Forwarding strategies and optimal power allocation for coherent and noncoherent relay networks

In fading wireless channels, relays are used with the aim of achieving diversity and thus overall performance gain. In cooperative relay networks, various forwarding techniques like amplify and forward (AF) and decode and forward (DF) are used at the relay for better throughput and improved BER performance than traditional multihop systems. In a power constrained environment, the performance can be further improved by using an optimal power allocation strategy. The relative position of the relay with respect to the source and destination also has an immense effect on the efficacy of the relay.;We position the relay at various positions in a planar grid, with the position of source and destination being fixed, and we investigate the effect that the positioning of the relay has on a relaying system. We use our three terminal model to optimize the power allocation under total transmit power constraint, to maximize the instantaneous signal-to-noise ratio (SNR) at destination, and thus achieve improved throughput and BER performance, while using AF and DF protocols. We evaluate the performance of our system for both coherent and noncoherent modulation in a Rayleigh block fading channel. Quadrature phase shift keying (QPSK) is used in the coherent case and 4-Frequency shift keying (4-FSK) is used in the noncoherent case.;Previous works involving power allocation schemes have mainly concentrated on optimizing information theoretic quantities like capacity and outage probability. We derive expressions for instantaneous SNR using our model and optimize the power allocation based on that, with the final aim of achieving improved uncoded BER. Analytical expressions of the instantaneous SNR at the destination are derived for both AF and DF. These expressions are numerically optimized to obtain an optimum power allocation strategy for each position of the relay in both the AF and DF schemes using coherent or noncoherent detection.;We compare the performance of the AF and DF protocols based on their positional BER and throughput at different received SNR and notice that our power optimized schemes outperform existing power control schemes at certain areas. Finally we also identify the shape and area of the regions where relaying would provide performance gains for both the protocols at different received SNRs

Performance Analysis of Train Communication Systems

Trains are considered as a highly efficient transport mode which generate significant challenges in terms of their communication systems. For improved safety, to cope with the expected rapid increase in traffic, and to meet customer demands, an enhanced and reliable communication system is required for high-speed trains (HSRs). Mobile phone and laptop users would like to make use of the non-negligible time that they spend commuting but current HSR communication systems have a foreseeable end to their lifetime and a reliable, efficient, and fast communication replacement system has become essential. Encouraged by the use of existing power line networks for communication purposes, this research investigates the possibility of developing a train communication system based on the use of overhead line equipment (OLE). The ABCD transfer line model is developed to represent the transfer function of the OLE channel and is evaluated using computer simulations. The simulations of the OLE system used are based on orthogonal frequency division multiplexing as the chosen modulation scheme. Within the train, for the provision of broadband services, developing a reliable communication system which is a combination of power line communication and optical wireless communication services using visible light communication (VLC) is considered. Mathematical methods were developed for these networks to assess the overall capacities and outage probabilities of the hybrid systems. Derivation of such analytical expressions offered opportunities to investigate the impact of several system parameters on the performance of the system. To assess the possibility of improving the performance of the proposed integrated systems, their performance in the presence of different relaying protocols has been comprehensively analyzed in terms of capacity and outage probability. This thesis studied the outage probability and energy per bit consumption performance of different relaying protocols over the VLC channel. Accurate analytical expressions for the overall outage probability and energyper-bit consumption of the proposed system configurations, including the single-hop and multi-hop approaches were derived. It was found that the transfer function of the OLE channel can be represented by the two-port network model. It was also revealed that transmission over OLE is negatively affected by the speed of the train, frequency, and length of the OLE link. In train, relay-based communication systems can provide reliable connectivity to the end-user. However, choosing an optimal system configuration can enhance system performance. It was also shown that increasing relay numbers on the network contributes to the total power consumption of the system

Energy Efficiency

This book is one of the most comprehensive and up-to-date books written on Energy Efficiency. The readers will learn about different technologies for energy efficiency policies and programs to reduce the amount of energy. The book provides some studies and specific sets of policies and programs that are implemented in order to maximize the potential for energy efficiency improvement. It contains unique insights from scientists with academic and industrial expertise in the field of energy efficiency collected in this multi-disciplinary forum

Continuous Integration/Continuous Delivery Pipeline for Air Force Distributed Common Ground System (AF DCGS)

AF DCGS has a recognized need to improve speed of delivery for modification and sustainment of the weapon system. Given that the program office implemented a Continuous Integration/Continuous Delivery (CI/CD) process for the sole purpose of delivering capability to the field faster, there is a need to measure and report the pipeline throughput. This research conducts an independent evaluation of the newly implemented pipeline within AF DCGS’s existing integration and test laboratories. Actual project data from the agile development work environments is studied and hypothesis tests are conducted to substantiate that the CI/CD pipeline improved the speed of delivery. The research definitively shows that the CI/CD pipeline improves speed of delivery for AF DCGS from a range of 22% to 119% depending on the type of work product. Lastly, from observation and detailed study of the processes and data, recommendations are made for standardization and automated metrics collection, with suggestions for additional research to further characterize the pipeline with the intent to create a predictive model for more accurate estimation of delivery timelines

New Approaches Using Cognitive Radio in Green Networking

The green networks are energy-efficient network architectures and we consider them as the basis of the wireless communication optimizing energy usage. Indeed, future communication technologies are moving in this direction, meaning that they will be less energy-intensive and, in some cases, even energy self-sufficient. Specifically, cognitive radio (CR) networks, cooperative relay networks, and non-orthogonal multiple access (NOMA) techniques have been considered as effective means to facilitate energy harvesting (EH) and a power spectrum allocation for the minimization of total transmit power, hence, making the wireless communication greener. The dissertation consists of three research sections corresponding to the aims. The first aim deals with an radio frequency (RF) wireless energy transfer model for D2D systems. In order to harvest more energy, a multiple-antenna base station and a power beacon are adopted for the D2D transmission network. We derive expressions outage probability in closed-forms. Further, independent simulations are used to validate the exactness of the theoretical expressions. In the second aim, new cooperative system models are proposed and studied. To reach the second aim, the secondary source acts as a relay and employs Amplify and Forward (AF) mode to serve distant NOMA users under a given interference constraint. To provide a detailed examination of the system performance metrics, we derived closed-form formulas for the outage probability and average throughput of the multi-users in the presence of interference constraints. In the last aim of the dissertation, we designed a new system model for a hybrid satellite-terrestrial cognitive network (HSTCN) relying on NOMA interconnecting a satellite and multiple terrestrial nodes. Reliability and security of transmission were studied to minimize the total transmit power. To reach the third aim, we examined the following performance factors: outage probability, hardware impairment, intercept probability, and average throughput. The novel closed-forms expressions of these performance factors are derived. The last but not at least, we simulated the new HSTCN system model. The achieved results figured that the new proposed approaches make it possible to take into account service quality requirements and are applicable in future green networking.Zelené sítě jsou energeticky efektivní síťové architektury a považujeme je za základ bezdrátové komunikace optimalizující spotřebu energie. Tímto směrem se ubírají budoucí komunikační technologie, což znamená, že budou méně energeticky náročné a v některých případech dokonce energeticky soběstačné. Kognitivní rádiové (CR) sítě, kooperativní relay sítě a neortogonální vícenásobné přístupové (NOMA) techniky jsou považovány za účinný prostředek k usnadnění získávání energie (EH) a přidělování výkonového spektra pro minimalizaci celkového vysílacího výkonu, díky čemuž je bezdrátová komunikace zelenější. Disertační práce se skládá ze tří výzkumných částí odpovídajících cílům. První cíl se zabývá modelem bezdrátového přenosu radiofrekvenční (RF) energie pro systémy D2D. Aby bylo možné získat více energie, jsou pro přenosovou D2D síť použity základnové stanice s více anténami a napájecím radiomajákem. Pro navržený model jsou odvozeny pravděpodobnosti výpadků, kdy tyto výrazy jsou v uzavřené formě. Dále jsou k ověření platnosti získaných teoretických výrazů použity nezávislé simulace. Ve druhém cíli jsou navrženy a zkoumány nové modely kooperativního systému. Aby bylo dosaženo druhého cíle, sekundární zdroj funguje jako relay uzel a využívá režim AF (Amplify and Forward), který slouží vzdáleným NOMA uživatelům za specifických interferenčních podmínek. Abychom poskytli podrobné zhodnocení výkonnostních metrik systému, odvodili jsme vztahy v uzavřené formě pro pravděpodobnost výpadků a průměrnou propustnost více uživatelů za přítomnosti interferenčních omezení. V posledním cíli disertační práce jsme navrhli nový systémový model pro hybridní satelitně-terestrickou kognitivní síť (HSTCN) založenou na neortogonálním vícenásobném přístupu (NOMA) propojující satelit a více terestrických uzlů. Zkoumána byla spolehlivost a zabezpečení přenosu s důrazem na minimalizaci celkového vysílacího výkonu. Pro dosažení třetího cíle jsme zkoumali následující výkonnostní faktory: pravděpodobnost výpadku, poškození hardwaru, pravděpodobnost zachycení a průměrnou propustnost. Pro tyto výkonnostní faktory jsou odvozeny v uzavřených formách nové výrazy. V neposlední řadě jsme rovněž simulovali nový systémový HSTCN model. Dosažené výsledky potvrdily, že nově navržené přístupy umožňují zohledňovat požadavky na kvalitu služeb a jsou použitelné v budoucích zelených sítích.440 - Katedra telekomunikační technikyvyhově

Design of Network Coding Schemes and RF Energy Transfer in Wireless Communication Networks

This thesis focuses on the design of network coding schemes and radio frequency (RF) energy transfer in wireless communication networks. During the past few years, network coding has attracted significant attention because of its capability to transmit maximum possible information in a network from multiple sources to multiple destinations via a relay. Normally, the destinations are only able to decode the information with sufficient prior knowledge. To enable the destinations to decode the information in the cases with less/no prior knowledge, a pattern of nested codes with multiple interpretations using binary convolutional codes is constructed in a multi-source multi-destination wireless relay network. Then, I reconstruct nested codes with convolutional codes and lattice codes in multi-way relay channels to improve the spectrum efficiency. Moreover, to reduce the high decoding complexity caused by the adopted convolutional codes, a network coded non-binary low-density generator matrix (LDGM) code structure is proposed for a multi-access relay system. Another focus of this thesis is on the design of RF-enabled wireless energy transfer (WET) schemes. Much attention has been attracted by RF-enabled WET technology because of its capability enabling wireless devices to harvest energy from wireless signals for their intended applications. I first configure a power beacon (PB)-assisted wireless-powered communication network (PB-WPCN), which consists of a set of hybrid access point (AP)-source pairs and a PB. Both cooperative and non-cooperative scenarios are considered, based on whether the PB is cooperative with the APs or not. Besides, I develop a new distributed power control scheme for a power splitting-based interference channel (IFC) with simultaneous wireless information and power transfer (SWIPT), where the considered IFC consists of multiple source-destination pairs

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

A survey on reconfigurable intelligent surfaces: wireless communication perspective

Using reconfigurable intelligent surfaces (RISs) to improve the coverage and the data rate of future wireless networks is a viable option. These surfaces are constituted of a significant number of passive and nearly passive components that interact with incident signals in a smart way, such as by reflecting them, to increase the wireless system's performance as a result of which the notion of a smart radio environment comes to fruition. In this survey, a study review of RIS-assisted wireless communication is supplied starting with the principles of RIS which include the hardware architecture, the control mechanisms, and the discussions of previously held views about the channel model and pathloss; then the performance analysis considering different performance parameters, analytical approaches and metrics are presented to describe the RIS-assisted wireless network performance improvements. Despite its enormous promise, RIS confronts new hurdles in integrating into wireless networks efficiently due to its passive nature. Consequently, the channel estimation for, both full and nearly passive RIS and the RIS deployments are compared under various wireless communication models and for single and multi-users. Lastly, the challenges and potential future study areas for the RIS aided wireless communication systems are proposed

Secure communication protocol design for buffer-aided relaying systems

指導教員：姜　暁

Cooperative diversity architecture for wireless networks

The burgeoning demand for wireless networks necessitates reliable and energy-efficient communication architectures that are robust to the impairments of the wireless medium. Cooperative communication emerges as an appropriate technique that mitigates the severe effects of channel impairments through the use of cooperative diversity. Notwithstanding the fact that cooperative diversity is a very suitable technique to provide robust and reliable communication, the realization of cooperation idea precipitates many technical challenges that are associated with the overhaul of the wireless network design. This dissertation proposes a cooperative diversity architecture for wireless networks, that spans the physical, medium access and routing layers with parameters (jointly) optimized for overall system performance, taking into account the cost of cooperation in each layer. First, we present a new cooperative MAC protocol, COMAC, that enables cooperation of multiple relays in a distributed fashion. Through the proposed protocol, we investigate and demonstrate at what rate and for which scenarios cooperation brings benefits in terms of throughput and energy-efficiency. Our results demonstrate that cooperation initiation has a significant cost on both the throughput and energy-efficiency, which have been often disregarded in the literature. We next study the energy minimal joint cooperator selection and power assignment problem under transmit power constraints such that the cooperative transmissions satisfy an average bit error rate (BER) target. We derive the average BER of the cooperative system and we propose a simple yet close approximation to facilitate cooperator selection methods with closed form power assignment solutions. We formulate the joint cooperator selection and power assignment problem, we present the optimal solution (O-CSPA) and we also propose a distributed implementation (D-CSPA). Our results demonstrate that smart cooperator selection is essential, as it provides efficient resource allocation with reduced overhead leading to improved system performance. Our implementation and simulations of D-CSPA algorithm in COMAC protocol demonstrate that our distributed algorithm causes minimal overhead, yields improved throughput and reduced delay, while reducing the energy consumption. Finally, we propose a cooperative routing framework and a cross-layer architecture, RECOMAC, for wireless ad hoc networks. The RECOMAC architecture facilitates formation of cooperative sets on the fly in a decentralized and distributed fashion, requiring no overhead for relay selection and actuation, and resulting in opportunistically formed cooperative links that provide robust and reliable end-to-end communication, without the need for establishing a prior non-cooperative route, unlike existing schemes. The results demonstrate that under wireless channel impairments, such as fading and path loss, our cooperative forwarding framework and cross-layer architecture, RECOMAC significantly improve the system performance, in terms of throughput and delay, as compared to non-cooperative conventional layered network architecture with AODV routing over IEEE 802.11 MAC