248 research outputs found

    Potential of Spaceborne X & L-Band SAR-Data for Soil Moisture Mapping Using GIS and its Application to Hydrological Modelling: the Example of Gottleuba Catchment, Saxony / Germany

    Get PDF
    Hydrological modelling is a powerful tool for hydrologists and engineers involved in the planning and development of integrated approach for the management of water resources. With the recent advent of computational power and the growing availability of spatial data, RS and GIS technologies can augment to a great extent the conventional methods used in rainfall runoff studies; it is possible to accurately describe watershed characteristics in particularly when determining runoff response to rainfall input. The main objective of this study is to apply the potential of spaceborne SAR data for soil moisture retrieval in order to improve the spatial input parameters required for hydrological modelling. For the spatial database creation, high resolution 2 m aerial laser scanning Digital Terrain Model (DTM), soil map, and landuse map were used. Rainfall records were transformed into a runoff through hydrological parameterisation of the watershed and the river network using HEC-HMS software for rainfall runoff simulation. The Soil Conservation Services Curve Number (SCS-CN) and Soil Moisture Accounting (SMA) loss methods were selected to calculate the infiltration losses. In microwave remote sensing, the study of how the microwave interacts with the earth terrain has always been interesting in interpreting the satellite SAR images. In this research soil moisture was derived from two different types of Spaceborne SAR data; TerraSAR-X and ALOS PALSAR (L band). The developed integrated hydrological model was applied to the test site of the Gottleuba Catchment area which covers approximately 400 sqkm, located south of Pirna (Saxony, Germany). To validate the model historical precipitation data of the past ten years were performed. The validated model was further optimized using the extracted soil moisture from SAR data. The simulation results showed a reasonable match between the simulated and the observed hydrographs. Quantitatively the study concluded that based on SAR data, the model could be used as an expeditious tool of soil moisture mapping which required for hydrological modelling

    Validation of a CFD model for the evaluation of urban microclimate at high latitudes: A case study in Trondheim, Norway

    Get PDF
    The urban microclimate is a rapidly evolving field of research gaining increasing interest from public authorities and researchers. However, studies at high-latitude cities are scarce and researchers primarily focus on summerly overheating. This study focuses on the validation process of a CFD model that applies the 3D URANS approach with the realisable k-e turbulence model at a highly complex urban area in Trondheim, Norway (63.4° N) during autumn. The CFD model features a polyhedral grid of the urban environment, including geometrically explicitly modelled buildings and trees in the area of interest. Furthermore, solar radiation, longwave radiation exchange, heat transfer from the buildings, heat storage in the urban surface, and the thermal effects of evapotranspiration from trees and grass surfaces are considered. The CFD model is validated with experimental results from a network of five mobile and one reference weather stations in the study area, providing hourly-averaged measurements for wind speed, wind direction (only reference weather station) and air temperature for two 48-h periods from September 27–28 and October 19–20. The results show that the CFD model is well able to reproduce the measured conditions at the area of interest with a mean R2 of 0.60, 0.63, and 0.96 for wind speed, wind direction and air temperature, respectively, at the reference weather station. It will be used in future studies, including the analysis of the impact of urban microclimate on buildings’ energy performance, outdoor thermal and pedestrian wind comfort.publishedVersio

    A robust surface matching technique for coastal geohazard monitoring

    Get PDF
    Coastal geohazards, such as landslides, mudflows, and rockfalls, represent a major driver for coastal change in many regions of the world, and often impinge on aspects of the human and natural environment. In such cases, there is a pressing need for the development of more effective monitoring strategies, particularly given the uncertainties associated with the impact of future climate change. Traditional survey approaches tend to suffer from limited spatial resolution, while contemporary techniques are generally unsuitable in isolation, due to the often complex coastal topography. To address these issues, this thesis presents the development and application of a strategy for integrated remote monitoring of coastal geohazards. The monitoring strategy is underpinned by a robust least squares surface matching technique, which has been developed to facilitate change detection through the reliable reconciliation of multi-temporal, multi-sensor datasets in dynamic environments. Specifically, this research has concentrated on integrating the developing techniques of airborne and terrestrial laser-scanning. In addition, archival aerial photography has been incorporated in order to provide a historical context for analysis of geohazard development. Robust surface matching provides a mechanism for reliable registration of DEM surfaces contaminated by regions of difference, which may arise through geohazard activity or vegetation change. The development of this algorithm has been presented, and its potential demonstrated through testing with artificial datasets. The monitoring strategy was applied to the soft-cliff test site of Filey Bay, North Yorkshire. This highlighted the viability of the robust matching algorithm, demonstrating the effectiveness of this technique for absolute orientation of DEMs derived from archival aerial photography. Furthermore, the complementary qualities of airborne and terrestrial laser scanning have been confirmed, particularly in relation to their value for multi-scale terrain monitoring. Issues of transferability were explored through application of the monitoring strategy to the hard rock environment of Whitby East Cliff. Investigations in this challenging environment confirmed the potential of the robust matching algorithm, and highlighted a number of valuable issues in relation to the monitoring techniques. Investigations at both test sites enabled in-depth assessment and quantification of geohazard activity over extended periods of time.EThOS - Electronic Theses Online ServiceEnglish Heritage : British Geological SurveyGBUnited Kingdo

    Remote Sensing and UAVs for the Geomorphological and Habitat Analysis in Ephemeral and Permanent Mediterranean Streams

    Full text link
    Tesis por compendio[ES] Los ecosistemas riparios presentan una gran variabilidad, desde un punto de vista geomorfológico como hidrológico y ecológico, incluyendo las complejas interacciones que la morfología y la vegetación de ribera puede presentar. La vegetación se presenta como un factor físico muy influyente en los sistemas fluviales, con una relación directa en los procesos geomorfológicos que tienen lugar en los corredores fluviales. La detección, monitoreo y evaluación de los procesos que se desarrollan en el espacio ripario son clave a la hora de poder entender las funciones ecológicas y el desarrollo de dichos hábitats, y por tanto para tomar decisiones para su conservación y restauración. Según la distribución de especies y los rasgos de las plantas, las comunidades vegetales y su dinámica presentan distintas características en el ecosistema ripario, a las cuales los métodos de detección y monitoreo deben adaptarse. Los constantes cambios que sufren estos espacios a lo largo del tiempo se deben en gran parte a procesos físicos relacionados con las dinámicas de erosión y sedimentación, las variaciones de la trayectoria del cauce, variaciones en la distribución de especies y vegetación en el bosque de ribera, etc., pero también se deben al impacto antropogénico, que puede llegar a generar grandes desajustes en la dinámica ecológica de los ecosistemas en cuestión. Debido a las interacciones de diversos procesos y alteraciones antropogénicas, y las complejas dinámicas espacio-temporales, resulta necesario continuar desarrollando metodologías teóricas y prácticas para la monitorización y caracterización de estos ecosistemas. La teledetección, incluyendo el uso de drones, se presenta como una herramienta muy interesante y óptima para el mapeo y recogida de información en estos espacios naturales. Los beneficios que demuestran las aeronaves no tripuladas -UAV- incluyen las mejoras en la resolución espacial y temporal de los datos capturados, así como la cartografía de áreas extensas en poco tiempo, lo que los convierte en instrumentos clave en tareas de gestión y conservación de los espacios riparios. La necesidad de estudiar la dinámica geomorfológica que se produce en los cauces fluviales ha sido la principal motivación en los estudios que se presentan en esta tesis doctoral. Los capítulos 2 y 3 se basan en técnicas de captura de datos con láser escáner terrestre (TLS) y en el modelado de los datos obtenidos en vuelos fotogramétricos de UAV. Con ellos se han caracterizado los procesos que tienen lugar en una cierta área de estudio, un cauce efímero del sureste de la Península Ibérica, la Rambla de la Azohía (Murcia). Estos estudios también han permitido comparar el ajuste y precisión de los datos capturados a partir de dos técnicas distintas. Además, el interés en caracterizar los cauces fluviales con un flujo permanente ha motivado el estudio de la topografía sumergida en un tramo de río, segmentado por tipos de mesohábitat. Así pues, el capítulo 4 presenta un algoritmo y una herramienta de corrección para el efecto de la refracción en un tramo del rio Palancia (Castellón), para llevar a cabo la correcta representación de la morfología del lecho sumergido. A partir de la metodología planteada y el algoritmo desarrollado, es posible minimizar los efectos de distorsión debidos a la presencia del agua, para obtener la reconstrucción tridimensional del lecho a partir de imágenes tomadas con UAV. La construcción del modelo 3D se llevó a cabo mediante la técnica de Structure from Motion. Finalmente, y como elemento clave en la dinámica de los ecosistemas riparios, el capítulo 5 desarrolla una metodología para clasificar las fases de sucesión de la vegetación del bosque ripario. Dichas fases de sucesión se basan en la metodología del proyecto RIPFLOW, que también está implementada en el modelo dinámico CASiMiR-vegetation.[CA] Els ecosistemes riparis presenten una gran variabilitat, des d'un punt de vista geomorfològic com a hidrològic i ecològic, incloent les complexes interaccions que la morfologia i la vegetació de ribera pot presentar. La vegetació es presenta com un factor físic molt influent en els sistemes fluvials, amb una relació directa en els processos geomorfològics que tenen lloc en els corredors fluvials. La detecció, monitoratge i avaluació dels processos que es desenvolupen en l'espai ripari són clau a l'hora de poder entendre les funcions ecològiques i el desenvolupament d'aquests hàbitats, i per tant per a prendre decisions per a la seua conservació i restauració. Segons la distribució d'espècies i els trets de les plantes, les comunitats vegetals i la seua dinàmica presenten diferents característiques en l'ecosistema ripario, a les quals els mètodes de detecció i monitoratge han d'adaptar-se. Els constants canvis que pateixen aquests espais al llarg del temps es deuen en gran part a processos físics relacionats amb les dinàmiques d'erosió i sedimentació, les variacions de la trajectòria del llit, variacions en la distribució d'espècies i vegetació en el bosc de ribera, etc., però també es deuen a l'impacte antropogènic, que pot arribar a generar grans desajustaments en la dinàmica ecològica dels ecosistemes en qüestió. A causa de les interaccions de diversos processos i alteracions antropogèniques, i les complexes dinàmiques espaciotemporals, resulta necessari continuar desenvolupant metodologies teòriques i pràctiques per al monitoratge i caracterització d'aquests ecosistemes. La teledetecció, incloent l'ús de drons, es presenta com una eina molt interessant i òptima per al mapatge i recollida d'informació en aquests espais naturals. Els beneficis que demostren les aeronaus no tripulades -UAV- inclouen les millores en la resolució espacial i temporal de les dades capturades, així com la cartografia d'àrees extenses en poc temps, la qual cosa els converteix en instruments clau en tasques de gestió i conservació dels espais riparis. La necessitat d'estudiar la dinàmica geomorfològica que es produeix en els llits fluvials ha sigut la principal motivació en els estudis que es presenten en aquesta tesi doctoral. Els capítols 2 i 3 es basen en tècniques de captura de dades amb làser escàner terrestre (TLS) i en el modelatge de les dades obtingudes en vols fotogramètrics de UAV. Amb ells s'han caracteritzat els processos que tenen lloc en una certa àrea d'estudi, un llit efímer del sud-est de la Península Ibèrica, la Rambla de la Azohía (Múrcia). Aquests estudis també han permés comparar l'ajust i precisió de les dades capturades a partir de dues tècniques diferents. A més, l'interés a caracteritzar els llits fluvials amb un flux permanent ha motivat l'estudi de la topografia submergida en un tram de riu, segmentat per tipus de mesohábitat. Així doncs, el capítol 4 presenta un algorisme i una eina de correcció per a l'efecte de la refracció en un tram del va riure Palància (Castelló), per a dur a terme la correcta representació de la morfologia del llit submergit. A partir de la metodologia plantejada i l'algorisme desenvolupat, és possible minimitzar els efectes de distorsió deguts a la presència de l'aigua, per a obtindre la reconstrucció tridimensional del llit a partir d'imatges preses amb UAV. La construcció del model 3D es va dur a terme mitjançant la tècnica de Structure from Motion. Finalment, i com a element clau en la dinàmica dels ecosistemes riparis, el capítol 5 desenvolupa una metodologia per a classificar les fases de successió de la vegetació del bosc ripari. Aquestes fases de successió es basen en la metodologia del projecte RIPFLOW, que també està implementada en el model dinàmic CASiMiR-vegetation.[EN] Riparian ecosystems show great variability, from a geomorphological, hydrological and ecological point of view, including the complex interactions that riparian morphology and vegetation can present. Vegetation appears as a very influential physical factor in river systems, with a direct relationship in the geomorphological processes that take place in river corridors. The detection, monitoring and evaluation of the processes that take place in the riparian space are key when it comes to understanding the ecological functions and development of these habitats, and therefore for making decisions for their conservation and restoration. According to the distribution of species and plant traits, plant communities and their dynamics present different characteristics in the riparian ecosystem, to which detection and monitoring methods must be adapted. The constant changes that these spaces undergo over time are largely due to physical processes related to the dynamics of erosion and sedimentation, variations in the path of the channel, variations in the distribution of species and vegetation in the riparian forest, etc. These processes also are due to the anthropogenic impact, which can generate major imbalances in the ecological dynamics of the ecosystems in question. Due to the interactions of various anthropogenic processes and alterations, and the complex spatio-temporal dynamics, it is necessary to continue developing theoretical and practical methodologies for the monitoring and characterization of these ecosystems. Remote sensing, including the use of drones, is presented as a very interesting and optimal tool for mapping and collecting information in these natural spaces. The benefits demonstrated by unmanned aircraft -UAV- include improvements in the spatial and temporal resolution of the captured data, as well as the mapping of large areas in a short time, which makes them key instruments in the management and conservation tasks of riparian spaces. The need to study the geomorphological dynamics that occur in river channels has been the main motivation in the studies presented in this doctoral thesis. Chapters 2 and 3 are based on ground-based laser scanner (TLS) data capture techniques and modelling of UAV photogrammetric flight data. They have characterized the processes that take place in a certain study area, an ephemeral riverbed in the southeast of the Iberian Peninsula, the Rambla de la Azohía (Murcia). These studies have also made it possible to compare the fit and precision of the data captured from two different techniques. In addition, the interest in characterizing the fluvial channels with a permanent flow has motivated the study of the submerged topography in a stretch of river, segmented by types of mesohabitat. Thus, chapter 4 presents an algorithm and a correction tool for the effect of refraction in a stretch of the Palancia river (Castellón), to carry out the correct representation of the submerged bed morphology. From the proposed methodology and the developed algorithm, it is possible to minimize the distortion effects due to the presence of water, to obtain the three-dimensional reconstruction of the bed from images taken with UAVs. The construction of the 3D model was carried out using the Structure from Motion technique. Finally, and as a key element in the dynamics of riparian ecosystems, chapter 5 develops a methodology to classify the phases of succession of riparian forest vegetation. These succession phases are based on the RIPFLOW project methodology, which is also implemented in the dynamic CASiMiR-vegetation model.Agradezco a Francisca Segura y a Carles Sanchis por su ayuda y trabajo conjunto en el proyecto “Natural and anthropogenic changes in Mediterranean river drainage basins: historical impacts on rivers morphology, sedimentary flows and vegetation” financiado por el Ministerio de Economía y Competitividad (MINECO) (CGL2013-44917-R). Agradezco también a la Universidad de Murcia y la Universidad de Alicante así como al proyecto de investigación “Respuesta morfológica y sistémica al cambio climático en cauces efímeros mediterráneos: dinámica, resiliencia y propuestas de actuación” funded by ERDF/Spanish Ministry of Science, Innovation and Universities—State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, del Ministerio de Economía y Competitividad (MINECO) y EU FEDER (Project TEC2017- 85244-C2-1-P) y de la Universidad de Alicante (vigrob-157 and GRE18-05).Puig Mengual, CA. (2021). Remote Sensing and UAVs for the Geomorphological and Habitat Analysis in Ephemeral and Permanent Mediterranean Streams [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/177643TESISCompendi
    corecore