSS-based positioning algorithms

Commissioning Perspectives for the ATLAS Pixel Detector

The ATLAS Pixel Detector, the innermost sub-detector of the ATLAS experiment at the Large Hadron Collider, CERN, is an 80 million channel silicon pixel tracking detector designed for high-precision charged particle tracking and secondary vertex reconstruction. It was installed in the ATLAS experiment and commissioning for the first proton-proton collision data taking in 2008 has begun. Due to the complex layout and limited accessibility, quality assurance measurements were continuously performed during production and assembly to ensure that no problematic components are integrated. The assembly of the detector at CERN and related quality assurance measurement results, including comparison to previous production measurements, will be presented. In order to verify that the integrated detector, its data acquisition readout chain, the ancillary services and cooling system as well as the detector control and data acquisition software perform together as expected approximately 8% of the detector system was progressively assembled as close to the final layout as possible. The so-called System Test laboratory setup was operated for several months under experiment-like environment conditions. The interplay between different detector components was studied with a focus on the performance and tunability of the optical data transmission system. Operation and optical tuning procedures were developed and qualified for the upcoming commission ing. The front-end electronics preamplifier threshold tuning and noise performance were studied and noise occupancy of the detector with low sensor bias voltages was investigated. Data taking with cosmic muons was performed to test the data acquisition and trigger system as well as the offline reconstruction and analysis software. The data quality was verified with an extended version of the pixel online monitoring package which was implemented for the ATLAS Combined Testbeam. The detector raw data of the Combined Testbeam and of the System Test cosmic run was converted for offline data analysis with the Pixel bytestream converter which was continuously extended and adapted according to the offline analysis software needs

Advanced Integration of GNSS and External Sensors for Autonomous Mobility Applications

L'abstract è presente nell'allegato / the abstract is in the attachmen

Optimisation de l'infrastructure d'un système de positionnement indoor à base de transmetteurs GNSS

Dans le but de fournir un service GNSS (Global Navigation Satellite System) de localisation continu et disponible partout, les systèmes utilisant des pseudolites et des répéteurs semblent être des solutions pertinentes pour la localisation en indoor. Le système à répélites, inspiré de ces deux méthodes (répéteurs et pseudolites), est aussi proposé pour résoudre cette problématique. Les répélites sont des transmetteurs locaux qui, installés en intérieur, formeront une constellation locale. Ils émettent tous un signal GNSS unique mais déphasé par un délai spécifique à chacun d eux. Ces délais sont nécessaires pour distinguer les différents signaux reçus au niveau du récepteur. Les travaux de cette thèses sont réalisés dans le cadre du système à répélites et dans l objectif d améliorer son architecture et de réduire ses interférences inter-système. En effet, l architecture du système (un peu encombrante) et les interférences éventuelles avec les signaux satellitaires reçus par un récepteur placé à l extérieur font partie des inconvénients de ce système. On cherche donc à traiter ces deux difficultés de façon à minimiser leurs effets. Dans une première partie, on étudie les différents codes GNSS existants dans la littérature ainsi que les techniques de modulation employées. Ceci nous mène à proposer des codes ayant un niveau d interférence équivalent à la référence GPS (obtenue entre deux codes GPS) pour les bandes L1 de GPS et G1 de Glonass. Dans une seconde étape, on développe la modulation IMBOC (Indoor Modified Binary Offset Carrier) pour générer de nouveaux codes caractérisés par des niveaux d interférence réduits (comparés à la référence GPS). Parmi ces codes il y a deux catégories : ceux qui sont adaptés aux systèmes à répélites (émettant un code unique) et ceux qui sont adaptés aux systèmes pseudolites. Une étude théorique et des simulations des niveaux d interférences pour les codes émis dans la bande GPS et Glonass sont réalisées pour déterminer les gains en termes de niveaux de bruit. Ce gain (par rapport à la référence GPS) en puissance d interférence s élève à 16 dB pour Glonass et 20 dB pour GPS. Pour valider les performances de ces codes, on génère les signaux IMBOC et on observe les interférences réelles qu ils induisent sur un récepteur GPS recevant un signal satellitaire. Dans la deuxième partie, on utilise la fibre optique pour transmettre le signal du générateur jusqu aux répélites et pour créer les délais initiaux par propagation du signal dans des bobines de fibre. Ainsi on remplace les câbles coaxiaux et les montages électroniques (de déphasage) par des bobines de fibres plus légères, facile à installer et à faible perte de puissance. Il reste cependant à évaluer avec une précision centimétrique les délais réels induits sur chaque signal dans le but de garantir une précision de localisation inférieure au mètre. Cette précision semble en effet représenter un bon compromis entre complexité globale du système de localisation et réponse à un ensemble suffisant de besoins des utilisateurs potentiels. On développe alors une technique d estimation des délais basée sur la mesure de déphasage (entre deux signaux sinusoïdaux) et une analyse statistique des séries de mesures. Pour finir, on présente quelques résultats de localisation obtenus avec notre système à répélites déployé dans un environnement indoor typiqueIn order to make the GNSS positioning service continuous and available when going from an outdoor to an indoor environment, pseudolite and repeater based systems have been developed. A new system called repealite is a combination of both pseudolites and repeaters. It is based on transmitting a single signal through a set of transmitters (thus creating the local constellation). In order to avoid interference between the repealite signals and to distinguish between them at the receiver s end, each signal is shifted with a specific delay. The research carried out in this PhD aims at optimizing two aspects of the repealite based system. Firstly, we need to mitigate the effect of the interference caused on the satellite signals received outdoors. So we decided to design new codes characterized by low interference levels with outdoor signals. Secondly, we worked on the infrastructure part in order to simplify it and to make it easier to install: this is mainly achieved through the use of optical fibers. In the first part, we study the codes and the modulation techniques currently used in the GNSS systems. Then, we propose a few codes having an interference level equivalent to that of the GPS (obtained when computing two GPS codes). These new codes are compatible with the GPS L1 or the Glonass G1 bands. In a second step, we focus on the modulation techniques and create the so-called IMBOC (Indoor Modified Binary Offset Carrier) that aims at minimizing the interference levels with outdoor signals. With this modulation, we propose new IMBOC codes capable of much lower interference levels than the GPS reference. In order to evaluate the performance of the proposed codes, we carried out a theoretical study, simulations and experimental tests. The interference gain reached about 20 dB on the GPS band and 16 dB on the Glonass one. The proposed codes are divided into two categories: those reserved to the repealite system (using a single code) and families of codes suited to pseudolite based systems. Finally, we generated the IMBOC signals modulated by the new codes and tested the real interference induced on an outdoor receiver tracking the satellite signals. In the second part, we use optical fibers in order to replace the coaxial cables used to transmit signals from the GNSS-like signal generator to the repealites. In addition, the initial delay needed for each repealite is added by propagating the signals through rolls of fibers. Indeed, optical fiber offers advantages such as lightness, flexibility and low power loss that make it suitable to simplify the infrastructure of the system. In order to evaluate the real delays of these various fibers, we develop an estimating method based on phase shift measurements (between two sinusoidal signals) and statistical analysis of the series of measurements. This method should have uncertainties lower than one centimeter in order to insure a sub-meter precision (in absolute positioning with the repealite positioning system). In order to validate this method, we compare it to a GNSS based calibration approach. Finally, we carry out a few positioning tests with the repealite positioning system deployed in a typical indoor environment. These tests deal with absolute and relative positioning and give an idea about the system s performanceEVRY-INT (912282302) / SudocSudocFranceF

GNSS Integrity Monitoring assisted by Signal Processing techniques in Harsh Environments

The Global Navigation Satellite Systems (GNSS) applications are growing and more pervasive in the modern society. The presence of multi-constellation GNSS receivers able to use signals coming from different systems like the american Global Positioning System (GPS), the european Galileo, the Chinese Beidou and the russian GLONASS, permits to have more accuracy in position solution. All the receivers provide always more reliable solution but it is important to monitor the possible presence of problems in the position computation. These problems could be caused by the presence of impairments given by unintentional sources like multipath generated by the environment or intentional sources like spoofing attacks. In this thesis we focus on design algorithms at signal processing level used to assist Integrity operations in terms of Fault Detection and Exclusion (FDE). These are standalone algorithms all implemented in a software receiver without using external information. The first step was the creation of a detector for correlation distortion due to the multipath with his limitations. Once the detection is performed a quality index for the signal is computed and a decision about the exclusion of a specific Satellite Vehicle (SV) is taken. The exclusion could be not feasible so an alternative approach could be the inflation of the variance of the error models used in the position computation. The quality signal can be even used for spoofinng applications and a novel mitigation technique is developed and presented. In addition, the mitigation of the multipath can be reached at pseudoranges level by using new method to compute the position solution. The main contributions of this thesis are: the development of a multipath, or more in general, impairments detector at signal processing level; the creation of an index to measure the quality of a signal based on the detector’s output; the description of a novel signal processing method for detection and mitigation of spoofing effects, based on the use of linear regression algorithms; An alternative method to compute the Position Velocity and Time (PVT) solution by using different well known algorithms in order to mitigate the effects of the multipath on the position domain

Desarrollo de algoritmos para el tratamiento de datos GNSS : su aplicación a los escenarios GPS modernizado y Galileo

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Ciencias Matemáticas, Sección Departamental de Física de la Tierra, Astronomía y Astrofísica I (Geofísica y Meteorología) (Astronomía y Geodesia), leída el 24-07-2012Nowadays, the major GNSS systems are the american GPS and the russian GLONASS, however, in a near future the european project Galileo and the chinesse system COMPASS will become part of the current GNSS scenario. These systems will transmit for the first time three different frequencies, giving place to a multi-system and multi-frequency scenario which will dramatically push the boundaries of the positioning techniques. Currently, one of the most studied positioning techniques is known as Precise Point Positioning (PPP), which is aimed at estimating precise receiver position from undifferenced GNSS code and carrier phase observations and precise satellite products. In this thesis, some new and original algorithms for static PPP have been developed, which are able to deal with the future multi-system and multifrequency GNSS observations. The new algorithms have been named MAP3. In the new approach, the least squares theory is applied twice to estimate the ionospheric delay, initial ambiguities and smoothed pseudodistances from undifferenced observations, which in turn are used to recover the receiver position and its clock offset. MAP3 provides position estimations with an accuracy of 2.5 cm after 2 hours observation and 7 mm in 1 day, being at the same level as other PPP programs and even better results are obtained with MAP3 in short observation periods. Moreover, MAP3 have provided some of the first results in positioning from GIOVE observations and GPC products. In addition, these algorithms have been applied in the analysis of the influence of ionospheric disturbances on the point positioning, concluding that the presence of a high ROT (Rate of TEC), observed at equatorial latitudes, reflects a significant degradation of the point positioning from dual-frequency observations.Actualmente, los únicos sistemas globales de navegación por satélites operativos son GPS y GLONASS, sin embargo, en un futuro cercano el proyecto europeo Galileo y el sistema chino COMPASS entrarán a formar parte del actual escenario GNSS. Estos sistemas emplearán por primera vez, tres frecuencias distintas, dando lugar a un escenario multi-frecuencia que revolucionará las técnicas de posicionamiento. Entre las técnicas actuales de posicionamiento con GNSS destaca el Posicionamiento Preciso Puntual (PPP), que consiste en determinar la posición de un receptor a partir de observaciones de código y fase no differenciadas y productos precisos. En este trabajo de tesis se han desarrollado unos nuevos y originales algoritmos para PPP estático, llamados MAP3, capaces de procesar observaciones GNSS multifrecuencia y multi-sistema del futuro escenario GNSS y determinar la posición de un receptor de forma precisa y exacta. Los algoritmos MAP3 se dividen en dos partes en las cuales se ha aplicado la teoría mínimos cuadrados y se han obtenido expresiones explícitas para estimar el retraso ionosférico, ambigüedades de fase inicial y pseudodistancias suavizadas, que se emplean para determinar la posición del receptor y el offset de su reloj. MAP3 proporciona una estimación de la posición con una exactitud de 2.5 cm tras 2 horas de observación y de 7 mm tras 24 h, resultados que mejoran los obtenidos hasta el momento con otros programas para PPP en periodos cortos de tiempo. Además, MAP3 han proporcionado los primeros resultados en el posicionamiento con observaciones GIOVE y productos del GPC. Por otro lado, estos algoritmos se han aplicado al análisis de los efectos de ciertas perturbaciones ionosféricas en el posicionamiento concluyendo que la presencia de un ROT (Rate of TEC) elevado, observado en latitudes ecuatoriales, refleja una degradación significativa del posicionamiento puntual con observaciones doble frecuencia.Unidad Deptal. de Astronomía y GeodesiaFac. de Ciencias MatemáticasTRUEunpu