Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin

Studies in Software-Defined Radio System Implementation

Over the past decade, software-defined radios (SDRs) have an increasingly prevalent aspect of wireless communication systems. Different than traditional hardware radios which implement radio protocols using static electrical circuit, SDRs implement significant aspects of physical radio protocol using software programs running on a host processor. Because they use software to implement most of the radio functionality, SDRs are much more easily modified, edited, and upgraded than their hardware-defined counterparts. Consequently, researchers and developers have been developing previously hardware-defined radio systems within software. Thus, communication standards can be tested under different conditions or swapped out entirely by simply changing some code. Additionally, developers hope to implement more advanced functionality with SDRs such as cognitive radios that can sense the conditions of the environment and change parameters or protocol accordingly. This paper will outline the major aspects of SDRs including their explanation, advantages, and architecture. As SDRs have become more commonplace, many companies and organizations have developed hardware front-ends and software packages to help develop software radios. The most prominent hardware front-ends to date have been the USRP hardware boards. Additionally, many software packages exist for SDR development, including the open source GNU Radio and OSSIE and the closed source Simulink and Labview SDR packages. Using these development tools, researchers have developed many of the most relevant radio standards. This paper will explain the major hardware and software development tools for creating SDRs, and it will explain some of the most important SDR projects that have been implemented to date

Reconfigurable Radio System Test bed for security research

Technological progress on the digital processing has opened the way to a novel implementation approach for wireless communication platforms where most of the digital signal processing is done in software rather than in hardware. Such systems have been known as Software Defined Radio (SDR) or Reconfigurable Radio Systems (RRS). A typical SDR/RRS is able to execute all the radio frequency and base-band processing though software components rather then hardware components as in conventional radio communication systems. This capability provides a high level of reconfigurability and the possibility to implement a number of different algorithms for digital processing. Therefore, SDR/RRS can be used for a variety or purposes including the possibility of implementing wireless security attacks against conventional communication systems. In this technical report, we present an application of the SDR/RRS platform to implement a security attack against a DECT platform. The SDR/RRS platform has been used to implement a DECT demodulator and a processing module to eavesdrop and capture user and control data transmitted by a DECT system. The commercially available Universal Software Radio Peripheral (USRP) has been used as SDR/RRS platform for the development of the prototype. The paper presents the technical challenges and implementation details in the development of the prototype and an overview of the capabilities of the USRP to implement wireless security attacks. The SDR/RRS platform used in the project is quite versatile and it can be used for a number of other applications related to DECT or other wireless communication systems.JRC.G.6-Security technology assessmen

Software-Defined Radio Demonstrators: An Example and Future Trends

Software-defined radio requires the combination of software-based signal processing and the enabling hardware components. In this paper, we present an overview of the criteria for such platforms and the current state of development and future trends in this area. This paper will also provide details of a high-performance flexible radio platform called the maynooth adaptable radio system (MARS) that was developed to explore the use of software-defined radio concepts in the provision of infrastructure elements in a telecommunications application, such as mobile phone basestations or multimedia broadcasters