Impact on signal integrity of interconnect variabilities

In this paper, literature results on the statistical simulation of lossy and dispersive interconnect networks with uncertain physical properties are extended to general nonlinear circuits. The approach is based on the expansion of circuit voltages and currents into polynomial chaos approximations. The derivation of deterministic circuit equivalents for nonlinear components allows to retrieve the unknown expansion coefficients with a single circuit simulation, that can be carried out via standard SPICE-type solvers. These coefficients provide direct statistical information. The methodology allows the inclusion of arbitrary nonlinear elements and is validated via transmission-line networks terminated by diodes and driven by inverter

Worst-Case Analysis of Electrical and Electronic Equipment via Affine Arithmetic

In the design and fabrication process of electronic equipment, there are many unkown parameters which significantly affect the product performance. Some uncertainties are due to manufacturing process fluctuations, while others due to the environment such as operating temperature, voltage, and various ambient aging stressors. It is desirable to consider these uncertainties to ensure product performance, improve yield, and reduce design cost. Since direct electromagnetic compatibility measurements impact on both cost and time-to-market, there has been a growing demand for the availability of tools enabling the simulation of electrical and electronic equipment with the inclusion of the effects of system uncertainties. In this framework, the assessment of device response is no longer regarded as deterministic but as a random process. It is traditionally analyzed using the Monte Carlo or other sampling-based methods. The drawback of the above methods is large number of required samples to converge, which are time-consuming for practical applications. As an alternative, the inherent worst-case approaches such as interval analysis directly provide an estimation of the true bounds of the responses. However, such approaches might provide unnecessarily strict margins, which are very unlikely to occur. A recent technique, affine arithmetic, advances the interval based methods by means of handling correlated intervals. However, it still leads to over-conservatism due to the inability of considering probability information. The objective of this thesis is to improve the accuracy of the affine arithmetic and broaden its application in frequency-domain analysis. We first extend the existing literature results to the efficient time-domain analysis of lumped circuits considering the uncertainties. Then we provide an extension of the basic affine arithmetic to the frequency-domain simulation of circuits. Classical tools for circuit analysis are used within a modified affine framework accounting for complex algebra and uncertainty interval partitioning for the accurate and efficient computation of the worst case bounds of the responses of both lumped and distributed circuits. The performance of the proposed approach is investigated through extensive simulations in several case studies. The simulation results are compared with the Monte Carlo method in terms of both simulation time and accuracy

Resonance frequency tuning in vibration-based energy harvesting systems

Energy harvesting technologies that rely on the conversion of ambient vibration into a usable form of energy have become the subject of significant research in recent years . The most common types of transduction methods are piezoelectric, electromagnetic and electrostatic. Among these three methods, piezoelectric convertors have been recognized to offer more benefits. They have presented a potential solution to the problem of power systems which have a short battery life and high maintenance costs. Battery replacement is more of a problem for Micro Electro Mechanical Systems (MEMS). For some applications, often it is not practical to replace the dead battery because they are not easily accessible. Therefore, the concept of low-power MEMS devices that are able to scavenge, or harvest energy from their operating environment have gained growing attention over recent years. In this thesis, an overview of energy harvesting technology based on different transduction methods is presented and discussed in detail. Most energy harvesters are designed to work at resonance frequency in order to obtain maximum output power, and they are usually manufactured to have resonance frequencies that match the frequencies of excitation. However, in some cases, there is a mismatch between the resonance and excitation frequencies due to manufacturing errors or changes in the working environment. Particularly, in MEMS devices due to the fabrication process such as mask alignment, deposition, photolithography, etching and drying, manufacturing tolerances are generally high and, in some cases, can be higher than ±10% of nominal values. Therefore, parameter uncertainty can significantly affect the performance of MEMS devices. To overcome this problem, a MEMS piezoelectric harvester with electrostatically adjustable resonance frequency is proposed. The main aim is to control the resonance frequency of the piezoelectric harvester with the application of a DC voltage to the electrostatic system in order to maximize the harvested power. Based on the voltage applied to the electrostatic system, the resonance frequency of the harvester can be adjusted through hardening and softening mechanisms. The problem addressed in this thesis is non-linear due to electrostatic forces. Moreover, by considering uncertainty in the model parameters; we are dealing with a dynamic problem with the effects of both nonlinearities and uncertainties which has not received significant attention in the literature. In this study, for the first time to our knowledge, the shooting method in conjunction with Monte Carlo Simulation has been used to solve a nonlinear uncertain problem. In addition, due to the similarity between electrostatic and electromagnetic forces, an experimental set-up based on the nonlinear electromagnetic forces has been designed to show the concept of the proposed model in macro scales. The experimental results have been verified numerically and it has been shown that the proposed model has great potential in practical applications

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Novel Multicarrier Memory Channel Architecture Using Microwave Interconnects: Alleviating the Memory Wall

abstract: The increase in computing power has simultaneously increased the demand for input/output (I/O) bandwidth. Unfortunately, the speed of I/O and memory interconnects have not kept pace. Thus, processor-based systems are I/O and interconnect limited. The memory aggregated bandwidth is not scaling fast enough to keep up with increasing bandwidth demands. The term "memory wall" has been coined to describe this phenomenon. A new memory bus concept that has the potential to push double data rate (DDR) memory speed to 30 Gbit/s is presented. We propose to map the conventional DDR bus to a microwave link using a multicarrier frequency division multiplexing scheme. The memory bus is formed using a microwave signal carried within a waveguide. We call this approach multicarrier memory channel architecture (MCMCA). In MCMCA, each memory signal is modulated onto an RF carrier using 64-QAM format or higher. The carriers are then routed using substrate integrated waveguide (SIW) interconnects. At the receiver, the memory signals are demodulated and then delivered to SDRAM devices. We pioneered the usage of SIW as memory channel interconnects and demonstrated that it alleviates the memory bandwidth bottleneck. We demonstrated SIW performance superiority over conventional transmission line in immunity to cross-talk and electromagnetic interference. We developed a methodology based on design of experiment (DOE) and response surface method techniques that optimizes the design of SIW interconnects and minimizes its performance fluctuations under material and manufacturing variations. Along with using SIW, we implemented a multicarrier architecture which enabled the aggregated DDR bandwidth to reach 30 Gbit/s. We developed an end-to-end system model in Simulink and demonstrated the MCMCA performance for ultra-high throughput memory channel. Experimental characterization of the new channel shows that by using judicious frequency division multiplexing, as few as one SIW interconnect is sufficient to transmit the 64 DDR bits. Overall aggregated bus data rate achieves 240 GBytes/s data transfer with EVM not exceeding 2.26% and phase error of 1.07 degree or less.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Architectural level delay and leakage power modelling of manufacturing process variation

PhD ThesisThe effect of manufacturing process variations has become a major issue regarding the estimation of circuit delay and power dissipation, and will gain more importance in the future as device scaling continues in order to satisfy market place demands for circuits with greater performance and functionality per unit area. Statistical modelling and analysis approaches have been widely used to reflect the effects of a variety of variational process parameters on system performance factor which will be described as probability density functions (PDFs). At present most of the investigations into statistical models has been limited to small circuits such as a logic gate. However, the massive size of present day electronic systems precludes the use of design techniques which consider a system to comprise these basic gates, as this level of design is very inefficient and error prone. This thesis proposes a methodology to bring the effects of process variation from transistor level up to architectural level in terms of circuit delay and leakage power dissipation. Using a first order canonical model and statistical analysis approach, a statistical cell library has been built which comprises not only the basic gate cell models, but also more complex functional blocks such as registers, FIFOs, counters, ALUs etc. Furthermore, other sensitive factors to the overall system performance, such as input signal slope, output load capacitance, different signal switching cases and transition types are also taken into account for each cell in the library, which makes it adaptive to an incremental circuit design. The proposed methodology enables an efficient analysis of process variation effects on system performance with significantly reduced computation time compared to the Monte Carlo simulation approach. As a demonstration vehicle for this technique, the delay and leakage power distributions of a 2-stage asynchronous micropipeline circuit has been simulated using this cell library. The experimental results show that the proposed method can predict the delay and leakage power distribution with less than 5% error and at least 50,000 times faster computation time compare to 5000-sample SPICE based Monte Carlo simulation. The methodology presented here for modelling process variability plays a significant role in Design for Manufacturability (DFM) by quantifying the direct impact of process variations on system performance. The advantages of being able to undertake this analysis at a high level of abstraction and thus early in the design cycle are two fold. First, if the predicted effects of process variation render the circuit performance to be outwith specification, design modifications can be readily incorporated to rectify the situation. Second, knowing what the acceptable limits of process variation are to maintain design performance within its specification, informed choices can be made regarding the implementation technology and manufacturer selected to fabricate the design

Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin