Wireless power transfer for combined sensing and stimulation in implantable biomedical devices

Actuellement, il existe une forte demande de Headstage et de microsystèmes intégrés implantables pour étudier l’activité cérébrale de souris de laboratoire en mouvement libre. De tels dispositifs peuvent s’interfacer avec le système nerveux central dans les paradigmes électriques et optiques pour stimuler et surveiller les circuits neuronaux, ce qui est essentiel pour découvrir de nouveaux médicaments et thérapies contre des troubles neurologiques comme l’épilepsie, la dépression et la maladie de Parkinson. Puisque les systèmes implantables ne peuvent pas utiliser une batterie ayant une grande capacité en tant que source d’énergie primaire dans des expériences à long terme, la consommation d’énergie du dispositif implantable est l’un des principaux défis de ces conceptions. La première partie de cette recherche comprend notre proposition de la solution pour diminuer la consommation d’énergie des microcircuits implantables. Nous proposons un nouveau circuit de décalage de niveau qui convertit les niveaux de signaux sub-seuils en niveaux ultra-bas à haute vitesse en utilisant une très faible puissance et une petite zone de silicium, ce qui le rend idéal pour les applications de faible puissance. Le circuit proposé introduit une nouvelle topologie de décaleur de niveau de tension utilisant un condensateur de décalage de niveau pour augmenter la plage de tensions de conversion, tout en réduisant considérablement le retard de conversion. Le circuit proposé atteint un délai de propagation plus court et une zone de silicium plus petite pour une fréquence de fonctionnement et une consommation d’énergie donnée par rapport à d’autres solutions de circuit. Les résultats de mesure sont présentés pour le circuit proposé fabriqué dans un processus CMOS TSMC de 0,18- mm. Le circuit présenté peut convertir une large gamme de tensions d’entrée de 330 mV à 1,8 V et fonctionner sur une plage de fréquence de 100 Hz à 100 MHz. Il a un délai de propagation de 29 ns et une consommation d’énergie de 61,5 nW pour les signaux d’entrée de 0,4 V, à une fréquence de 500 kHz, surpassant les conceptions précédentes. La deuxième partie de cette recherche comprend nos systèmes de transfert d’énergie sans fil proposé pour les applications optogénétiques. L’optogénétique est la combinaison de la méthode génétique et optique d’excitation, d’enregistrement et de contrôle des neurones biologiques. Ce système combine plusieurs technologies telles que les MEMS et la microélectronique pour collecter et transmettre les signaux neuronaux et activer un stimulateur optique via une liaison sans fil. Puisque les stimulateurs optiques consomment plus de puissance que les stimulateurs électriques, l’interface utilise la transmission de puissance par induction en utilisant des moyens innovants au lieu de la batterie avec la petite capacité comme source d’énergie.Notre première contribution dans la deuxième partie fournit un système de cage domestique intelligent basé sur des barrettes multi-bobines superposées à travers un récepteur multicellulaire implantable mince de taille 1×1 cm2, implanté sous le cuir chevelu d’une souris de laboratoire, et unité de gestion de l’alimentation intégrée. Ce système inductif est conçu pour fournir jusqu’à 35,5 mW de puissance délivrée à un émetteur-récepteur full duplex de faible puissance entièrement intégré pour prendre en charge des implants neuronaux à haute densité et bidirectionnels. L’émetteur (TX) utilise une bande ultra-large à impulsions radio basée sur des approches de combinaison, et le récepteur (RX) utilise une topologie à bande étroite à incrémentation de 2,4 GHz. L’émetteur-récepteur proposé fournit un débit de données de liaison montante TX à 500 Mbits/s double et un débit de données de liaison descendante RX à 100 Mbits/s, et est entièrement intégré dans un processus CMOS TSMC de 0,18-mm d’une taille totale de 0,8 mm2 . La puissance peut être délivrée à partir d’un signal de porteuse de 13,56-MHz avec une efficacité globale de transfert de puissance supérieure à 5% sur une distance de séparation allant de 3 cm à 5 cm. Notre deuxième contribution dans les systèmes de collecte d’énergie porte sur la conception et la mise en oeuvre d’une cage domestique de transmission de puissance sans fil (WPT) pour une plate-forme de neurosciences entièrement sans fil afin de permettre des expériences optogénétiques ininterrompues avec des rongeurs de laboratoire vivants. La cage domestique WPT utilise un nouveau réseau hybride de transmetteurs de puissance (TX) et des résonateurs multi-bobines segmentés pour atteindre une efficacité de transmission de puissance élevée (PTE) et délivrer une puissance élevée sur des distances aussi élevées que 20 cm. Le récepteur de puissance à bobines multiples (RX) utilise une bobine RX d’un diamètre de 1 cm et une bobine de résonateur d’un diamètre de 1,5 cm. L’efficacité moyenne du transfert de puissance WPT est de 29, 4%, à une distance nominale de 7 cm, pour une fréquence porteuse de 13,56 MHz. Il a des PTE maximum et minimum de 50% et 12% le long de l’axe Z et peut délivrer une puissance constante de 74 mW pour alimenter le headstage neuronal miniature. En outre, un dispositif implantable intégré dans un processus CMOS TSMC de 0,18-mm a été conçu et introduit qui comprend 64 canaux d’enregistrement, 16 canaux de stimulation optique, capteur de température, émetteur-récepteur et unité de gestion de l’alimentation (PMU). Ce circuit est alimenté à l’intérieur de la cage du WPT à l’aide d’une bobine réceptrice d’un diamètre de 1,5 cm pour montrer les performances du circuit PMU. Deux tensions régulées de 1,8 V et 1 V fournissent 79 mW de puissance pour tout le système sur une puce. Notre dernière contribution est un système WPT insensible aux désalignements angulaires pour alimenter un headstage pour des applications optogénétiques qui a été précédemment proposé par le Laboratoire de Microsystèmes Biomédicaux (BioML-UL) à ULAVAL. Ce système est la version étendue de notre deuxième contribution aux systèmes de collecte d’énergie.Dans la version mise à jour, un récepteur de puissance multi-bobines utilise une bobine RX d’un diamètre de 1,0 cm et une nouvelle bobine de résonateur fendu d’un diamètre de 1,5 cm, qui résiste aux défauts d’alignement angulaires. Dans cette version qui utilise une cage d’animal plus petite que la dernière version, 4 résonateurs sont utilisés côté TX. De plus, grâce à la forme et à la position de la bobine de répéteur L3 du côté du récepteur, la liaison résonnante hybride présentée peut correctement alimenter la tête sans interruption causée par le désalignement angulaire dans toute la cage de la maison. Chaque 3 tours du répéteur RX a été enveloppé avec un diamètre de 1,5 cm, sous différents angles par rapport à la bobine réceptrice. Les résultats de mesure montrent un PTE maximum et minimum de 53 % et 15 %. La méthode proposée peut fournir une puissance constante de 82 mW pour alimenter le petit headstage neural pour les applications optogénétiques. De plus, dans cette version, la performance du système est démontrée dans une expérience in-vivo avec une souris ChR2 en mouvement libre qui est la première expérience optogénétique sans fil et sans batterie rapportée avec enregistrement électrophysiologique simultané et stimulation optogénétique. L’activité électrophysiologique a été enregistrée après une stimulation optogénétique dans le Cortex Cingulaire Antérieur (CAC) de la souris.Our first contribution in the second part provides a smart home-cage system based on overlapped multi-coil arrays through a thin implantable multi-coil receiver of 1×1 cm2 of size, implantable bellow the scalp of a laboratory mouse, and integrated power management circuits. This inductive system is designed to deliver up to 35.5 mW of power delivered to a fully-integrated, low-power full-duplex transceiver to support high-density and bidirectional neural implants. The transmitter (TX) uses impulse radio ultra-wideband based on an edge combining approach, and the receiver (RX) uses a 2.4- GHz on-off keying narrow band topology. The proposed transceiver provides dual-band 500-Mbps TX uplink data rate and 100-Mbps RX downlink data rate, and it is fully integrated into 0.18-mm TSMC CMOS process within a total size of 0.8 mm2. The power can be delivered from a 13.56-MHz carrier signal with an overall power transfer efficiency above 5% across a separation distance ranging from 3 cm to 5 cm. Our second contribution in power-harvesting systems deals with designing and implementation of a WPT home-cage for a fully wireless neuroscience platform for enabling uninterrupted optogenetic experiments with live laboratory rodents. The WPT home-cage uses a new hybrid parallel power transmitter (TX) coil array and segmented multi-coil resonators to achieve high power transmission efficiency (PTE) and deliver high power across distances as high as 20 cm. The multi-coil power receiver (RX) uses an RX coil with a diameter of 1 cm and a resonator coil with a diameter of 1.5 cm. The WPT home-cage average power transfer efficiency is 29.4%, at a nominal distance of 7 cm, for a power carrier frequency of 13.56-MHz. It has maximum and minimum PTE of 50% and 12% along the Z axis and can deliver a constant power of 74 mW to supply the miniature neural headstage. Also, an implantable device integrated into a 0.18-mm TSMC CMOS process has been designed and introduced which includes 64 recording channels, 16 optical stimulation channels, temperature sensor, transceiver, and power management unit (PMU). This circuit powered up inside the WPT home-cage using receiver coil with a diameter of 1.5 cm to show the performance of the PMU circuit. Two regulated voltages of 1.8 V and 1 V provide 79 mW of power for all the system on a chip. Our last contribution is an angular misalignment insensitive WPT system to power up a headstage which has been previously proposed by the Biomedical Microsystems Laboratory (BioML-UL) at ULAVAL for optogenetic applications. This system is the extended version of our second contribution in power-harvesting systems. In the updated version a multi-coil power receiver uses an RX coil with a diameter of 1.0 cm and a new split resonator coil with a diameter of 1.5 cm, which is robust against angular misalignment. In this version which is using a smaller animal home-cage than the last version, 4 resonators are used on the TX side. Also, thanks to the shape and position of the repeater coil of L3 on the receiver side, the presented hybrid resonant link can properly power up the headstage without interruption caused by the angular misalignment all over the home-cage. Each 3 turns of the RX repeater has been wrapped up with a diameter of 1.5 cm, in different angles compared to the receiver coil. Measurement results show a maximum and minimum PTE of 53 % and 15 %. The proposed method can deliver a constant power of 82 mW to supply the small neural headstage for the optogenetic applications. Additionally, in this version, the performance of the system is demonstrated within an in-vivo experiment with a freely moving ChR2 mouse which is the first fully wireless and batteryless optogenetic experiment reported with simultaneous electrophysiological recording and optogenetic stimulation. Electrophysiological activity was recorded after delivering optogenetic stimulation in the Anterior Cingulate Cortex (ACC) of the mouse.Currently, there is a high demand for Headstage and implantable integrated microsystems to study the brain activity of freely moving laboratory mice. Such devices can interface with the central nervous system in both electrical and optical paradigms for stimulating and monitoring neural circuits, which is critical to discover new drugs and therapies against neurological disorders like epilepsy, depression, and Parkinson’s disease. Since the implantable systems cannot use a battery with a large capacity as a primary source of energy in long-term experiments, the power consumption of the implantable device is one of the leading challenges of these designs. The first part of this research includes our proposed solution for decreasing the power consumption of the implantable microcircuits. We propose a novel level shifter circuit which converting subthreshold signal levels to super-threshold signal levels at high-speed using ultra low power and a small silicon area, making it well-suited for low-power applications such as wireless sensor networks and implantable medical devices. The proposed circuit introduces a new voltage level shifter topology employing a level-shifting capacitor to increase the range of conversion voltages, while significantly reducing the conversion delay. The proposed circuit achieves a shorter propagation delay and a smaller silicon area for a given operating frequency and power consumption compared to other circuit solutions. Measurement results are presented for the proposed circuit fabricated in a 0.18-mm TSMC CMOS process. The presented circuit can convert a wide range of the input voltages from 330 mV to 1.8 V, and operate over a frequency range of 100-Hz to 100-MHz. It has a propagation delay of 29 ns, and power consumption of 61.5 nW for input signals 0.4 V, at a frequency of 500-kHz, outperforming previous designs. The second part of this research includes our proposed wireless power transfer systems for optogenetic applications. Optogenetics is the combination of the genetic and optical method of excitation, recording, and control of the biological neurons. This system combines multiple technologies such as MEMS and microelectronics to collect and transmit the neuronal signals and to activate an optical stimulator through a wireless link. Since optical stimulators consume more power than electrical stimulators, the interface employs induction power transmission using innovative means instead of the battery with the small capacity as a power source

An Implantable Peripheral Nerve Recording and Stimulation System for Experiments on Freely Moving Animal Subjects

A new study with rat sciatic nerve model for peripheral nerve interfacing is presented using a fully-implanted inductively-powered recording and stimulation system in a wirelessly-powered standard homecage that allows animal subjects move freely within the homecage. The Wireless Implantable Neural Recording and Stimulation (WINeRS) system offers 32-channel peripheral nerve recording and 4-channel current-controlled stimulation capabilities in a 3 × 1.5 × 0.5 cm3 package. A bi-directional data link is established by on-off keying pulse-position modulation (OOK-PPM) in near field for narrow-band downlink and 433 MHz OOK for wideband uplink. An external wideband receiver is designed by adopting a commercial software defined radio (SDR) for a robust wideband data acquisition on a PC. The WINeRS-8 prototypes in two forms of battery-powered headstage and wirelessly-powered implant are validated in vivo, and compared with a commercial system. In the animal study, evoked compound action potentials were recorded to verify the stimulation and recording capabilities of the WINeRS-8 system with 32-ch penetrating and 4-ch cuff electrodes on the sciatic nerve of awake freely-behaving rats. Compared to the conventional battery-powered system, WINeRS can be used in closed-loop recording and stimulation experiments over extended periods without adding the burden of carrying batteries on the animal subject or interrupting the experiment

Wireless, battery-free optoelectronic systems as subdermal implants for local tissue oximetry

Monitoring regional tissue oxygenation in animal models and potentially in human subjects can yield insights into the underlying mechanisms of local O2-mediated physiological processes and provide diagnostic and therapeutic guidance for relevant disease states. Existing technologies for tissue oxygenation assessments involve some combination of disadvantages in requirements for physical tethers, anesthetics, and special apparatus, often with confounding effects on the natural behaviors of test subjects. This work introduces an entirely wireless and fully implantable platform incorporating (i) microscale optoelectronics for continuous sensing of local hemoglobin dynamics and (ii) advanced designs in continuous, wireless power delivery and data output for tether-free operation. These features support in vivo, highly localized tissue oximetry at sites of interest, including deep brain regions of mice, on untethered, awake animal models. The results create many opportunities for studying various O2-mediated processes in naturally behaving subjects, with implications in biomedical research and clinical practice.Center for Bio-Integrated Electronics at Northwestern University; Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF) [ECCS-1542205]; Materials Research Science and Engineering Center [DMR-1720139]; State of Illinois; Northwestern University; Developmental Therapeutics Core at Northwestern University; Robert H. Lurie Comprehensive Cancer Center [NCI CA060553]Open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

A Fully Implantable Opto-Electro Closed-Loop Neural Interface for Motor Neuron Disease Studies

This paper presents a fully implantable closed-loop device for use in freely moving rodents to investigate new treatments for motor neuron disease. The 0.18 µm CMOS integrated circuit comprises 4 stimulators, each featuring 16 channels for optical and electrical stimulation using arbitrary current waveforms at frequencies from 1.5 Hz to 50 kHz, and a bandwidth programmable front-end for neural recording. The implant uses a Qi wireless inductive link which can deliver >100 mW power at a maximum distance of 2 cm for a freely moving rodent. A backup rechargeable battery can support 10 mA continuous stimulation currents for 2.5 hours in the absence of an inductive power link. The implant is controlled by a graphic user interface with broad programmable parameters via a Bluetooth low energy bidirectional data telemetry link. The encapsulated implant is 40 mm × 20 mm × 10 mm. Measured results are presented showing the electrical performance of the electronics and the packaging method

Improving the mechanistic study of neuromuscular diseases through the development of a fully wireless and implantable recording device

Neuromuscular diseases manifest by a handful of known phenotypes affecting the peripheral nerves, skeletal muscle fibers, and neuromuscular junction. Common signs of these diseases include demyelination, myasthenia, atrophy, and aberrant muscle activity—all of which may be tracked over time using one or more electrophysiological markers. Mice, which are the predominant mammalian model for most human diseases, have been used to study congenital neuromuscular diseases for decades. However, our understanding of the mechanisms underlying these pathologies is still incomplete. This is in part due to the lack of instrumentation available to easily collect longitudinal, in vivo electrophysiological activity from mice. There remains a need for a fully wireless, batteryless, and implantable recording system that can be adapted for a variety of electrophysiological measurements and also enable long-term, continuous data collection in very small animals. To meet this need a miniature, chronically implantable device has been developed that is capable of wirelessly coupling energy from electromagnetic fields while implanted within a body. This device can both record and trigger bioelectric events and may be chronically implanted in rodents as small as mice. This grants investigators the ability to continuously observe electrophysiological changes corresponding to disease progression in a single, freely behaving, untethered animal. The fully wireless closed-loop system is an adaptable solution for a range of long-term mechanistic and diagnostic studies in rodent disease models. Its high level of functionality, adjustable parameters, accessible building blocks, reprogrammable firmware, and modular electrode interface offer flexibility that is distinctive among fully implantable recording or stimulating devices. The key significance of this work is that it has generated novel instrumentation in the form of a fully implantable bioelectric recording device having a much higher level of functionality than any other fully wireless system available for mouse work. This has incidentally led to contributions in the areas of wireless power transfer and neural interfaces for upper-limb prosthesis control. Herein the solution space for wireless power transfer is examined including a close inspection of far-field power transfer to implanted bioelectric sensors. Methods of design and characterization for the iterative development of the device are detailed. Furthermore, its performance and utility in remote bioelectric sensing applications is demonstrated with humans, rats, healthy mice, and mouse models for degenerative neuromuscular and motoneuron diseases

Coupled resonator based wireless power transfer for bioelectronics

Implantable and wearable bioelectronics provide the ability to monitor and modulate physiological processes. They represent a promising set of technologies that can provide new treatment for patients or new tools for scientific discovery, such as in long-term studies involving small animals. As these technologies advance, two trends are clear, miniaturization and increased sophistication i.e. multiple channels, wireless bi-directional communication, and responsiveness (closed-loop devices). One primary challenge in realizing miniaturized and sophisticated bioelectronics is powering. Integration and development of wireless power transfer (WPT) technology, however, can overcome this challenge. In this dissertation, I propose the use of coupled resonator WPT for bioelectronics and present a new generalized analysis and optimization methodology, derived from complex microwave bandpass filter synthesis, for maximizing and controlling coupled resonator based WPT performance. This newly developed set of analysis and optimization methods enables system miniaturization while simultaneously achieving the necessary performance to safely power sophisticated bioelectronics. As an application example, a novel coil to coil based coupled resonator arrangement to wirelessly operate eight surface electromyography sensing devices wrapped circumferentially around an able-bodied arm is developed and demonstrated. In addition to standard coil to coil based systems, this dissertation also presents a new form of coupled resonator WPT system built of a large hollow metallic cavity resonator. By leveraging the analysis and optimization methods developed here, I present a new cavity resonator WPT system for long-term experiments involving small rodents for the first time. The cavity resonator based WPT arena exhibits a volume of 60.96 x 60.96 x 30.0 cm3. In comparison to prior state of the art, this cavity resonator system enables nearly continuous wireless operation of a miniature sophisticated device implanted in a freely behaving rodent within the largest space. Finally, I present preliminary work, providing the foundation for future studies, to demonstrate the feasibility of treating segments of the human body as a dielectric waveguide resonator. This creates another form of a coupled resonator system. Preliminary experiments demonstrated optimized coupled resonator wireless energy transfer into human tissue. The WPT performance achieved to an ultra-miniature sized receive coil (2 mm diameter) is presented. Indeed, optimized coupled resonator systems, broadened to include cavity resonator structures and human formed dielectric resonators, can enable the effective use of coupled resonator based WPT technology to power miniaturized and sophisticated bioelectronics

Wireless Power Transfer for Miniature Implantable Biomedical Devices

Miniature implantable electronic devices play increasing roles in modern medicine. In order to implement these devices successfully, the wireless power transfer (WPT) technology is often utilized because it provides an alternative to the battery as the energy source; reduces the size of implant substantially; allows the implant to be placed in a restricted space within the body; reduces both medical cost and chances of complications; and eliminates repeated surgeries for battery replacements. In this work, we present our recent studies on WPT for miniature implants. First, a new implantable coil with a double helix winding is developed which adapts to tubularly shaped organs within the human body, such as blood vessels and nerves. This coil can be made in the planar form and then wrapped around the tubular organ, greatly simplifying the surgical procedure for device implantation. Second, in order to support a variety of experiments (e.g., drug evaluation) using a rodent animal model, we present a special WPT transceiver system with a relatively large power transmitter and a miniature implantable power receiver. We present a multi-coil design that allows steady power transfer from the floor of an animal cage to the bodies of a group of free-moving laboratory rodents

An optogenetic headstage for optical stimulation and neural recording in life science applications

L'optogénétique est une nouvelle méthode de contrôle de l’activité neuronale dans laquelle la lumière est employée pour activer ou arrêter certains neurones. Dans le cadre de ce travail, un dispositif permettant l’acquisition de signaux neuronaux et conduisant à une stimulation optogénétique de façon multicanale et temps-réel a été conçu. Cet outil est muni de deux canaux de stimulation optogénétique et de deux canaux de lecture des signaux neuronaux. La source de lumière est une DEL qui peut consommer jusqu’à 150 milliampères. Les signaux neuronaux acquis sont transmis à un ordinateur par une radio. Les dimensions sont d’environ 20×20×15 mm3 et le poids est de moins de 7 grammes, rendant l’appareil utile pour les expériences sur les petits animaux libres. Selon nos connaissances actuelles, le résultat de ce projet constitue le premier appareil de recherche optogénétique sans-fil, compact offrant la capture de signaux cérébraux et la stimulation optique simultanée.Optogenetics is a new method for controlling the neural activity where light is used to activate or silence, with high spatial and temporal resolution, genetically light-sensitized neurons. In optogenetics, a light source such as a LED, targets light-sensitized neurons. In this work, a light-weight wireless animal optogenetic headstage has been designed that allows multi-channel simultaneous real-time optical stimulation and neural recording. This system has two optogenetic stimulation channels and two electrophysiological reading channels. The optogenetic stimulation channels benefit from high-power LEDs (sinking 150 milliamps) with flexible stimulation patterns and the recorded neural data is wirelessly sent to a computer. The dimensions of the headstage are almost 20×20×15 mm3 and it weighs less than 7 grams. This headstage is suitable for tests on small freely-moving rodents. To the best of our knowledge, this is the first reported fully wireless headstage to offer simultaneous multichannel optical stimulation along with multichannel neural recording capability

Base station with wireless powering and communication for small rodents monitoring

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)Dealing with medical complications such as arrhythmia, diabetes, deafness, and neurological diseases is a challenging task that is generally tackled resorting to drugs. Nevertheless, some diseases are resistant to drug-based treatments, which leads to a demand for alternative solutions. One of these can be the use of implantable devices, which play a fundamental role in monitoring and treating diseases in modern medicine. However, prior to their use in humans, extensive and rigorous tests in animal models must be performed to assess their safety and efficacy. In a first stage, these tests are performed in lab animals, usually rodents. For an implantable medical device to be tested in rats, it must be as small and lightweight as possible and not have wired connections to the exterior. This is desirable to minimize its impact in the rodent’s normal behavior, which can influence the experimental data. As such, it is necessary to implement wireless communication and power transfer modules in the implant. This avoids problems related with the device’s size, shape, weight and biocompatibility. Additionally, wirelessly recharging the battery maximizes the implant’s lifetime and eliminates the need to perform surgical procedures to change batteries, thus reducing shock and infection risk for the animal. An implantable device for the treatment of epilepsy, developed in the scope of an ongoing research project, must be implanted and tested in rats. As such, a base station that allows to compensate the aforementioned issues was required. Due to the inexistence of communication and wireless powering systems that are suitable to the problem at hand, these were proposed, developed and tested during this dissertation’s work. The developed communication system allows sending and receiving data with OOK modulation at a 1 GHz frequency, with a communication distance of up to 1.5 meters which can be extended with the use of amplifiers. This system is regulated by a microcontroller and it is composed of several blocks, which facilitates its modification to tackle problems with diverse specifications. The wireless power transfer system is based in a two-element antenna array which allows for the maximum power to be focused at the implant through a tracking mechanism, thus maximizing the power transfer. The tracking system resorts to a feedback mechanism that receives information from the implant concerning the amount of power it is receiving at any given moment. With this information, an algorithm controls the phase difference of the excitation signals of the antenna array to ensure that maximum power is transferred to the implant. The system resorts to this information at a rate of 1 kHz, and wireless power transfer occurs at a 2 GHz frequency with a theoretical maximum tracking speed of 3.41 m/s. Since it is also necessary to supply power and recharge the batteries of implants placed at a considerable depth inside the human body, it is useful to study the power distribution inside biological tissues. In order to do this, a system capable of mapping power distributions inside liquid phantoms was developed. Knowing that biological tissues interact with and absorb electromagnetic radiation, it was necessary to study its dosage. To achieve this, a specific absorption rate (SAR) mapping system for biological tissue liquid phantoms was developed, allowing to conclude if the RF exposure safety limits are respected or not. This system was then validated resorting to electromagnetic simulation tools.O tratamento de complicações médicas, tais como a arritmia, diabetes, surdez e doenças neurológicas, é um desafio árduo que é, tipicamente, resolvido recorrendo a medicamentos. No entanto, algumas doenças são resistentes a este tipo de tratamento, o que leva a uma procura por soluções alternativas. Umas destas reside na utilização de dispositivos implantáveis, que são parte fundamental da monitorização e tratamento de doenças na medicina moderna. Contudo, previamente à sua aplicação em humanos, extensos e rigorosos testes em modelos animais devem sem realizados por forma a avaliar a segurança e eficácia do dispositivo. Numa primeira fase, estes testes são feitos em animais de laboratório, normalmente roedores. Para que seja possível testar um dispositivo médico implantável neste tipo de animais, este deve ser o mais pequeno e leve possível e não ter ligações para o exterior. Isto é desejável para minimizar o seu impacto no comportamento natural do roedor, o que pode influenciar os resultados obtidos nas experiências. Para tal, é necessária a utilização de módulos de comunicação e carregamento sem fios no implante. Isto permite evitar problemas relacionados com o seu tamanho, forma, peso e biocompatibilidade. Adicionalmente, o carregamento sem fios da bateria permite maximizar o tempo de vida do implante e elimina a necessidade de procedimentos cirúrgicos para trocar baterias, reduzindo assim o choque para o animal e o risco de infeções. Um dispositivo implantável para o tratamento da epilepsia, desenvolvido no âmbito de um projeto de investigação, necessita ser implantado em roedores para ser testado. Para tal, é necessário utilizar uma estação base que permita solucionar os problemas previamente mencionados. Devido à inexistência de sistemas de comunicação e carregamento sem fios adequados ao problema em mãos, estes foram propostos, desenvolvidos e testados no âmbito da presente dissertação. O sistema de comunicação desenvolvido permite o envio e receção de dados com modulação OOK a uma frequência de 1 GHz, permitindo uma distância de comunicação de até 1.5 m, que pode ser aumentada recorrendo a amplificadores. Este sistema é regulado por um microcontrolador e composto por diversos blocos, o que facilita a sua adaptabilidade para as mais diversas aplicações. O sistema de transferência de energia sem fios baseia-se num array de antenas com dois elementos que permite focar o máximo da potência no implante através de um mecanismo de seguimento, maximizando assim a transferência de energia. Este sistema de seguimento recorre a um mecanismo de feedback que recebe informação do implante sobre a quantidade de potência que este está a receber num dado instante. Com esta informação, um algoritmo controla a diferença de fase dos sinais de excitação do array de antenas e faz com que o máximo de potência seja transmitida para o implante. O sistema adquire esta informação a uma taxa de 1 kHz, sendo que a transferência de potência sem fios ocorre a uma frequência de 2 GHz e com uma velocidade teórica máxima de seguimento de 3.41 m/s. Uma vez que também é necessário fornecer energia e recarregar baterias de implantes colocados a uma certa profundidade, torna-se necessário estudar a distribuição de potência no interior de tecidos biológicos. Para tal, foi desenvolvido um sistema que permite fazer o mapeamento de níveis de potência no interior de um fantoma líquido. Sabendo-se que os tecidos biológicos interagem com a radiação eletromagnética e absorvem-na, foi necessário o estudo da sua dosagem. Consequentemente, foi desenvolvido um sistema que permite avaliar os níveis de SAR em fantomas líquidos de tecido biológico, permitindo concluir se os limites de segurança destes níveis são ultrapassados. Este sistema foi posteriormente validado com recursos a ferramentas de simulação eletromagnética.Projeto de investigação PTDC/EEI-TEL/5250/2014, suportado por fundos FEDER POCI-01-145-FEDER-16695