A methodical approach to performance measurement experiments : measure and measurement specification

This report describes a methodical approach to performance measurement experiments. This approach gives a blueprint for the whole trajectory from the notion of performance measures and how to define them via planning, instrumentation and execution of the experiments to interpretation of the results. The first stage of the approach, Measurement Initialisation, has been worked out completely. It is shown that a well-defined system description allows a procedural approach to defining performance measures and to identifying parameters that might affect it. For the second stage of the approach, Measurement Planning, concepts are defined that enable a clear experiment description or specification. It is highlighted what actually is being measured when executing an experiment. A brief example that illustrates the value of the method and a comparison with an existing method - that of Jain - complete this report

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Design and evaluation of a connection management mechanism for an ATM-based connectionless service

The Asynchronous Transfer Mode (ATM) has been developed as a connection-oriented technique for the transfer of fixed-size cells over high-speed networks. Many applications, however, require a connectionless network service. In order to provide such a technique, one can built a connectionless service on top of the connection-oriented service. In doing so, the issue of connection management comes into play. In this paper we propose a new connection management mechanism that provides for low bandwidth usage (as compared to a permanent connection) and low delays (as compared to a connection-per-packet approach). We model the new mechanism under two workload scenarios: an ordinary Poisson process and an interrupted Poisson process. We use Markovian techniques as well as matrix-geometric methods to evaluate the new connection management mechanism. From the evaluations it turns out that the proposed mechanism is superior to older approaches (which can be seen as limiting cases)

IP and ATM - a position paper

This paper gives a technical overview of different networking technologies, such as the Internet, ATM. It describes different approaches of how to run IP on top of an ATM network, and assesses their potential to be used as an integrated services network

IP and ATM - current evolution for integrated services

Current and future applications make use of different technologies as voice, data, and video. Consequently network technologies need to support them. For many years, the ATM based Broadband-ISDN has generally been regarded as the ultimate networking technology, which can integrate voice, data, and video services. With the recent tremendous growth of the Internet and the reluctant deployment of public ATM networks, the future development of ATM seems to be less clear than it used to be. In the past IP provided (and was though to provide) only best effort services, thus, despite its world wide diffution, was not considered as a network solution for multimedia application. Currently many of the IETF working groups work on areas related to integrated services, and IP is also proposing itself as networking technology for supporting voice, data, and video services. This paper give a technical overview on the competing integrated services network solutions, such as IP, ATM and the different available and emerging technologies on how to run IP over ATM, and tries to identify their potential and shortcomings

Switching techniques in data-acquisition systems for future experiments

An overview of the current state of development of parallel event-building techniques is given, with emphasis of future applications in the high-rate experiments proposed at the Large Hadron Collider (LHC). The paper describes the ain architectural options in parallel event builders, the proposed event-building architectures for LHC experiments, and the use of standard net- working protocols for event building and their limitations. The main issues around the potential use of circuit switching, message switching and packet switching are examined. Results from various laboratory demonstrator systems are presented

The design and application of power line carrier communication and remote meter reading for use in integrated services and broadband - integrated services digital networks

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN009939 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Performance of a connectionless protocol over ATM

Recent studies show the existence of a demand for a connectionless broadband service. In order to cope with this demand, a connectionless protocol for the B-ISDN needs to be designed. Such a protocol should make use of ATM and the ATM Adaptation Layer. It needs to specify destination and bandwidth of connections to the ATM network without advance knowledge of the traffic that has to be transferred over these connection. A possible mechanism which can cope with this problem, the 'On-demand Connection with Delayed Release' (OCDR) mechanism, is described. Its eficient operation is based on the assumption that there exists a certain correlation between subsequently arriving CL packets. Two different arrival processes are used to evaluate the performance of the OCDR mechanism: a Poisson arrival process, and a Markov Modulated Poisson Process (MMPP) which models a bursty trafic source. Markov models of the OCDR mechanism have been constructed for both arrival processes. For the madel with Poisson arrivals, a closed form solution is presented. The model with MMPP arrivals is solved numerically.\ud Compared to a 'Permanent Connection' mechanism significant bandwidth reductions can be obtained provided that the offered trafic has a bursty nature. Furthermore, the OCDR mechanism has the advantageous property that the obtained average node delay is not strongly related to the intensity and burstiness of the offered trafic

Results of the SURFnet4 management project 1997

This technical report bundles the five reports that were written for two SURFnet4 projects in 1997. Each report discusses a different research aspect of the SURFnet4 ATM network. The topics are 1) the Architecture of a ATM PVC Management Tool, 2) Reporting on the Use of the ATM Network, 3) SVCs in a Production Environment, 4) Quality of Service Measures, 5) Operation and Maintenance (OAM)